Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Inner Diameter [mm]: 19.5
- Thickness [mm]: 3.5
- Material: Rubber
- for OE number: 7198663
- Manufacturer: DELLO AUTOMEGA
- Inner Diameter [mm]: 19.5
- Thickness [mm]: 3.5
- Weight [kg]: 0.001
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Vehicle Identification Number (VIN) from: 53A 0000 001
- Thread Size: M10x1
- Colour: black
- Number of pins: 1
- Spanner Size: 14
- Length [mm]: 25
- Manufacturer: DELLO AUTOMEGA
- Sensor Type: NTC Sensor
- Mounting Type: Bolted
- Connector Shape: round
- Number of pins: 1
- Spanner Size: 14
- Thread Size: M10x1
- for OE number: 027919501
- Supplementary Article/Info 2: with seal ring
- Manufacturer: NRF
- Construction Year to: 08.1978
- Number of connectors: 2
- Switch point from [°C]: 92
- Switch point to [°C]: 87
- Lisainfo: Thermo switch for fan
- Additional information: Thermo switch for fan
- Climate Zones: for hot climate zones
- Vehicle Equipment: for vehicles with trailer hitch
- Switch-on point [°C]: 95
- Shut-off Point [°C]: 84
- Number of pins: 2
-
Thread Size: M22X1,
5 - Connector Shape: angular
- Manufacturer: DELLO AUTOMEGA
- Construction Year to: 07.1978
- Operating temperature from [°C]: 92
- Operating temperature to [°C]: 87
- Thread Size: M22x1.5
-
Sensor Type: Open-
style sensor - Manufacturer: CALORSTAT BY VERNET
- Additional information: TS6994
- Lisainfo: TS6994
- Engine Code: FA
- Thread Size: M10x1
- Spanner Size: 13
- Name: EP 1.830.073
- Manufacturer: EPS
- Thread Size: M10x1.0
- Manufacturer: VERNET
- Colour: grey
- Spanner Size: 29
- for OE number: 4086708
- Manufacturer: KAMOKA
- Spanner Size: 29
- for OE number: 191959481
- Manufacturer: KAMOKA
- Colour: black
- Number of pins: 1
- Weight [kg]: 0.3
- Packaging length [cm]: 12
- Packaging width [cm]: 8
- Packaging height [cm]: 6
-
Vehicle Identification Number (VIN) from: 53-
B- 200 001 - Mounting Type: Bolted
- Voltage [V]: 12
- Thread Size: M10x1
- Spanner Size: 13
- Sensor Type: NTC Sensor
- Number of pins: 1
- Corresponds to the original part in colour: black
- Temperature range from [°C]: 0
- Temperature range to [°C]: 125
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Manufacturer: HELLA
- Name: HE 6PT009309441
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Construction Year from: 08.1978
- Operating temperature from [°C]: 94
- Operating temperature to [°C]: 84
- Thread Size: M22x1.5
-
Sensor Type: Open-
style sensor - Manufacturer: CALORSTAT BY VERNET
-
External Thread Size: M22 x 1,
5 - Spanner Size: 29
- Number of connectors: 2
- Colour Coding: black
- Temperature range from [°C]: 90
- Temperature range to [°C]: 95
- Weight [kg]: 0.061
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of pins: 2
- Plug Type: Blade Terminal
- Socket colour: black
- Connector Shape: round
- Shut-off Point [°C]: 92
- Switch Point [°C]: 87
-
Thread Size: M22x1,
5 mm - Spanner Size: 29 mm
- Manufacturer: MEAT&DORIA
- Number of pins: 2
- Plug Type: Blade Terminal
- Socket colour: white
- Connector Shape: oval
- Shut-off Point [°C]: 95
- Switch Point [°C]: 90
-
Thread Size: M22x1,
5 mm - Spanner Size: 29 mm
- for OE number: 191 959 481
- Manufacturer: MEAT&DORIA
- Switch Point [°C]: 84
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Thread Size: M22 x 1,
5 - Spanner Size: 29
- Number of pins: 2
- Switch point from [°C]: 95
- Switch point to [°C]: 84
- Manufacturer: ERA
- Engine Code: FA
- Temperature range from [°C]: 95
- Temperature range to [°C]: 90
-
Thread Size: M22x1,
5 - Spanner Size: 29
- Name: EP 1.850.027
- Manufacturer: EPS
- Diameter [mm]: 29
- Height [mm]: 42.7
-
Thread Size: M22x1,
5 - Supplementary Article/Supplementary Info: with seal
- Number of pins: 2
- Switch point from [°C]: 95
- Switch point to [°C]: 84
- Weight [kg]: 0.067
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Thread Size: M22x1,
5 - Spanner Size: 29
- Supplementary Article/Supplementary Info: with seal
- Number of pins: 2
- Colour Coding: white
- Switch point from [°C]: 92
- Switch point to [°C]: 87
- Weight [kg]: 0.057
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- not as standard:
- Thread Size: M22x1.5
- Number of pins: 2
- Tightening Torque [Nm]: 70
- Supplementary Article/Supplementary Info: with seal
- Switch-on point [°C]: 70
- Shut-off Point [°C]: 65
- Packaging width [cm]: 3.5
- Packaging length [cm]: 3.7
- Net Weight [g]: 42
- Packaging height [cm]: 7.2
- Manufacturer: MAHLE
General Information: SIMPLE FIT - Installation accessories, such as O-rings, seals, screws, nuts, bolts, and hose clips, are included with the product.