• Material: Plastic
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Engine Code: AZH, AZJ
• Vehicle Identification Number (VIN) to: 1J-1-900 000
• Block Separation:
• Thickness [mm]: 3.5
• Inner Diameter [mm]: 19.5
• Material: NBR (nitrile butadiene rubber)
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Fitting Position: Left
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Material: Plastic
• Weight [kg]: 0.015
• Required quantity: 1
• General Information: retaining spring
• Manufacturer: VIKA

• Material: Plastic
• Name: STOPPER
• Manufacturer: MAX

• Engine Code: AZH, AZJ
• Vehicle Identification Number (VIN) to: 1J-1-900 000
• Block Separation:
• Thickness [mm]: 3.5
• Inner Diameter [mm]: 19.5
• Material: NBR (nitrile butadiene rubber)
• Weight [kg]: 0.003
• Name: TIHEND,JAHUTUSVEDEDELIKUFLANTS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: AZH
• Material: Rubber
• Weight [kg]: 0.003
• Name: TIHEND,JAHUTUSVEDEDELIKUFLANTS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Material: Plastic
• Weight [kg]: 0.015
• Name: KINNITUSVEDRU, JAHUTUSVEDELIKUFLANTS-SULGURKORK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: engine sided
• Seal Diameter [mm]: 50
• Thickness [mm]: 3.15
• Shape: O Shape
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• Width [mm]: 32
• Thickness [mm]: 1.98
• Material: Steel
• Weight [kg]: 0.001
• Name: KINNITUSVEDRU, JAHUTUSVEDELIKUFLANTS-SULGURKORK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Supplementary Info: with accessories
• Name: SULGURKORK, JAHUTUSVEDELIKUFLANTS
• Manufacturer: MAX

• Fitting Position: engine sided
• Seal Diameter [mm]: 50
• Thickness [mm]: 3.15
• Shape: O Shape
• Surface: nubby
• Name: TIHEND,JAHUTUSVEDEDELIKUFLANTS
• Manufacturer: HAN

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Cylinder Head
• Inner Diameter [mm]: 50
• Outer Diameter [mm]: 56.3
• Thickness [mm]: 3.15
• Shape: O-Ring
• Manufacturer: ELRING

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• for OE number: 1J0 122 291 B
• Fabrication Number: CTM-VW-023

• Thickness [mm]: 3.15
• Inner Diameter [mm]: 36
• Material: Rubber
• Weight [kg]: 0.003
• Name: TIHEND,JAHUTUSVEDEDELIKUFLANTS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of inlets/outlets: 4
• Material: GRP (Glass fibre Reinforced Plastic)
• for OE number: 1J0 121 087C
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of flange connections: 4
• Manufacturer: DELLO AUTOMEGA

• Vehicle Equipment: for vehicles with air conditioning
• Construction Year to: 12.2001
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Supplementary Info: with seal
• Number of inlets/outlets: 3
• for OE number: 1J0 122 291B
• Consult accessories list for recommended additional repairs:
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Material: GRP (Glass fibre Reinforced Plastic)
• for OE number: 1J0 121 087C
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: MAX

• Fitting Position: Upper
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: MAX

• Supplementary Article/Supplementary Info: with seal
• Material: GRP (Glass fibre Reinforced Plastic)
• for OE number: 3B0 122 291B
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: MAX

• Supplementary Article/Supplementary Info: with seal
• Material: Plastic
• Fitting Position: Front
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Upper
• Manufacturer: JP GROUP
• Lisainfo: Quick coupling piece
• Additional information: Quick coupling piece

• Housing material: Plastic
• Colour: black
• Number of inlets/outlets: 3
• Supplementary Article/Supplementary Info: with seal
• for OE number: 06A121132
• Manufacturer: DELLO AUTOMEGA

• Material: Plastic
• Fabrication Number: CTM-VW-009

• for OE number: 1J0121087A
• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Weight [g]: 63
• Supplementary Article/Info 2: without thermostat
• Name: IM 90306
• Manufacturer: ORIGINAL IMPERIUM

• Material: Plastic
• Fitting Position: transmission sided, Cylinder Head
• Supplementary Article/Info 2: with seal ring
• Heating/Cooling: with thermal switch connector
• Name: Jahutusvedeliku flants
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front
• Supplementary Article/Supplementary Info: with seal
• Material: Plastic
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: MAX

• Material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Supplementary Info: with seal
• Number of inlets/outlets: 2
• for OE number: 1J0 122 291
• Consult accessories list for recommended additional repairs:
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Material: Plastic
• Fitting Position: Left
• Weight [kg]: 0.12
• Required quantity: 1
• General Information: pipe union
• Manufacturer: VIKA

• Material: GRP (Glass fibre Reinforced Plastic)
• Number of inlets/outlets: 4
• General Information: distributor
• Manufacturer: VIKA

• Fitting Position: Radiator, Lower
• Material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Supplementary Info: with seal
• Number of inlets/outlets: 2
• Supplementary Article/Info 2: with bracket, with breather valve
• for OE number: 6Q0 122 291F
• Consult accessories list for recommended additional repairs:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Cylinder Head
• Cooling Hose: from engine to engine cooler

• Fitting Position: Cylinder Head, transmission sided
• Material: Plastic
• Heating/Cooling: with thermal switch connector
• Supplementary Article/Info 2: with seal ring
• Fabrication Number: CTM-VW-016

• Weight [kg]: 0.033
• for OE number: 1J0 122 291 B
• Supplementary Article/Supplementary Info: with quick coupling
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Supplementary Info: with seal
• Fitting Position: Front, Longitudinal
• Material: Plastic
• General Information: pipe union
• Manufacturer: VIKA

• Weight [kg]: 0.033
• Supplementary Article/Supplementary Info: with quick coupling
• for OE number: 1J0 122 291 B
• Name: SW 30 93 8313
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Lower
• Fabrication Number: CTM-VW-022
• Manufacturer: NTY

• Weight [kg]: 0.033
• Required quantity: 1
• General Information: pipe union
• Manufacturer: VIKA

• Material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Supplementary Info: with seal
• Number of inlets/outlets: 2
• for OE number: 3B0 122 291B
• Consult accessories list for recommended additional repairs:
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Lower
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: MAX

• Weight [kg]: 0.14
• Supplementary Article/Info 2: without thermostat
• Manufacturer: METALCAUCHO
• Additional information: FE03598
• Lisainfo: FE03598

• Material: Plastic
• Fitting Position: Front

• Fitting Position: Cylinder Head
• Thickness [mm]: 5
• Width [mm]: 56
• Length [mm]: 56
• Name: Tihend,jahutusvededelikuflants
• Manufacturer: AJU

• Fitting Position: Radiator, Upper
• for OE number: 1J0121619
• Manufacturer: NRF

• Fitting Position: Lower
• Weight [kg]: 0.082
• Required quantity: 1
• General Information: pipe union
• Manufacturer: VIKA

• Material: Plastic
• Fitting Position: Left
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: MAX

• Fitting Position: Left
• Supplementary Article/Supplementary Info: with seal
• Material: Plastic
• Manufacturer: ZZVF

• Fitting Position: Lower
• Manufacturer: JP GROUP
• Lisainfo: Quick coupling piece
• Additional information: Quick coupling piece

• Fitting Position: Upper
• for OE number: 1J0122291B
• Manufacturer: NRF

• Colour: black
• Fitting Position: Lower
• Weight [kg]: 0.082
• Supplementary Article/Supplementary Info: with quick coupling
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• General Information: pipe union
• Manufacturer: VIKA

• for OE number: 1J0121100
• Fitting Position: Lower
• Supplementary Article/Supplementary Info: without gasket/seal
• Weight [g]: 85
• Supplementary Article/Info 2: without thermostat
• Name: IM 90361
• Manufacturer: ORIGINAL IMPERIUM

• Colour: black
• Fitting Position: Lower
• Supplementary Article/Supplementary Info: with quick coupling
• Manufacturer: SWAG
• Name: SW 30 94 6154

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 038121121D
• Colour: black
• Material: Plastic
• Supplementary Article/Supplementary Info: with seal
• Weight [g]: 76
• Supplementary Article/Info 2: without thermostat
• Name: Jahutusvedeliku flants
• Manufacturer: IMP

• Fitting Position: Front
• Cooling Hose: from engine to engine cooler
• Manufacturer: NRF

• for OE number: 1J0121087C
• Material: Plastic
• Supplementary Article/Supplementary Info: without gasket/seal
• Weight [g]: 49
• Supplementary Article/Info 2: without thermostat
• Name: Jahutusvedeliku flants
• Manufacturer: IMP

• for OE number: 3B0122291B
• Supplementary Article/Supplementary Info: with seal
• Weight [g]: 29
• Supplementary Article/Info 2: without thermostat
• Name: IM 90582
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Upper
• for OE number: 1J0121087A
• Manufacturer: NRF

• Diameter 1 [mm]: 32
• Diameter 2 [mm]: 25
• Diameter 3 [mm]: 16
• Manufacturer: MEAT&DORIA

• Material: Plastic
• Weight [kg]: 0.045
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 6A121133D
• Material: Plastic
• Supplementary Article/Supplementary Info: with seal, without gasket/seal
• Weight [g]: 126
• Supplementary Article/Info 2: without thermostat
• Name: IM 90302
• Manufacturer: ORIGINAL IMPERIUM

• Engine Code: AZH
• Vehicle Equipment: for vehicles without air conditioning
• Weight [kg]: 0.046
• for OE number: 1J0 121 087 C
• Name: SW 30 10 7181
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Upper
• Weight [kg]: 0.09
• Colour: black
• Weight [g]: 90
• Manufacturer: METALCAUCHO
• Additional information: FE03604
• Lisainfo: FE03604

• General Information: pipe union
• Manufacturer: VIKA

• Material: Plastic
• Fitting Position: Left, Cylinder Head
• Weight [kg]: 0.12
• Supplementary Article/Supplementary Info: with seal
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Cylinder Head, transmission sided
• Cooling Hose: from engine to engine cooler
• for OE number: 06A121132
• Manufacturer: NRF

• Cooling Hose: Connection Line
• Manufacturer: VERNET

• Housing Type: Synthetic Material Housing
• Supplementary Article/Supplementary Info: without gasket/seal
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: VER

• Material: Plastic
• Fitting Position: Left, Cylinder Head
• Weight [kg]: 0.12
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: SWAG
• Name: SW 30 92 9791

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Upper
• Weight [kg]: 0.051
• Supplementary Article/Supplementary Info: with quick coupling
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 142
• Height [mm]: 70
• Width [mm]: 30
• Weight [kg]: 0.079
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Cylinder Head, Flywheel side
• Cooling Hose: from engine to engine cooler, Heater Hose
• Manufacturer: VERNET

• Length [mm]: 59.2
• Inner Diameter [mm]: 29
• Weight [kg]: 0.025
• Supplementary Article/Supplementary Info: with quick coupling
• for OE number: 3B0 122 291 B
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 59.2
• Inner Diameter [mm]: 29
• Weight [kg]: 0.025
• Supplementary Article/Supplementary Info: with quick coupling
• for OE number: 3B0 122 291 B
• Name: SW 30 10 3334
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Supplementary Info: with seal
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: MEY

• Opening Temperature [°C]: 105
• Weight [kg]: 0.2
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 1
• Weight [g]: 200
• Supplementary Article/Info 2: with thermostat
• Number of sensors: 1
• Manufacturer: METALCAUCHO

• Diameter 1 [mm]: 32
• Diameter 2 [mm]: 16
• Diameter 3 [mm]: 32
• Diameter 4 [mm]: 8
• Lisainfo: 93131 NIS
• Additional information: 93131 NIS

• Fitting Position: Radiator, Upper
• for OE number: 1J0121619A