• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• Oxygen Sensor: Heated
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Takistus [oom]: 9
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV909
• Manufacturer: ESEN SKV

• Engine Code: AZJ
• Construction Year from: 05.2001
• Oxygen Sensor: Diagnostic Probe, Finger-type Sensor
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: AZH
• Construction Year to: 06.2001
• Oxygen Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Number of circuits: 5
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-AU-002
• Manufacturer: NTY
• Name: NTY ESL-AU-002

• Construction Year to: 05.2004
• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Engine Code: AZJ, AZG
• Cable Length [mm]: 1,530
• Name: LAMBDA ANDUR
• Manufacturer: DLP

Additional information: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)"

• Construction Year to: 04.2001
• Fitting Position: after catalytic converter
• Cable Length [mm]: 909
• Oxygen Sensor: Planar Sensor, Heated
• Manufacturer: DELPHI
• Name: DE ES20178-12B1

• Engine Code: AZH
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: Front
• Length [mm]: 940
• Number of connectors: 4
• Manufacturer: VERNET

• Engine Code: AZH
• Construction Year to: 06.2001
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• Socket colour: black
• Number of circuits: 4
• Connector Shape: D Shape
• Cable Length [mm]: 625
• Thread Size: M18 x 1,5
• for OE number: 021 906 262 C
• Length [mm]: 800
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Version: ZR-PLANAR
• Fitting Position: after catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 05.2001
• Lambda andur: Diagnoosisond
• Pinge [V]: 12
• Pikkus (mm): 760
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,15
• Takistus [oom]: 9
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV694
• Manufacturer: ESEN SKV

• Engine Code: AZH
• Oxygen Sensor: Diagnostic Probe, Unheated
• Number of pins: 4
• Cable Length [mm]: 630
• Quality: OE EQUIVALENT
• for OE number: 06A906262AS
• Manufacturer: MEAT&DORIA

• Engine Code: AZH, AZJ
• Oxygen Sensor: Diagnostic Probe
• Ülekandeliinide arv: 4
• Piirangutega toode/piirangu info 2: ilma pistikuta
• Name: LAMBDA ANDUR
• Manufacturer: NTK

• Oxygen Sensor: Heated
• Number of pins: 4
• Total Length [mm]: 780
• Manufacturer: ERA

• Oxygen Sensor: Diagnostic Probe, Planar Sensor, Heated
• Engine Code: AZJ, AZG
• Cable Length [mm]: 700
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
BORA (1J2), 10.98-09
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
BORA (1J2), 10.98-09
(kvaliteediklass: PJ)"

• Engine Code: AZH
• Construction Year to: 06.2001
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Length [mm]: 750
• Technical Information Number: Universal 77015
• Socket colour: black
• Manufacturer: FAE

• Construction Year to: 06.2001
• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Pikkus (mm): 760
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,15
• Takistus [oom]: 9
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV644
• Manufacturer: ESEN SKV

• Construction Year from: 05.2001
• Engine Code: AZJ
• Oxygen Sensor: Unheated
• Number of pins: 4
• Cable Length [mm]: 1,050
• Quality: OE EQUIVALENT
• for OE number: 058906265B
• Manufacturer: MEAT&DORIA

• Oxygen Sensor: Heated
• Recommended change interval [km]: 160,000
• Number of pins: 4
• Overall Length [mm]: 470
• General Information: Lambda sensor; 4 wire
• Manufacturer: VIKA

• Engine Code: AZH
• Construction Year to: 06.2001
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Oxygen Sensor: Diagnostic Probe, Planar Sensor, Heated
• Fitting Position: after catalytic converter
• Engine Code: AZJ
• Cable Length [mm]: 740
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Construction Year to: 06.2001
• Engine Code: AZH
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Engine Code: AZJ
• Construction Year from: 05.2001
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 05.2001
• Lambda andur: Diagnoosisond
• Pinge [V]: 12
• Pikkus (mm): 800
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,15
• Takistus [oom]: 6
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV705

• Oxygen Sensor: Heated
• Recommended change interval [km]: 160,000
• Number of pins: 4
• Overall Length [mm]: 330
• General Information: Lambda sensor; 4 wire
• Manufacturer: VIKA

• Lambda andur: Bistabiilne andur
• Kaablipikkus (mm): 290
• valikuliselt:
• Ülekandeliinide arv: 4
• alternatiivne remondikomplekt: 570112
• Manufacturer: ERA

• Fitting Position: after catalytic converter
• Cable Length [mm]: 954
• Oxygen Sensor: Planar Sensor, Heated
• Manufacturer: DELPHI
• Name: DE ES20169-12B1

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Length [mm]: 700
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Construction Year from: 05.2001
• Construction Year to: 06.2005
• Engine Code: AZJ
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• Socket colour: black
• Connector Shape: D Shape
• Length [mm]: 700
• for OE number: 030 906 262 L
• Thread Size: M18 x 1,5
• Cable Length [mm]: 700
• Number of circuits: 4
• Manufacturer: VEMO GERMANY

Oxygen Sensor: Diagnostic Probe, Regulating Sensor, Thread pre-greased Fitting Position: after catalytic converter, before catalytic converter General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AZH, AZJ
• Construction Year to: 06.2005
• Oxygen Sensor: Regulating Sensor, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Length [mm]: 1,500
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Construction Year to: 06.2001
• Engine Code: AZH
• Line insulation design: with silicone-coated woven-fibre insulation
• Overall Length [mm]: 1,800
• Number of pins: 4
• Recommended change interval [km]: 160,000
• Oxygen Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 06.2001
• Engine Code: AZH
• Thread Size: M18x1.5
• Cable Length [mm]: 800
• Number of pins: 4
• Manufacturer Restriction: DENSO
• for OE number: 06C906265
• Quality: OE
• Weight [g]: 115
• Gross Weight [g]: 148
• Manufacturer: DENSO
• Name: DN DOX-2008
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)"

• Oxygen Sensor: Heated
• Length [mm]: 645
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 740
• Weight [kg]: 0.095
• Name: SW 30 93 4388
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Engine Code: AZJ
• Construction Year from: 05.2001
• Length [mm]: 720
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Engine Code: AZH
• Construction Year to: 06.2001
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 760
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Length [mm]: 1,500
• Number of pins: 6
• for article number: 77030
• Manufacturer: FAE

• Fitting Position: before catalytic converter
• Rated Voltage [V]: 12
• Number of pins: 6
• Connector Shape: oval
• Cable Length [mm]: 1,510
• Overall Length [mm]: 1,538
• Spanner Size: 22
• Thread Size: M 18
• Thread Pitch [mm]: 1.5
• Supplementary Article/Supplementary Info: with cable tie
• Supplementary Article/Info 2: with plastic socket, with heat shield pipe
• Lubrication: with grease lubrication
• Full Set:
• Manufacturer: TOPRAN

Oxygen Sensor: Regulating Sensor, Broadband Oxygen Sensor, Heated, Planar Sensor General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: AZH
• Construction Year to: 06.2001
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Length [mm]: 950
• Number of circuits: 4
• Manufacturer: VDO

• Engine Code: AZH
• Construction Year to: 06.2001
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 730
• Connector Shape: D Shape
• Conductor Number: 4
• Cable Length [mm]: 600
• Thread Size: M18 x 1,5
• Housing Colour: black
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Version: ZR-PLANAR
• Fitting Position: after catalytic converter
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 1,510
• Conductor Number: 5
• Number of circuits: 5
• Cable Length [mm]: 1,510
• Oxygen Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Oxygen Sensor: Heated
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Number of pins: 4
• Overall Length [mm]: 750
• General Information: Lambda sensor
• Manufacturer: BORSEHUNG

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Värv: punane
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 5
• Kaal (kg): 0,15
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Fitting Position: before catalytic converter
• Cable Length [mm]: 950
• Name: LAMBDA ANDUR
• Manufacturer: DLP

Oxygen Sensor: Regulating Sensor, Switching-type Oxygen Sensor, Heated

• Engine Code: AZH
• Oxygen Sensor: Diagnostic Probe, Heated
• Voltage [V]: 12
• Conductor Number: 4
• Cable Length [mm]: 940
• Manufacturer: PIERBURG

• Oxygen Sensor: Heated
• Conductor Number: 5
• General Information: Lambda sensor; 5 wire
• Manufacturer: VIKA

• Oxygen Sensor: Switching-type Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Name: CE 09SKV915
• Manufacturer: ESEN SKV

• Oxygen Sensor: Regulating Sensor
• Exhaust System: before catalytic converter
• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Garantii: 3 aastat garantii
• Kaal (kg): 0,16
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV907
• Manufacturer: ESEN SKV

• Number of pins: 5
• Connector Shape: D Shape
• Cable Length [mm]: 1,360
• Fitting Position: Exhaust Manifold
• Oxygen Sensor: Broadband Oxygen Sensor
• Quality: OE EQUIVALENT
• for OE number: 022906262H
• Manufacturer: MEAT & DORIA

• Construction Year to: 06.2005
• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Sensor
• Cable Length [mm]: 1,500
• Number of pins: 6
• Exhaust System: before catalytic converter
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years. Name: SONDA LAMBDA VV GOLF IV, TRANSPORTER, PHAETON 1,4-6,0 97-

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 760
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Fitting Position: Front
• Line insulation design: with silicone-coated woven-fibre insulation
• Conductor Number: 5
• Thread Size: M18 x 1,5
• Connector Shape: D Shape
• Cable Length [mm]: 1,510
• Supplementary Article/Supplementary Info: with cable tie
• Oxygen Sensor: Broadband Oxygen Sensor, Thread pre-greased
• Number of circuits: 5
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.