• Material: Plastic
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Vehicle Identification Number (VIN) to: 1J-1-900 000
• Thickness [mm]: 3.5
• Inner Diameter [mm]: 19.5
• Material: NBR (nitrile butadiene rubber)
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Manufacturer: JP GROUP
• Lisainfo: Quick coupling piece
• Additional information: Quick coupling piece

• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Quantity: 1
• Material: Plastic
• Weight [kg]: 0.015
• Required quantity: 1
• General Information: retaining spring
• Manufacturer: VIKA

• Vehicle Identification Number (VIN) to: 1J-1-900 000
• Thickness [mm]: 3.5
• Inner Diameter [mm]: 19.5
• Material: NBR (nitrile butadiene rubber)
• Weight [kg]: 0.003
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Equipment: for vehicles with Tiptronic
• Material: NBR (nitrile butadiene rubber)
• Fitting Position: engine sided
• Seal Diameter [mm]: 36
• Thickness [mm]: 3.15
• Surface: nubby
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Material: Rubber
• Weight [kg]: 0.003
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: engine sided
• Seal Diameter [mm]: 50
• Thickness [mm]: 3.15
• Shape: O Shape
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• Width [mm]: 32
• Thickness [mm]: 1.98
• Material: Steel
• Weight [kg]: 0.001
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Material: Plastic
• Weight [kg]: 0.015
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: engine sided
• Seal Diameter [mm]: 50
• Thickness [mm]: 3.15
• Shape: O Shape
• Surface: nubby
• Manufacturer: TOPRAN

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Cylinder Head
• Inner Diameter [mm]: 50
• Outer Diameter [mm]: 56.3
• Thickness [mm]: 3.15
• Shape: O-Ring
• Manufacturer: ELRING

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• Number of flange connections: 3
• Manufacturer: DELLO AUTOMEGA

• Vehicle Equipment: for vehicles with Tiptronic
• Material: Plastic
• Supplementary Article/Info 2: with seal ring
• Fitting Position: Cylinder Head, transmission sided
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) to: 1J-X-800 000
• Transmission Type: Automatic Transmission
• Vehicle Equipment: for vehicles with air conditioning
• Manufacturer: DELLO AUTOMEGA

• Transmission Type: Automatic Transmission
• Number of flange connections: 4
• Manufacturer: DELLO AUTOMEGA

• Housing material: Plastic
• Number of inlets/outlets: 1
• for OE number: 1J0122291
• Manufacturer: DELLO AUTOMEGA

• Transmission Type: Automatic Transmission
• Vehicle Equipment: for vehicles with air conditioning
• Vehicle Identification Number (VIN) to: 1J-X-800000
• Number of inlets/outlets: 4
• Material: GRP (Glass fibre Reinforced Plastic)
• Heating/Cooling: with thermal switch connector
• for OE number: 1J0 121 087A
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Type: Manual Transmission
• Number of inlets/outlets: 3
• Material: GRP (Glass fibre Reinforced Plastic)
• for pipe diameter [mm]: 32, 8
• for OE number: 1J0 121 087B
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 1J0 121 087A
• Material: GRP (Glass fibre Reinforced Plastic)
• Heating/Cooling: with thermal switch connector
• Fabrication Number: CTM-VW-019
• Manufacturer: NTY

• for OE number: 1J0 122 291D
• Material: Plastic
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: DELLO AUTOMEGA

• Engine Code: AUY
• Thickness [mm]: 3.15
• Inner Diameter [mm]: 36
• Material: Rubber
• Weight [kg]: 0.003
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 1J0 121 087B
• Material: GRP (Glass fibre Reinforced Plastic)
• Fabrication Number: CTM-VW-018

• Forward- /Backflow: for foreflow
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Supplementary Info: with seal
• Number of inlets/outlets: 2
• for OE number: 1J0 122 291D
• Consult accessories list for recommended additional repairs:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Supplementary Info: with seal
• Number of inlets/outlets: 2
• for OE number: 1J0 122 291
• Consult accessories list for recommended additional repairs:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Type: Automatic Transmission
• Vehicle Identification Number (VIN) to: 1J-X-800000
• Supplementary Article/Supplementary Info: without gasket/seal
• Vehicle Equipment: for vehicles with air conditioning
• Weight [kg]: 0.054
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 1J0121087B
• Supplementary Article/Supplementary Info: with seal
• Weight [g]: 45
• Supplementary Article/Info 2: without thermostat
• Name: IM 90305
• Manufacturer: ORIGINAL IMPERIUM

• for OE number: 1J0121087A
• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Weight [g]: 63
• Supplementary Article/Info 2: without thermostat
• Name: IM 90306
• Manufacturer: ORIGINAL IMPERIUM

• for OE number: 1J0122291D
• Manufacturer: NRF

• Cooling Hose: from engine to engine cooler
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Material: GRP (Glass fibre Reinforced Plastic)
• Number of inlets/outlets: 4
• General Information: distributor
• Manufacturer: VIKA

• Vehicle Equipment: for vehicles without Tiptronic
• Fitting Position: Radiator, Lower
• Material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Supplementary Info: with seal
• Number of inlets/outlets: 2
• Supplementary Article/Info 2: with bracket, with breather valve
• for OE number: 6Q0 122 291F
• Consult accessories list for recommended additional repairs:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Material: Plastic
• Manufacturer: DELLO AUTOMEGA

• for OE number: 1J0122291D
• Supplementary Article/Supplementary Info: with seal
• Weight [g]: 31
• Supplementary Article/Info 2: without thermostat
• Name: IM 90569
• Manufacturer: ORIGINAL IMPERIUM

• Supplementary Article/Supplementary Info: with seal
• Material: Plastic
• Fitting Position: Front
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Material: GRP (Glass fibre Reinforced Plastic)
• Number of inlets/outlets: 3
• General Information: distributor
• Manufacturer: VIKA

• for OE number: 1J0 122 291
• Weight [kg]: 0.05
• Fitting Position: Radiator
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Lower
• Fabrication Number: CTM-VW-022
• Manufacturer: NTY

• Fitting Position: Cylinder Head, transmission sided
• Material: Plastic
• Heating/Cooling: with thermal switch connector
• Supplementary Article/Info 2: with seal ring
• Fabrication Number: CTM-VW-020
• Manufacturer: NTY

• Number of flange connections: 2
• Manufacturer: DELLO AUTOMEGA

• Housing material: Plastic
• Colour: black
• Number of inlets/outlets: 3
• Supplementary Article/Supplementary Info: with seal
• for OE number: 038121132C
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Cylinder Head
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Fitting Position: Radiator, Upper
• for OE number: 1J0121619
• Manufacturer: NRF

• Engine Code: AUY
• Vehicle Equipment: for vehicles with Tiptronic
• Number of connectors: 2
• Material: Plastic
• Weight [kg]: 0.057
• for OE number: 044 121 144 B
• Fitting Position: Cylinder Head
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: 1J-X-800 000
• Material: GRP (Glass fibre Reinforced Plastic)
• Heating/Cooling: with thermal switch connector
• Number of inlets/outlets: 4
• General Information: distributor
• Manufacturer: VIKA

• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 20
• Weight [kg]: 0.03
• for OE number: 1J0 122 291 D
• Name: SW 30 94 5980
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Manual Transmission
• Weight [kg]: 0.047
• for OE number: 1J0 121 087 B
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Material: Plastic
• Fitting Position: Cylinder Head, transmission sided
• Supplementary Article/Info 2: with seal ring
• Heating/Cooling: with thermal switch connector
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: AUY
• Material: Plastic
• Weight [kg]: 0.065
• for OE number: 037 121 121 A
• Manufacturer: FEBI BILSTEIN

Vehicle Identification Number (VIN) to: 1J-2B123 078, 1J-2D352 773, 1J-2P394 000, 1J-2U403 276, 1J-2W592 782 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front
• Supplementary Article/Supplementary Info: with seal

• Weight [kg]: 0.165
• Supplementary Article/Supplementary Info: with seal
• Supplementary Article/Info 2: without thermostat
• Manufacturer: METALCAUCHO

• Fitting Position: Left
• Supplementary Article/Supplementary Info: with seal
• Material: Plastic
• Manufacturer: ZZVF

• for OE number: 1J0 122 291 D
• Weight [kg]: 0.03
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: Automatic Transmission
• Vehicle Equipment: for vehicles with Tiptronic
• Fitting Position: Radiator, Lower
• Material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Supplementary Info: with seal
• Number of inlets/outlets: 2
• for OE number: 1J0 122 291G
• Consult accessories list for recommended additional repairs:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front
• Material: Plastic
• Supplementary Article/Supplementary Info: without gasket/seal
• Weight [g]: 78
• Supplementary Article/Info 2: without thermostat
• Name: IM 90000
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Lower
• Manufacturer: JP GROUP
• Lisainfo: Quick coupling piece
• Additional information: Quick coupling piece

• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 20
• Weight [kg]: 0.031
• for OE number: 1J0 122 291 D
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: AUY
• Vehicle Equipment: for vehicles with Tiptronic
• Number of connectors: 2
• Material: Plastic
• Weight [kg]: 0.057
• Supplementary Article/Supplementary Info: with seal
• Fitting Position: Cylinder Head
• for OE number: 044 121 144 B
• Name: SW 32 92 3914
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Manual Transmission
• Weight [kg]: 0.047
• for OE number: 1J0 121 087 B
• Name: SW 33 10 3756
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity: 1
• Weight [kg]: 0.064
• General Information: pipe union
• Manufacturer: VIKA

• Fitting Position: Behind the radiator, Upper
• for OE number: 1J0121087B
• Manufacturer: NRF

• Colour: black
• Fitting Position: Lower
• Weight [kg]: 0.082
• Supplementary Article/Supplementary Info: with quick coupling
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 1J0121100
• Fitting Position: Lower
• Supplementary Article/Supplementary Info: without gasket/seal
• Weight [g]: 85
• Supplementary Article/Info 2: without thermostat
• Name: IM 90361
• Manufacturer: ORIGINAL IMPERIUM

• Vehicle Equipment: for vehicles with Tiptronic
• Fitting Position: Lower Left
• Weight [kg]: 0.064
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 038121121D
• Colour: black
• Material: Plastic
• Supplementary Article/Supplementary Info: with seal
• Weight [g]: 76
• Supplementary Article/Info 2: without thermostat
• Name: IM 90227
• Manufacturer: ORIGINAL IMPERIUM

• Colour: black
• Fitting Position: Lower
• Supplementary Article/Supplementary Info: with quick coupling
• Manufacturer: SWAG
• Name: SW 30 94 6154

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 1J0121087C
• Material: Plastic
• Supplementary Article/Supplementary Info: without gasket/seal
• Weight [g]: 49
• Supplementary Article/Info 2: without thermostat
• Name: IM 90308
• Manufacturer: ORIGINAL IMPERIUM

• for OE number: 3B0122291B
• Supplementary Article/Supplementary Info: with seal
• Weight [g]: 29
• Supplementary Article/Info 2: without thermostat
• Name: IM 90582
• Manufacturer: ORIGINAL IMPERIUM

• Vehicle Equipment: for vehicles with Tiptronic
• Fitting Position: Lower Left
• Weight [kg]: 0.064
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front
• Cooling Hose: from engine to engine cooler
• Manufacturer: NRF

• Engine Code: AUY
• Transmission Type: Automatic Transmission
• Weight [kg]: 0.046
• for OE number: 1J0 121 087 C
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 1J0121087
• Colour: black
• Material: Plastic
• Supplementary Article/Supplementary Info: without gasket/seal
• Weight [g]: 49
• Supplementary Article/Info 2: without thermostat
• Name: IM 90190
• Manufacturer: ORIGINAL IMPERIUM

• Vehicle Equipment: for vehicles with manual transmission
• Material: Plastic
• Weight [kg]: 0.045
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Behind the radiator, Upper
• Manufacturer: VERNET

• Engine Code: AUY
• Transmission Type: Automatic Transmission
• Weight [kg]: 0.046
• for OE number: 1J0 121 087 C
• Name: SW 30 10 7181
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Automatic Transmission
• Material: Plastic
• Number of connectors: 4
• Manufacturer: METZGER

• Weight [kg]: 0.17
• Required quantity: 1
• General Information: pipe union
• Manufacturer: VIKA

• for OE number: 038121133
• Material: Plastic
• Supplementary Article/Supplementary Info: with seal
• Weight [g]: 163
• Supplementary Article/Info 2: without thermostat
• Name: IM 90004
• Manufacturer: ORIGINAL IMPERIUM