Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Rear
- Material: Metal
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Upper - Mounting Type: Rubber Mount
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Lower - Mounting Type: Rubber Mount
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Engine Code: AEX,
AKV, APQ -
Fitting Position: Front Axle Left,
Front Axle Right - Bearing Type: Angular Ball Bearing
-
Manufacturer: JP-
GROUP -
Lisainfo: Ball bearing for strut bearing,
upper -
Additional information: Ball bearing for strut bearing,
upper
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Fitting Position: Front Axle Left,
Front Axle Right - Supplementary Article/Info 2: with ball bearing
- Manufacturer: JP GROUP
-
Lisainfo: Bearing for strut with bearing,
front -
Additional information: Bearing for strut with bearing,
front
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: JP GROUP
- Lisainfo: Repair kit for strut mount
- Additional information: Repair kit for strut mount
-
Engine Code: AKK,
ANW, AUD -
Fitting Position: Front Axle Left,
Front Axle Right - Bearing Type: Ball Bearing
- Manufacturer: JP GROUP
- Lisainfo: Ball bearing for strut bearing
- Additional information: Ball bearing for strut bearing
- Fitting Position: Rear Axle both sides
- Height [mm]: 4.1
- Inner Diameter [mm]: 11.1
- Outer Diameter [mm]: 20
-
Name: TUGIRONGAS,
AMORDI TUGILAAGER - Manufacturer: MAX
- Fitting Position: Rear Axle both sides
- Height [mm]: 4.1
- Inner Diameter [mm]: 11.1
- Outer Diameter [mm]: 20
-
Name: TUGIRONGAS,
AMORDI TUGILAAGER - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Rear Axle both sides,
Lower - Mounting Type: Rubber Mount
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Rear Axle
-
Fabrication Number: AD-
VW- 021 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Vehicle Identification Number (VIN) to: 6K-
Y- 504 288 -
Vehicle Identification Number (VIN) from: 6K-
Y- 504 289 -
Fitting Position: Rear Axle Left,
Rear Axle Right - Manufacturer: DELLO AUTOMEGA
-
Fitting Position: Rear Axle both sides,
Upper - Mounting Type: Rubber Mount
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Rear Axle
-
Name: Laager -
Kndmik. VW T. GOLF/ - Manufacturer: MAX
- Fitting Position: Rear Axle
-
Name: Laager -
Kndmik. VW T. GOLF/ - Manufacturer: MAX
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle,
Upper - Weight [kg]: 0.012
- Supplementary Article/Info 2: without ball bearing
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle,
Lower - Weight [kg]: 0.011
- Supplementary Article/Info 2: without ball bearing
- Manufacturer: SWAG
- Name: SW 30 54 0021
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fabrication Number: AD-
VW- 010 -
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Vehicle Identification Number (VIN) to: 6K-
Y- 502794 - Inner Diameter [mm]: 14
- Outer Diameter [mm]: 45
- Height [mm]: 13.5
-
Fitting Position: Front Axle Left,
Front Axle Right -
Name: Laager -
Kndmik VW GOLF/ PASSAT 91- - Manufacturer: MAX
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle,
Lower - Weight [kg]: 0.011
- Supplementary Article/Info 2: without ball bearing
-
Name: Laager -
Kndmik. VW T. GOLF DOLNA - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 45
- Height [mm]: 14
- Manufacturer: DELLO AUTOMEGA
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle,
Upper - Weight [kg]: 0.012
- Supplementary Article/Info 2: without ball bearing
-
Name: Laager -
Kndmik. VW T. GOLF GàRNA - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Supplementary Article/Info 2: without bearing
- Quantity Unit: Piece
- Required quantity: 2
- replacement in pairs recommended:
-
Name: Laager -
Kndmik. VW T. GOLF/ GàRNA - Manufacturer: MEY
- Fitting Position: Front Axle
- for OE number: 1J0412249
- Manufacturer: SASIC
- Material: Rubber
-
Fitting Position: Upper,
Rear Axle both sides - Supplementary Article/Info 2: without bearing
- Name: Suspension strut support bearing left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
SEAT/VW
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
SEAT/VW
(kvaliteediklass: PJ)"
- Fitting Position: Front Axle
- Height [mm]: 13.5
- Weight [kg]: 0.08
- Inner Diameter [mm]: 14.5
- Outer Diameter [mm]: 45.5
- Manufacturer: METALCAUCHO
- Required quantity: 2
- Inner Diameter [mm]: 14
- Fitting Position: Front Axle
- Manufacturer: TEDGUM
- Name: TG 00722859
-
Material: Rubber/
Metal -
Fitting Position: Lower,
Rear Axle both sides - Supplementary Article/Info 2: without bearing
- Name: Suspension strut support bearing left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
VW/ SEAT
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
VW/ SEAT
(kvaliteediklass: PJ)"
- Fitting Position: Rear Axle
- Supplementary Article/Info 2: without bearing
- Required quantity: 2
- replacement in pairs recommended:
-
Name: Laager -
Kndmik. VW T. GOLF2/ 3/ DOLNA - Manufacturer: MEY
-
Fitting Position: Front Axle Left,
Front Axle Right - for OE number: 7201592
- Manufacturer: GSP
- Construction Year to: 08.1999
- Fitting Position: Front Axle both sides
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 45
- Thickness [mm]: 13.5
-
for OE number: 1J0 412 249,
450 330 00 51 - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Engine Code: AKK,
AUD, ANW, APQ, AEX, AKV -
Fitting Position: Rear Axle,
Rear Axle Left, Rear Axle Right, Lower - Weight [kg]: 0.01
- Required quantity: 2
- Supplementary Article/Info 2: without ball bearing
- Manufacturer: CORTECO
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Fitting Position: Front Axle Right,
Front Axle Left - Manufacturer: 3RG
-
Vehicle Identification Number (VIN) to: 6K-
X- 610000 - Fitting Position: Front Axle
- Height [mm]: 14
- Outer Diameter [mm]: 45
- Inner Diameter 1 [mm]: 14
- Manufacturer: OPTIMAL ZAWIESZENIE
- Fitting Position: Front Axle Left
- Weight [g]: 65
- Bearing manufacturer: IMPERGOM
- Thickness [mm]: 13.5
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 45
-
Name: IM 32295/
1 - Manufacturer: ORIGINAL IMPERIUM
-
Engine Code: APQ,
AKV, AEX - Width [mm]: 13.5
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 45
- Material: Plastic
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.08
-
Name: Laager -
Kndmik VW GOLF/ PASSAT 91- - Manufacturer: FEB
- Additional information: FE01111
- Lisainfo: FE01111
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Manufacturer: DENCKERMANN AMORTYZATORY
-
Fitting Position: Right,
Left, Rear Axle - Width 1 [mm]: 27
- Width 2 [mm]: 38
- Outer Diameter 2 [mm]: 68
- Outer Diameter 1 [mm]: 58
- Manufacturer: SNR
- Name: SN KB957.00
- Additional information: KB957.00 SNR
- Lisainfo: KB957.00 SNR
- Quantity: 2
- Fitting Position: Front Axle
- Material: Plastic
- Bearing Type: Angular Ball Bearing
- Width [mm]: 13.5
- Weight [kg]: 0.08
- Required quantity: 2
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 45
-
Quality/ Grade: 12,
P6 - General Information: deep groove ball thrust bearing; front
- Manufacturer: VIKA
- Model Year from: 1996
- Model Year to: 2000
- Fitting Position: Front Axle
- Weight [kg]: 0.065
- Packaging length [cm]: 4.5
- Packaging width [cm]: 4.5
- Packaging height [cm]: 1.4
- Manufacturer: FEBEST
-
Vehicle Identification Number (VIN) to: 6K-
Y- 502 794 -
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
-
Name: Laager -
Kndmik VW GOLF/ PASSAT 91- - Manufacturer: LMI
for OE number: 1J0 412 249, 357 412 249, 357 412 249 A, 450 330 00 51, 7201848, 95VW-3K031-AA, A 450 330 00 51 SVHC: No information available, please contact the manufacturer!
-
Engine Code: APQ,
AKV, AEX - Width [mm]: 13.5
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 45
- Material: Plastic
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.08
- Name: SW 30 54 0001
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 12.2000
- Fitting Position: Front Axle
- Supplementary Article/Info 2: without bearing
- Lisainfo: Top strut mounting without bearing
- Additional information: Top strut mounting without bearing
- Vehicle Identification Number (VIN) to: 6K...X...610000
-
Fitting Position: Front Axle Left,
Front Axle Right - Supplementary Article/Info 2: without bearing
- Manufacturer: DELLO AUTOMEGA
- Additional information: 110027910 DELLO
- Lisainfo: 110027910 DELLO
- Vehicle Identification Number (VIN) from: 6K...X...610001
- Fitting Position: Front Axle
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 814007110
- for OE number: 1J0512149B
- Fitting Position: Rear Axle
- Weight [g]: 104
- Name: IM 37242
- Manufacturer: ORIGINAL IMPERIUM
- for OE number: 191512335
- Fitting Position: Rear Axle
- Weight [g]: 151
- Name: IM 32317
- Manufacturer: ORIGINAL IMPERIUM
-
Vehicle Identification Number (VIN) to: 6K-
Y- 502 794 - Fitting Position: Front Axle
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 45
- Height [mm]: 13.5
- Bearing Type: Rolling Bearing
-
Name: Laager -
Kndmik VW GOLF/ PASSAT 91- - Manufacturer: MEY
- Fitting Position: Front Axle
-
Vehicle Identification Number (VIN) to: 6K-
Y- 504288 - SVHC: No SVHC present!
-
Name: Laager,
amorditugilaager - Manufacturer: FAG
- Fitting Position: Rear Axle
-
Technical Information: bushing
(x2) - Manufacturer: KYB
- Additional information: KYBSM9700
- Lisainfo: KYBSM9700
Name: Laager - Kndmik. SEAT T. CORDOBA, IBIZA II, III, TOLEDO/ SKODA FAVORIT, FELICIA I, II, FORMAN/ VW CORRADO, GOLF II, III, IV, JETTA I, II,
-
Engine Code: AEX,
AKV, APQ - Fitting Position: Front Axle
- Bearing Type: Angular Ball Bearing
-
Material: Plastic,
Metal - Quantity per axle: 2
-
Alternative Repair Kit: 6490035,
6490247 - Manufacturer: METZGER
- Fitting Position: Rear Axle
- Weight [kg]: 0.2
- Supplementary Article/Info 2: without bearing
- Warranty: 5 years warranty
- Packaging length [cm]: 13.6
- Packaging width [cm]: 11.8
- Packaging height [cm]: 11.4
- Manufacturer: MONROE
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: JP GROUP
-
Lisainfo: Bearing for strut without bearing,
front -
Additional information: Bearing for strut without bearing,
front
- Construction Year to: 08.1999
-
Fitting Position: Front Axle Left,
Front Axle Right, Upper -
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 2
- Alternative Repair Kit: 108 557
- Consult accessories list for recommended additional repairs:
- Supplementary Article/Info 2: without rolling bearing
-
for OE number: 357 412 331A,
7 201 848 - Replace in pairs only:
- Manufacturer: TOPRAN
- Lisainfo: 103 491 HP
- Additional information: 103 491 HP
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle
- Vehicle Identification Number (VIN) to: 6K...X...610000
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 814007510
- Construction Year to: 09.1999
- Fitting Position: Front Axle
- Quantity per axle: 2
- Manufacturer: SKF
- Name: SK VKD35110
-
Fitting Position: Front Axle,
Front Axle Left, Front Axle Right - Supplementary Article/Info 2: with bearing
-
Fabrication Number: AD-
VW- 014 - Manufacturer: NTY
-
Name: NTY AD-
VW- 014
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Engine Code: AEX,
AKV, APQ - Fitting Position: Front Axle both sides
- Outer Diameter [mm]: 45
- Inner Diameter [mm]: 14
- Material: Plastic
- for OE number: 1J0 412 249
- Name: Top mount left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
VW POLO/SEAT INCA
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
VW POLO/SEAT INCA
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle Left,
Front Axle Right - Bearing Type: Rolling Bearing
- Outer Diameter [mm]: 111
-
Fabrication Number: AD-
VW- 002 - Manufacturer: NTY
-
Name: NTY AD-
VW- 002
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Material: Metal,
Plastic - Outer Diameter [mm]: 112
-
Fabrication Number: AD-
VW- 011 -
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Suspension: for vehicles with sports suspension
-
Fitting Position: Right,
Left, Front Axle - Outer Diameter 1 [mm]: 45
- Width 1 [mm]: 13
- Inner Diameter 1 [mm]: 14
-
Manufacturer: SNR /
NTN- SNR/ - Name: SN M254.01
Vehicle Identification Number (VIN): [5J-93120 133;], [;5J-95032 164], [5J-9A508 237;], [5J-9B505 016;], [;5J-9B601 131], [5J-9K506 834;]
-
Vehicle Identification Number (VIN) to: 6K-
Y- 502 794 -
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
-
Name: Laager -
Kndmik VW P. GOLF 91- PASSAT - Manufacturer: SAA
for OE number: 1J0 412 249, 357 412 249, 357 412 249 A, 450 330 00 51, 7201848, 95VW-3K031-AA, A 450 330 00 51 SVHC: No information available, please contact the manufacturer!
-
Vehicle Identification Number (VIN) to: 6K-
Y- 502794 - Fitting Position: Front Axle
- Supplementary Article/Info 2: without bearing
-
Name: Laager -
Kndmik. VW P. GOLF 3/ P - Manufacturer: MAX
-
Engine Code: APQ,
AEX, AKV -
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.3
- Required quantity: 2
- Alternative Repair Kit: 21652902
- Supplementary Article/Info 2: without ball bearing
- Manufacturer: CORTECO
- Name: COC 21652281
- Fitting Position: Rear Axle
- SVHC: No SVHC present!
-
Name: Remondikomplekt,
vedruamordi tugilaager - Manufacturer: FAG
-
Engine Code: APQ,
AKV, AEX -
Material: Rubber/
Metal - Fitting Position: Front Axle
- Weight [kg]: 0.322
- Supplementary Article/Info 2: without ball bearing
-
Name: Laager -
Kndmik. VW P. GOLF 3/ P - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Supplementary Article/Info 2: without bearing
- Quantity Unit: Piece
- Required quantity: 2
- replacement in pairs recommended:
-
Name: Laager -
Kndmik. VW P. GOLF 3/ P - Manufacturer: MEY
General Information: MEYLE recomments to use the reinforced version (HD)
-
Vehicle Identification Number (VIN) to: 6K-
Y- 502 794 -
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: JP GROUP
-
Lisainfo: Bearing for strut with bearing,
front -
Additional information: Bearing for strut with bearing,
front
-
Engine Code: AKK,
ANW, AUD -
Material: Metal,
Plastic - Bearing Type: Rolling Bearing
- Observe service information:
-
Fitting Position: Front Axle Left,
Front Axle Right - Outer Diameter [mm]: 111
- Inner Diameter [mm]: 68
-
Name: Laager -
Kndmik VW - Manufacturer: MAX
-
Lisainfo: 6N0412249C/
MG -
Additional information: 6N0412249C/
MG
- Fitting Position: Rear Axle
- Manufacturer: JAPKO
-
Fitting Position: Front Axle,
Front Axle both sides - Construction Year to: 09.1999
- Supplementary Article/Info 2: without bearing
- Name: Suspension strut support bearing left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
SEAT/VW/FORD
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
SEAT/VW/FORD
(kvaliteediklass: PJ)"
- Fitting Position: Front Axle
-
Vehicle Identification Number (VIN) from: 6K-
Y- 504289 - SVHC: No SVHC present!
-
Name: Laager,
amorditugilaager - Manufacturer: FAG
- Fitting Position: Front Axle
- Manufacturer: JAPKO
-
Engine Code: APQ,
AKV, AEX -
Material: Rubber/
Metal - Fitting Position: Front Axle
- Weight [kg]: 0.322
- Supplementary Article/Info 2: without ball bearing
- Manufacturer: SWAG
- Name: SW 30 54 0008
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 08.1999
- Fitting Position: Front Axle both sides
- Supplementary Article/Info 2: with rolling bearing
- Quantity per axle: 2
- for components see parts list:
- Replace in pairs only:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Vehicle Identification Number (VIN) to: 6K-
Y- 502 794 - Quantity per axle: 2
- Alternative Repair Kit: 802 261
-
Fitting Position: Front Axle Left,
Front Axle Right - Supplementary Article/Info 2: without ball bearing
-
for OE number: 357 412 331 A,
7201848, 7M0 412 331, 95VW- 3K031- AA -
Name: Laager -
Kndmik. VW P. GOLF 2, 0- 2, 8 91- / PASSAT - Manufacturer: SAA
SVHC: No information available, please contact the manufacturer!
- Construction Year from: 10.1999
- Fitting Position: Front Axle
- Outer Diameter [mm]: 45
- Manufacturer: KAMOKA AMORTYZATORY
-
Vehicle Identification Number (VIN) to: 6K-
Y- 502 794 - Quantity per axle: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Supplementary Article/Info 2: without ball bearing
-
for OE number: 357 412 331 A,
7201848, 7M0 412 331, 95VW- 3K031- AA - Alternative Repair Kit: 26642 01
-
Name: Laager -
Kndmik. VW P. GOLF 3/ PASSAT - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front Axle Left,
Front Axle Right - for OE number: 7M0 412 331 A
- Manufacturer: GSP
- Fitting Position: Front Axle
- Vehicle Identification Number (VIN) from: 6K Y 502 795
- Weight [kg]: 0.1
- Packaging length [cm]: 6
- Packaging width [cm]: 4.9
- Packaging height [cm]: 5.1
- Manufacturer: MONROE
-
Fitting Position: Front Axle,
both sides - Quality: OE Performance
- Colour: silver
- Weight [g]: 286
- Manufacturer: GATES PASKI PRZEWODY
-
Engine Code: APQ,
AKV, AEX - Diameter [mm]: 97
- Quantity Unit: Set
- Fitting Position: Front Axle
- Height [mm]: 52
- Weight [kg]: 0.445
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Height [mm]: 24
- Weight [kg]: 0.28
- Outer Diameter [mm]: 112
- Supplementary Article/Info 2: without ball bearing
- Fitting Position: Front Axle
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Engine Code: APQ,
AKV, AEX - Thickness [mm]: 50
- Inner Diameter [mm]: 14.2
- Outer Diameter [mm]: 97
-
Material: Rubber/
Metal - Fitting Position: Front Axle
- Weight [kg]: 0.4
- Supplementary Article/Info 2: with ball bearing
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - Kndmik. VW P. GOLF3/PASSAT KPL Z O½YSKIEM
- Construction Year from: 05.1996
- Construction Year to: 08.1999
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: GSP
- Fitting Position: Rear Axle
- Manufacturer: KAMOKA AMORTYZATORY
- Fitting Position: Rear Axle
- Name: Vedruamordi tugilaager
- Manufacturer: JPA
-
Fitting Position: Rear Axle,
Rear Axle both sides - Supplementary Article/Info 2: without bearing
- Name: Shock absorber mounting kit left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
SEAT/VW
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
SEAT/VW
(kvaliteediklass: PJ)"
-
Engine Code: AEX,
AKV, APQ -
Fitting Position: Front Axle Left,
Front Axle Right - Required quantity: 2
- Supplementary Article/Info 2: with ball bearing
- Manufacturer: CORTECO
- Name: COC 21652902
-
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
-
Name: Laager -
Kndmik VW 96- 10- - Manufacturer: LMI
for OE number: 1K0 412 249 B, 6N0 412 249 B, 6N0 412 249 C, 6N0 412 249 D, 6N0 412 249 E SVHC: No information available, please contact the manufacturer!
-
Engine Code: APQ,
AKV, AEX - Thickness [mm]: 50
- Inner Diameter [mm]: 14.2
- Outer Diameter [mm]: 97
-
Material: Rubber/
Metal - Fitting Position: Front Axle
- Weight [kg]: 0.4
- Supplementary Article/Info 2: with ball bearing
- Manufacturer: SWAG
- Name: SW 30 55 0002
- Lisainfo: 30 55 0002 SWA
- Additional information: 30 55 0002 SWA
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Vehicle Identification Number (VIN) from: 6KY502795
- Fitting Position: 1st front axle on both sides
- Required quantity: 2
- Supplementary Article/Info 2: with ball bearing
- Manufacturer: CORTECO
- Name: COC 80004832
- Fitting Position: Front Axle
- Required quantity: 2
- Manufacturer: TEDGUM
-
Fitting Position: Front Axle,
Front Axle Left, Front Axle Right - Supplementary Article/Info 2: without bearing
-
Material: Rubber/
Metal -
Fabrication Number: AD-
VW- 019 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Material: Rubber/
Metal - Fitting Position: Front Axle
- Weight [kg]: 0.5
- Supplementary Article/Info 2: without ball bearing
- Supplementary Article/Supplementary Info: with attachment material
- Name:
- Manufacturer: FEB
- Additional information: FE14116
- Lisainfo: FE14116
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: AEX,
AKV, APQ -
Fitting Position: Front Axle Left,
Front Axle Right - Required quantity: 2
- Supplementary Article/Info 2: with ball bearing
- Name: COC 80001633
- Manufacturer: CORTECO
-
Vehicle Identification Number (VIN) to: 6K-
Y- 502 794 - Fitting Position: Front Axle
- Supplementary Article/Info 2: without bearing
- reinforced version:
- Quantity Unit: Piece
- Required quantity: 2
- replacement in pairs recommended:
-
Name: Laager -
Kndmik. VW P. GOLF 3/ PASSAT HD - Manufacturer: MEY
General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.
- Construction Year from: 09.1999
- Fitting Position: Front Axle both sides
- for OE number: 1K0 412 249B
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Rear Axle
- Supplementary Article/Info 2: without bearing
- Quantity Unit: Set
- Required quantity: 2
- replacement in pairs recommended:
-
Name: Laager -
Kndmik. VW T. GOLF 2/ 3 - Manufacturer: MEY
-
Fitting Position: Front Axle Right,
Front Axle Left -
Material: Rubber/
Metal - Inner Diameter [mm]: 14
- Outer Diameter [mm]: 97
- Supplementary Article/Info 2: with rolling bearing
- Manufacturer: FAST
-
Material: Rubber/
Metal - Fitting Position: Front Axle
- Weight [kg]: 0.5
- Supplementary Article/Supplementary Info: with attachment material
- Supplementary Article/Info 2: without ball bearing
- Name: SW 30 55 0011
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) to: 6K-
Y- 502 794 - Quantity per axle: 2
-
Fitting Position: Front Axle Left,
Front Axle Right -
Name: Laager -
Kndmik. VW P. GOLF 3/ P - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
-
Vehicle Identification Number (VIN) to: 6K-
Y- 504 288, 6K- Y- 502 794 -
Vehicle Identification Number (VIN) from: 6K-
X- 610 000, 6K- Y- 502 795, 6K- Y- 504 289 -
Fitting Position: Front Axle Left,
Front Axle Right -
Mounting Type: Rubber-
Metal Mount - Inner Diameter [mm]: 14
- Outer Diameter [mm]: 66
- Manufacturer: DELLO AUTOMEGA
-
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
- Name: O½YSKO PODUSZKI AMOKRT. VW P.
- Manufacturer: SAA
- Lisainfo: 801 038
- Additional information: 801 038
for OE number: 1K0 412 249 B, 6N0 412 249 B, 6N0 412 249 C, 6N0 412 249 D, 6N0 412 249 E SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Supplementary Article/Info 2: with bearing
- Quantity Unit: Set
- Required quantity: 2
- replacement in pairs recommended:
-
Name: Laager -
Kndmik. VW P. GOLF 3/ P - Manufacturer: MEY
-
Lisainfo: 1004120003/
S -
Additional information: 1004120003/
S
General Information: MEYLE recomments to use the reinforced version (HD)
- Fitting Position: Front Axle
- Vehicle Identification Number (VIN) to: 6K...X...610000
- SVHC: No SVHC present!
-
Name: Remondikomplekt,
vedruamordi tugilaager - Manufacturer: FAG
-
Vehicle Identification Number (VIN) from: 6K-
Y- 502 795 -
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: JP GROUP
-
Lisainfo: Bearing for strut without bearing,
front -
Additional information: Bearing for strut without bearing,
front
-
Vehicle Identification Number (VIN) to: 6K-
X- 610 000 - Fitting Position: Front Axle
-
for OE number: 357 412 331A,
357 412 331 AS, 7M0 412 331 - Manufacturer: TEDGUM
- Fitting Position: Front Axle
- Weight [kg]: 0.26
- Inner Diameter [mm]: 68
- Outer Diameter [mm]: 111
- Weight [g]: 260
- Manufacturer: METALCAUCHO
- Construction Year to: 09.1999
- Fitting Position: Front Axle
- Quantity per axle: 1
- General Information: Twin Pack for axle repair
-
Name: Laager -
Kndmik VW KPL. - Manufacturer: SKF
- Fitting Position: Front Axle
- Technical Information: Suspension mounting + separated suspension bearing
- Manufacturer: KYB
Name: Laager - Kndmik. FORD P. GALAXY/ SEAT ALHAMBRA, CORDOBA, IBIZA II, INCA, TOLEDO/ VW CADDY II, CORRADO, GOLF III, IV, PASSAT, POLO, SHARAN,
-
Vehicle Identification Number (VIN) to: 6K-
Y- 502 794 - Quantity per axle: 2
-
Fitting Position: Front Axle Left,
Front Axle Right -
Name: Laager -
Kndmik. VW P. GOLF 2, 0 - Manufacturer: SAA
SVHC: No information available, please contact the manufacturer!
- Construction Year to: 09.1999
- Fitting Position: Front Axle
- Outer Diameter [mm]: 97
- Supplementary Article/Info 2: with rolling bearing
-
Alternative Repair Kit: 6490076,
6490031 - Manufacturer: METZGER
-
Vehicle Identification Number (VIN) to: 6K-
Y- 502 794 - Fitting Position: Front Axle
- Supplementary Article/Info 2: with bearing
- reinforced version:
- Quantity Unit: Set
-
Alternative Repair Kit: 100 412 1020/
S - Required quantity: 2
- replacement in pairs recommended:
- Manufacturer: MEY
Name: Laager - Kndmik. VW P. GOLF3/PASSAT KPL Z O½YSKIEM
-
Fitting Position: Right,
Front Axle - Width 1 [mm]: 25
- Inner Diameter 1 [mm]: 68
- Outer Diameter 1 [mm]: 112
- Manufacturer: SNR
-
Vehicle Identification Number (VIN) to: 6K-
Y- 502 794 - Fitting Position: Front Axle
- Supplementary Article/Info 2: with bearing
- Quantity Unit: Set
- Required quantity: 2
- replacement in pairs recommended:
- Manufacturer: MEY
-
Lisainfo: 1004120019/
S -
Additional information: 1004120019/
S
Name: Laager - Kndmik. VW P. GOLF 4 98- KPL. Z O½YSKIEM
- Construction Year to: 09.1999
- Fitting Position: Front Axle
- Quantity per axle: 2
- General Information: SKF recommends always changing in pairs both sides
- Manufacturer: SKF
- Name: SK VKDA35110
-
Fitting Position: Front Axle,
Front Axle both sides - Construction Year to: 09.1999
- Supplementary Article/Info 2: with bearing
- Name: Suspension strut support bearing left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
VW/FORD/SEAT
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
VW/FORD/SEAT
(kvaliteediklass: PJ)"
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Vehicle Identification Number (VIN) from: 6KY-
502 795 -
Fitting Position: Front Axle Left,
Front Axle Right - Required quantity: 2
- Alternative Repair Kit: 80001669
- Supplementary Article/Info 2: without ball bearing
- Name: COC 80001561
- Manufacturer: CORTECO
-
Fitting Position: Right,
Left, Front Axle - Height [mm]: 49
- Width 1 [mm]: 126
- Length [mm]: 134
-
Manufacturer: SNR /
NTN- SNR/ - Name: SN KBLF418.15
-
Vehicle Identification Number (VIN) from: 6K-
Y- 502 795 -
Fitting Position: Front Axle Left,
Front Axle Right -
Mounting Type: Rubber-
Metal Mount - Manufacturer: JP GROUP
-
Lisainfo: Bearing for strut without bearing,
front -
Additional information: Bearing for strut without bearing,
front
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: GSP
- Construction Year to: 09.1999
- Vehicle Identification Number (VIN) to: 6KY502794
- Fitting Position: Front Axle
- Height [mm]: 50
- Required quantity: 2
-
Material: Rubber/
Metal - Outer Diameter [mm]: 97
- Centering Diameter [mm]: 14.2
- Supplementary Article/Info 2: with bearing
- Manufacturer: TRW AMORTYZATORY
for OE number: 1J0412249, 357 412 249 A, 3574-12319-B, 3574-1233-1A, 357412249, 6K0 413 031 B, 7201848 SVHC: No information available, please contact the manufacturer!
- Construction Year to: 09.1999
- Fitting Position: Front Axle
- Weight [kg]: 0.4
- Supplementary Article/Info 2: with rolling bearing
- Warranty: 5 years warranty
- Packaging length [cm]: 13.6
- Packaging width [cm]: 11.8
- Packaging height [cm]: 11.4
- Manufacturer: MONROE
- Fitting Position: Front Axle
- Inner Diameter [mm]: 68
- Outer Diameter [mm]: 112
- Height [mm]: 27
- Bearing Type: Rolling Bearing
-
Name: Laager -
Kndmik VW P. POLO 99- - Manufacturer: MEY
-
Fitting Position: Right,
Left, Front Axle -
Article number of the recommended special tool: Clas :
OM1112, Clas : OP3231 -
Manufacturer: SNR /
NTN- SNR/ - Name: SN KB657.04
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Supplementary Article/Info 2: without ball bearing
- Quantity per axle: 1
- Quantity: 4
- Manufacturer: METZGER
-
Fitting Position: Front Axle Left,
Front Axle Right - for OE number: 6N0 412 331 D
- Manufacturer: GSP
-
Engine Code: AKK,
ANW, AUD - Fitting Position: Front Axle both sides
- Outer Diameter [mm]: 111
- Inner Diameter [mm]: 68
-
Material: Rubber/
Metal - for OE number: 1K0 412 249 B
- Name: Top mount left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
AUDI/VW/SKODA/SEAT
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
AUDI/VW/SKODA/SEAT
(kvaliteediklass: PJ)"
- Construction Year from: 10.1999
- Fitting Position: Front Axle
- for OE number: 6N0412331E
- Manufacturer: SASIC
-
Vehicle Identification Number (VIN) from: 6K-
X- 610 000 - Fitting Position: Front Axle
- Manufacturer: TEDGUM
for OE number: 6N0 412 331, 6N0 412 331 E, 6Q0 412 331 B, 8Z0 412 331
-
Vehicle Identification Number (VIN) from: 6K-
Y- 502 795 - Supplementary Article/Info 2: without ball bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Alternative Repair Kit: 802 418
- Quantity per axle: 2
-
for OE number: 6N0 412 331 E,
6Q0 412 331 B -
Name: Laager -
Kndmik. VW P. POLO 01- - Manufacturer: SAA
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Quantity per axle: 2
-
Name: Laager -
Kndmik. VW T. GOLF/ JETTA/ VENTO - 98 KPL - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Quantity per axle: 2
-
Name: Remondikomplekt,
vedruamordi tugilaager - Manufacturer: SAA
SVHC: No information available, please contact the manufacturer!
- Model Year from: 1997
- Fitting Position: Front Axle
- Weight [kg]: 0.245
- Packaging length [cm]: 11.2
- Packaging width [cm]: 11.2
- Packaging height [cm]: 2.5
- Manufacturer: FEBEST
- Model Year from: 1996
- Model Year to: 2000
- Fitting Position: Front Axle
- Weight [kg]: 0.352
- Packaging length [cm]: 8.2
- Packaging width [cm]: 8.2
- Packaging height [cm]: 5.2
- Manufacturer: FEBEST
-
Vehicle Identification Number (VIN) from: 6K-
Y- 502 795 - Fitting Position: Front Axle
- Supplementary Article/Info 2: without bearing
-
Alternative Repair Kit: 100 412 2038/
S -
Mounting Type: Rubber-
Metal Mount - Required quantity: 2
- replacement in pairs recommended:
-
Name: Laager -
Kndmik. VW P. POLO 99- - Manufacturer: MEY
- Fitting Position: Front Axle
- Weight [kg]: 0.4
- Packaging length [cm]: 14
- Packaging width [cm]: 4.4
- Packaging height [cm]: 14.5
- Manufacturer: MONROE
- Fitting Position: Front Axle
- Supplementary Article/Info 2: with ball bearing
- Manufacturer: BIL
Name: Laager - Kndmik. VW P. GOLF3/PASSAT KPL Z O½YSKIEM
Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
- Fitting Position: Rear Axle
- Quantity per axle: 1
- Supplementary Article/Info 2: without bearing
- General Information: Twin Pack for axle repair
-
Name: Laager -
Kndmik. VW T. GOLF 2/ 3/ VENTO/ POLO - Manufacturer: SKF
-
Vehicle Identification Number (VIN) from: 6K-
Y- 502 795 - Supplementary Article/Info 2: without ball bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Alternative Repair Kit: 31771 01
- Quantity per axle: 2
-
for OE number: 6N0 412 331 E,
6Q0 412 331 B -
Name: Laager -
Kndmik. VW P. A2 - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
-
Vehicle Identification Number (VIN) from: 6K-
Y- 502 795 - Inner Diameter [mm]: 14
- for OE number: 6N0 412 331 E
-
Material: Rubber/
Metal - Fitting Position: Front Axle both sides
-
Outer Diameter [mm]: 65,
66 - Supplementary Article/Info 2: without bearing
- Name: Suspension strut support bearing left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
SKODA/AUDI/VW/SEAT
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
SKODA/AUDI/VW/SEAT
(kvaliteediklass: PJ)"
- Fitting Position: Front Axle
- General Information: suspension strut storage; front
- Manufacturer: VIKA
-
Vehicle Identification Number (VIN) from: 6K-
X- 610 000, 6K- Y- 502 795 - Fitting Position: Front Axle
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: Front Axle
- for OE number: 1K0412249B
- Manufacturer: KAMOKA AMORTYZATORY
- Lisainfo: 209036 KAMOKA
- Additional information: 209036 KAMOKA
- Required quantity: 2
-
Engine Code: AEX,
ANW, AKV, AKK, APQ, AUD - Fitting Position: Front Axle
- for components see parts list:
- Number of Parts [parts]: 2
- Weight [g]: 0.409
- Supplementary Article/Info 2: with rolling bearing
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: Front Axle
- Weight [kg]: 1.085
-
Weight [g]: 1,
085 - Supplementary Article/Info 2: with rolling bearing
- Manufacturer: METALCAUCHO
-
Engine Code: AKK,
ANW, AUD -
Material: Rubber/
Metal - Fitting Position: Front Axle
- Weight [kg]: 1.16
- Supplementary Article/Info 2: with ball bearing
-
Name: Laager -
Kndmik. VW P. POLO 99- - Manufacturer: FEB
- Additional information: FE26460
- Lisainfo: FE26460
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Right,
Left, Front Axle -
Article number of the recommended special tool: Clas :
OM1112, Clas : OP3231 - Manufacturer: SNR
- Name: SN KB657.13
- Inner Diameter [mm]: 68
- Thickness [mm]: 27
- Outer Diameter [mm]: 111
- Weight [kg]: 0.26
-
Material: Metal,
Plastic - Bearing Type: Rolling Bearing
- Required quantity: 2
- Fitting Position: Front Axle
- General Information: deep groove ball thrust bearing; front
- Manufacturer: BORSEHUNG
- Vehicle Identification Number (VIN) from: 6KY502795
-
Fitting Position: Front Axle Left,
Front Axle Right - Required quantity: 2
- Supplementary Article/Info 2: with ball bearing
- Manufacturer: CORTECO
- Name: COC 80001669
- Vehicle Identification Number (VIN) from: 6KY502795
- Construction Year from: 10.1999
-
Fitting Position: Front Axle Left,
Front Axle Right - Height [mm]: 51
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 140
- Bolt Hole Circle Ø [mm]: 58
- Supplementary Article/Supplementary Info: with accessories
- Supplementary Article/Info 2: with ball bearing
- Required quantity: 2
- Manufacturer: TRW
for OE number: 6N0 412 331 D, 6N0 412 331 E, 6N0412331DS1, 6N0412331ES1, 8Z0 412 331, 8Z0 412 331 S1 SVHC: No information available, please contact the manufacturer!
-
Engine Code: AKK,
ANW, AUD - Fitting Position: Front Axle
- Weight [kg]: 1.16
- Supplementary Article/Info 2: with ball bearing
- Manufacturer: SWAG
- Name: SW 30 92 6460
- Lisainfo: 30 92 6460 SWA
- Additional information: 30 92 6460 SWA
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) to: 6K-
Y- 502 794 - Fitting Position: Front Axle
- Supplementary Article/Info 2: with bearing
-
Alternative Repair Kit: 100 412 0019/
S - Full Set:
- Required quantity: 2
- replacement in pairs recommended:
- Manufacturer: MEY
Name: Laager - Kndmik. VW P. GOLF 4 98- KPL. Z O½YSKIEM NA DWIE STRONY
-
Vehicle Identification Number (VIN) to: 6K-
Y- 502 794 - Fitting Position: Front Axle
- Supplementary Article/Info 2: with bearing
- reinforced version:
-
Alternative Repair Kit: 100 412 9020/
S - Full Set:
- Required quantity: 2
- replacement in pairs recommended:
-
Name: Laager -
Kndmik. VW P. GOLF3/ PASSAT 2 STRONY - Manufacturer: MEY
-
Lisainfo: 1004121020/
S -
Additional information: 1004121020/
S
- Vehicle Identification Number (VIN) from: 6KY502795
-
Engine Code: AKK/
ANW/ AUD;AGY -
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: GSP
-
Vehicle Identification Number (VIN) from: 6K-
Y- 502 795 -
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
-
Name: Laager -
Kndmik. VW P. A2 00- 05 LE/ PR KPL - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
- Construction Year from: 10.1999
- Fitting Position: Front Axle
- Weight [kg]: 1.2
- Supplementary Article/Info 2: with rolling bearing
- Warranty: 5 years warranty
- Packaging length [cm]: 13.2
- Packaging width [cm]: 11
- Packaging height [cm]: 10.7
- Manufacturer: MONROE
-
Vehicle Identification Number (VIN) from: 6K-
Y- 502 795 -
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
-
Name: Laager -
Kndmik. VW P. POLO 99- - Manufacturer: SAA
SVHC: No information available, please contact the manufacturer!
-
Engine Code: AKK,
ANW, AUD -
Fitting Position: Front Axle Left,
Front Axle Right - Height [mm]: 50
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 65
- Manufacturer: BGA
- Bearing Type: Rolling Bearing
-
Material: Metal,
Plastic - Fitting Position: Front Axle
- Thickness [mm]: 27
- Weight [kg]: 0.26
- Required quantity: 2
- Inner Diameter [mm]: 68
- Outer Diameter [mm]: 111
- General Information: Repair kit for rubber bush
- Manufacturer: VIKA
-
Vehicle Identification Number (VIN) from: 6K-
Y- 502 795 - Fitting Position: Front Axle
- Supplementary Article/Info 2: with fastening material
- Manufacturer: MEY
Name: Laager - Kndmik. KPL. AUDI A2 (8Z0) (02/00-08/05)/ SEAT IBIZA II / III / CORDOBA / INCA (02/93-06/03), IBIZA IV / CORDOBA (02/02-11/09)/ S
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks