Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Engine Code: BML,
BFH - Fitting Position: Rear Axle
- Number of Teeth, ABS ring: 43
- Inner Diameter [mm]: 61
- Outer Diameter [mm]: 79.5
-
Supplementary Article/Info 2: for wheel bearing/
wheel hub - Width [mm]: 21
- Weight [kg]: 0.039
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle Left,
Front Axle Right -
Fabrication Number: KLP-
VW- 009P - Manufacturer: NTY
-
Name: NTY KLP-
VW- 009P
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle
- General Information: wheel hub; front
- Manufacturer: VIKA
-
Vehicle Identification Number (VIN) from: 1J-
3- 100 001* -
for brake disc diameter [mm]: 280,
256 - Manufacturer Restriction: GEOMET
- for brake disc thickness [mm]: 22
-
for PR number: 1LQ,
1LS, 1ZF, 1ZM, 1ZP -
Fitting Position: Rear Axle,
Front Axle Left, Front Axle Right - Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Front Axle
- Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY
- Number of Teeth: 36
- Fitting Position: Front Axle both sides
- Height [mm]: 74
- Weight [kg]: 1.5
- Drum diameter [mm]: 65
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 126.5
- Number of Holes: 5
- Wheel Hub Diameter [mm]: 57
- Supplementary Article/Info 2: with ABS sensor ring
- Manufacturer: METALCAUCHO
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Supplementary Article/Info 2: without wheel bearing
- Rim Hole Number: 5
-
Lisainfo: Wheel hub for disc brake,
front, 40 mm -
Additional information: Wheel hub for disc brake,
front, 40 mm
-
Engine Code: BML,
BFH - not for PR number: 1LJ
- Fitting Position: Front Axle
- Supplementary Article/Info 2: with ABS sensor ring
- Manufacturer: IJS GROUP
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Rim Hole Number: 5
- Number of Teeth: 36
-
Thread Size: M14X1,
5 - Number of Teeth, ABS ring: 44
- Outer Diameter [mm]: 126.5
- Supplementary Article/Info 2: with ABS sensor ring
- Manufacturer: GSP
- Fitting Position: Front Axle
- Weight [kg]: 1.5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- General Information: wheel hub; front
- Manufacturer: VIKA
- Block Separation:
- Bolt Hole Circle Ø [mm]: 100
- Outer Diameter [mm]: 126
- Rim Hole Number: 5
- Supplementary Article/Info 2: with ABS sensor ring
- Manufacturer: METZGER
Fitting Position: Front Axle Left, Front Axle Right, Rear Axle Left, Rear Axle Right
-
Engine Code: BML,
BFH - not for PR number: 1LJ
- Quantity per axle: 2
- Supplementary Article/Supplementary Info: without attachment material
- Height [mm]: 75
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Rim Hole Number: 5
-
Diameter [mm]: 133,
40 - Fitting Position: Front Axle
- Braking/Drive Dynamics: for vehicles with ABS
- Drive Shaft: with ABS ring
- Weight [kg]: 1.683
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Engine Code: BML,
BFH - Fitting Position: Front Axle
-
not for PR number: 1LJ,
1ZD, 1ZE - Block Separation:
- Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 5
- Weight [kg]: 1.5
- Supplementary Article/Info 2: with ABS sensor ring
- Observe service information:
- Name: SW 32 92 2512
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: BML,
BFH - Fitting Position: Front Axle
-
not for PR number: 1LJ,
1ZD, 1ZE - Block Separation:
- Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 5
- Weight [kg]: 1.5
- Supplementary Article/Info 2: with ABS sensor ring
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: BML,
BFH - Width [mm]: 75
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 127
- Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 5
- Fitting Position: Front Axle
- Weight [kg]: 1.5
-
Supplementary Article/Info 2: with ABS sensor ring,
without wheel bearing - Observe service information:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks