Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 17
- Length from [mm]: 33
- Material: Rubber
Lisainfo: "Tootja: SRL
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 10
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Fitting Position: Front Axle both sides
- Mounting Type: Rubber Mount
- Material: Rubber
- Weight [kg]: 0.04
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle both sides
- Material: Rubber
- Length [mm]: 33
- Inner Diameter [mm]: 17
- Manufacturer: MERTZ
-
Engine Code: AKK,
ANW, AUD, APQ, AKV, AEX - Country Specific Design: South Africa
- Block Separation:
- Length [mm]: 33
- Material: Rubber
- Observe service information:
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 17
-
Name: Paigutus -
Kndmik VW P. GOLF/ POLO WEW - Manufacturer: MAX
- Fitting Position: inner
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 17
- Width [mm]: 33
- SVHC: No SVHC present!
-
Name: Kinnitus,
stabilisaator - Manufacturer: FAG
-
Fitting Position: Front Axle Left,
Front Axle Right, inner - Inner Diameter [mm]: 17
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Fitting Position: Front Axle both sides,
inner - Diameter [mm]: 17
- Weight [kg]: 0.069
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity: 4
- Rod/Strut: Coupling Rod
- Fitting Position: Front Axle
- Weight [kg]: 0.015
- General Information: rubber bush
- Manufacturer: VIKA
-
Fitting Position: Front Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 18
- Inner Diameter [mm]: 16.5
- Length [mm]: 39
- Width [mm]: 32
- Height [mm]: 35
- for OE number: 6X0411313
- Manufacturer: SASIC
- Length [mm]: 33
- Inner Diameter [mm]: 17
- Material: Rubber
- Fitting Position: Front Axle
- Weight [kg]: 0.026
-
Name: Paigutus -
Kndmik VW P. GOLF/ POLO WEW - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 20
- Inner Diameter [mm]: 18.5
- Length [mm]: 32
- Width [mm]: 34
- Height [mm]: 35
- for OE number: 1H0411314
- Manufacturer: SASIC
- Length [mm]: 33
- Inner Diameter [mm]: 17
- Material: Rubber
- Fitting Position: Front Axle
- Weight [kg]: 0.026
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 17
- Inner Diameter [mm]: 15.5
- Length [mm]: 36
- Width [mm]: 28
- Height [mm]: 37
- for OE number: 191411314
- Manufacturer: SASIC
- Fitting Position: Front Axle
- Inner Diameter [mm]: 18
- Required quantity: 2
-
Name: Paigutus -
Kndmik VW P. GOLF/ POLO/ CAD - Manufacturer: TED
-
Fitting Position: inner,
Front Axle Left, Front Axle Right - Inner Diameter [mm]: 17
- Required quantity: 2
-
Name: Paigutus -
Kndmik VW P. GOLF/ POLO WE - Manufacturer: MEY
-
Stabiliser Bar Diameter [mm]: 18,
20 - Block Separation:
- Fitting Position: Front Axle Left
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 17
- Replace in pairs only:
- Shape: slotted
- Quantity per axle: 2
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Front Axle,
inner, Right, Left -
Engine Code: AEX,
AKV, APQ, AKK, ANW -
Vehicle Identification Number (VIN) to: 6K-
Y- 502 794, 6K- Y- 504 288 - Block Separation:
-
Vehicle Identification Number (VIN) from: 6K-
Y- 504 289 - Total Length [mm]: 33
- Inner Diameter [mm]: 17
- Outer Diameter [mm]: 35.5
- Manufacturer: CORTECO
- Fitting Position: Front Axle both sides
- Required quantity: 2
- Inner Diameter [mm]: 17
- paired article number: VKDS 351006
- Manufacturer: SKF
- Fitting Position: Front Axle
- Diameter [mm]: 19
- Inner Diameter 1 [mm]: 19
- Thickness 1 [mm]: 32.5
- Manufacturer: DELPHI
- Fitting Position: Front Axle
- Diameter [mm]: 17
- Inner Diameter 1 [mm]: 17
- Outer Diameter 1 [mm]: 35
- Thickness 1 [mm]: 32
- Manufacturer: DELPHI
- Fitting Position: Axle beam
- General Information: Rubber bush
- Manufacturer: BORSEHUNG
-
Fitting Position: Front Axle Left,
Front Axle Right - Material: Metal
- Manufacturer: 3RG
- Length [mm]: 48
- Width [mm]: 30
- Thickness [mm]: 30
- Inner Diameter [mm]: 16.2
- Material: Rubber
- Fitting Position: Rear Axle
- Weight [kg]: 0.037
-
Name: Kinnitus,
stabilisaator - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Manufacturer: MAGNETI MARELLI
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks