Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Shape: round
- Fitting Position: both sides
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Engine Code: AJM
- Fitting Position: Rear Axle
- Outer Diameter [mm]: 60
- Inner Diameter [mm]: 45
- Thickness [mm]: 8
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Vehicle Identification Number (VIN) from: 1J-
3- 000001 - Fitting Position: Left
-
Transmission Type: 5-
Speed Manual Transmission - Inner Diameter [mm]: 48
- Outer Diameter [mm]: 62
- Height [mm]: 7
-
Material: ACM
(Polyacrylate) - Dust Cover: with dust lip
- Swirl Type: Alternating Twist
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 60
- Height [mm]: 12
- Fitting Position: Drive Axle
-
Material: NBR
(nitrile butadiene rubber) - Dust Cover: with dust lip
- Swirl Type: Alternating Twist
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 45
- Outer Diameter [mm]: 60
- Height [mm]: 8
-
Material: ACM
(Polyacrylate) - Dust Cover: with dust lip
- Swirl Type: Alternating Twist
-
Name: Volli rongastihend,
diferentsiaal - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: in transmission housing
- General Information: radial shaft seal
- Manufacturer: VIKA
- Fitting Position: Front Axle
-
Transmission Code: GQA,
GYD, HAH, HYB -
Transmission Type: 6-
Speed Dual- Clutch Transmission - Material: Steel
-
Thread Size: M10x1,
0 - Length [mm]: 13
- Screw length below head [mm]: 10
- Bolt Head-/Nut Design: Hexagon Socket
- Spanner Size: 5
- Supplementary Article/Info 2: with seal ring
- Seal Material: Copper
- Manufacturer: METZGER
- Thickness [mm]: 8
- Inner Diameter [mm]: 45
- Outer Diameter [mm]: 60
-
Material: ACM
(Polyacrylate) - Fitting Position: both sides
- Weight [kg]: 0.002
-
Name: VOLLI RONGASTIHEND,
MANUAALK.KASTI FLANTS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Left
-
Transmission Type: 6-
Speed Manual Transmission - Inner Diameter [mm]: 60
- Outer Diameter [mm]: 74.3
- Height [mm]: 8
-
Material: ACM
(Polyacrylate) - Dust Cover: with dust lip
- Swirl Type: Alternating Twist
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Centre
- General Information: Oil seal for transmission
- Manufacturer: BORSEHUNG
- Shape: O Shape
-
Material: NBR
(nitrile butadiene rubber) - Inner Diameter [mm]: 45
- Thickness [mm]: 6
-
Fitting Position: Rear Axle,
Front Axle - Sealing Ring Diameter [mm]: 60
- Outer Diameter [mm]: 40
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- General Information: tapered ring; small
- Manufacturer: VIKA
-
Fitting Position: Front Axle,
Outlet, Left - Height 1 [mm]: 8
- Outer Diameter 1 [mm]: 74
- Inner Diameter 1 [mm]: 60
-
Material: ACM
(Polyacrylate) - Swirl Type: Alternating Twist
- Dust Cover: with dust lip
-
Name: VOLLI RONGASTIHEND,
DIFERENTSIAAL - Manufacturer: COT
-
Fitting Position: Left,
front propshaft at differential -
Transmission Type: 6-
Speed Manual Transmission - Thickness [mm]: 8
- Inner Diameter [mm]: 60
- Outer Diameter [mm]: 74
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: frontal sided
- Inner Diameter [mm]: 51
- Outer Diameter [mm]: 65
- Thickness [mm]: 7
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Transmission Type: 6-
Speed Manual Transmission - Fitting Position: Front Axle
- Inner Diameter [mm]: 60
- Outer Diameter [mm]: 74
- Height [mm]: 8
-
Radial Shaft Seal Design: A/
BS - Swirl Type: Alternating Twist
-
Material: ACM
(Polyacrylate) - Dust Cover: with dust lip
-
Name: Volli rongastihend,
Kigukast - Manufacturer: ELR
- General Information: taper roller bearing
- Manufacturer: VIKA
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks