Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Operating voltage [V]: 12
- Number of connectors: 3
Lisainfo: Relay for turn signal and emergency light, 12 Volt, 4x21 W Additional information: Relay for turn signal and emergency light, 12 Volt, 4x21 W
- Operating voltage [V]: 12
- Rated Power [W]: 120
- Rated current [A]: 10
- Combi Switch Function: Normally Open Contact
- Length [mm]: 30
- Width [mm]: 30
- Height [mm]: 42
-
Connector type: 1x 2,
8 mm, 5x 6, 3 mm - Number of pins: 6
- Manufacturer: JP GROUP
-
Lisainfo: Relay for wiper/
washer -
Additional information: Relay for wiper/
washer
- Operating Mode: Electric
- Voltage [V]: 12
- Manufacturer: DELLO AUTOMEGA
- Supplementary Article/Supplementary Info: without holder
- Housing Type: Synthetic Material Housing
- Number of pins: 5
- Rated Voltage [V]: 12
- Rated current [A]: 30
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: 100
- General Information: relay
- Manufacturer: VIKA
Combi Switch Function: without light dimmer function, Normally Open Contact
- Number of connectors: 4
- Rated Voltage [V]: 12
- Rated current [A]: 40
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: 85
- General Information: relay
- Manufacturer: VIKA
-
Vehicle Identification Number (VIN) to: 53-
B- 050 000 -
Vehicle Identification Number (VIN) from: 178 3000 001,
538 2000 001 - Voltage [V]: 12
- Number of pins: 6
- Manufacturer: DELLO AUTOMEGA
- General Information: relay
- Manufacturer: BORSEHUNG
- Vehicle Equipment: for vehicles without trailer hitch
-
Relay Number: 21,
191 - Voltage [V]: 12
- Rated Power [W]: 21
- Number of connectors: 3
- Colour: black
- Material: Plastic
- Operating Mode: Electronic
- Weight [kg]: 0.032
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
General Information: control unit for wiper/
washing automatic intervals - Manufacturer: VIKA
- Voltage [V]: 12
- Number of pins: 6
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Vehicle Equipment: for vehicles without trailer hitch
- Voltage [V]: 12
- Switching Capacity [W]: 21
-
Mounting Type: Flat Plug-
in Connector - Operating Mode: Electric
- Number of pins: 3
- Plug Type: Blade Terminal
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Operating voltage [V]: 12
- Switching Capacity [W]: 4x21
- General Information: control unit for radiator fan
- Manufacturer: VIKA
- Operating voltage [V]: 12
- Rated Power [W]: 120
- Rated current [A]: 10
- Combi Switch Function: Normally Open Contact
- Length [mm]: 30
- Width [mm]: 30
- Height [mm]: 42
-
Connector type: 1x 2,
8 mm, 5x 6, 3 mm - Number of pins: 6
- Manufacturer: MEYLE
- Vehicle Equipment: for vehicles with trailer hitch
- Relay Number: 22
- Voltage [V]: 12
- Number of connectors: 4
- Operating Mode: Electric
- Weight [kg]: 0.03
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Voltage [V]: 12
- Operating Mode: Electric
- Vehicle Equipment: for vehicles with factory mounted tow bar
- Number of pins: 4
- Weight [kg]: 0.023
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Mounting Type: Plugged
- Operating Mode: Electronic
-
Switching Capacity [W]: 2
(4)x21W+0...5 - Number of pins: 3
- Voltage [V]: 12
- Registration Type: ECE approved
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: 70
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 4DB003750711
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Construction Year from: 08.1975
- Voltage [V]: 12
- Number of pins: 6
- Weight [kg]: 0.04
- Fitting Position: Engine Compartment
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 06.1974
- Length [mm]: 30.5
- Width [mm]: 30.5
- Height [mm]: 57
- Operating Mode: Electric
- Vehicle Equipment: for vehicles without trailer hitch
- Manufacturer: BOSCH
- Mounting Type: mounting
- Operating Mode: Electronic
-
Switching Capacity [W]: 2+1
(6)x21W+5 EP - Number of pins: 4
- Voltage [V]: 12
- Supplementary Article/Info 2: for trailer
- Supplementary Article/Supplementary Info: with holder
- Registration Type: ECE approved
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: 85
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Construction Year from: 01.1977
-
Vehicle Identification Number (VIN) from: F1783000000,
F5382000000 - Voltage [V]: 12
- Weight [kg]: 0.038
- Fitting Position: Engine Compartment
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 08.1975
- Supplementary Article/Supplementary Info: without holder
- Voltage [V]: 12
-
Temperature range from [°C]: -
30 - Temperature range to [°C]: +85
- Number of pins: 6
- Assy./disassy. by qualified personnel required!:
- Name: HE 5WG003620097
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Construction Year from: 08.1975
- Supplementary Article/Supplementary Info: without holder
- Voltage [V]: 12
-
Temperature range from [°C]: -
30 - Temperature range to [°C]: +85
- Number of pins: 6
- Assy./disassy. by qualified personnel required!:
- Name: HE 5WG003620091
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Construction Year from: 06.1974
- Trailer Hitch: for trailer hitch
- Operating Mode: Electric
- Manufacturer: BOSCH
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks