• Weight [kg]: 0.022
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Model Year to: 2010
• Number of pins: 4
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Number of pins: 4
• Fabrication Number: ECM-VV-004
• Manufacturer: NTY

• Number of pins: 2
• Housing Colour: black
• Sensor Type: NTC Sensor
• Manufacturer: FAE

Fabrication Number: ECM-VV-000

• Engine Code: B 5254 T8
• for article number: 1.880.846
• Name: EP 1.830.346
• Manufacturer: EPS

• Required quantity: 2
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Fitting Position: Charge Air Cooler
• Number of pins: 4
• Sensor Type: NTC Sensor
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

Fabrication Number: ESS-VV-001

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Number of connectors: 3
• Colour: black
• Weight [kg]: 0.023
• Name: SW 33 10 4999
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Colour: black
• Number of connectors: 3
• Number of pins: 3
• Weight [kg]: 0.02
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) from: 165000
• Housing Type: with housing, without housing
• Fabrication Number: EPP-TY-006
• Manufacturer: NTY

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 20
• Resistor [Ohm]: 900
• Manufacturer: ERA

• Alternatively:
• Number of pins: 4
• Alternative Repair Kit: 550821
• Manufacturer: ERA

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV909

• Number of pins: 3
• Supplementary Article/Info 2: without cable

• Number of pins: 4
• Pressure from [kPA]: 20
• Pressure to [kPA]: 300
• Manufacturer: FAE

• Construction Year to: 07.2010
• Manufacturer: BOSCH
• Name: BS 0261230295

• Engine Code: B 5254 T8
• Pressure from [kPA]: 22
• Pressure to [kPA]: 305
• Output Voltage, from [V]: 0.41
• Output Voltage, up to [V]: 4.735
• Name: EP 1.993.186
• Manufacturer: EPS

• Cable Length [mm]: 265
• Number of pins: 4
• Manufacturer: DELPHI

• Construction Year to: 04.2009
• Sensor Type: Inductive Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Resistor [Ohm]: 900
• Weight [kg]: 0.04
• Manufacturer: VALEO

• Construction Year to: 07.2010
• Manufacturer: BOSCH

• Number of pins: 4
• Pressure [Pa] from: 22,000
• Pressure [Pa] to: 305,000
• Version: AM
• Manufacturer: METZGER

• Vehicle Identification Number (VIN) to: 165100
• Lambda Sensor: Diagnostic Probe
• Fitting Position: Front
• Exhaust System: after catalytic converter
• Quantity: 1
• Length [mm]: 770
• Number of connectors: 4
• Manufacturer: VERNET

• Construction Year to: 07.2010
• Supplementary Article/Info 2: Low Pressure Side
• Fuel Mixture Formation: Manifold Injection/Direct Injection
• Manufacturer: BOSCH
• Name: BS 0261230238

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 290
• Alternatively:
• Number of circuits: 4
• Alternative Repair Kit: 570112
• Manufacturer: ERA

• Pressure from [kPA]: 22
• Pressure to [kPA]: 305
• Measuring Range from [V]: 0.41
• Measuring Range to [V]: 4.735
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP013112041
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 04.2009
• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 5
• Weight [kg]: 0.26
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

• Engine Code: B5254T6
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 07.2010
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986602

• Engine Code: B 5254 T8
• Vehicle Identification Number (VIN) to: 165100
• Fitting Position: after catalytic converter
• Required quantity: 1
• Cable Length [mm]: 250
• Conductor Number: 4
• Number of circuits: 4
• Name: EP 1.998.235
• Manufacturer: EPS

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Thread Size: M18x1.5
• Cable Length [mm]: 515
• Number of pins: 4
• Fabrication Number: ESL-VV-001
• Manufacturer: NTY

Fitting Position: before catalytic converter, after catalytic converter Lisainfo: ENG. 1.5-2.5 VOLVO S60 II 13-18,S80 II 06-14,S90 II 16-,XC60 13-,XC70 II 13-16,XC90 II 14-/REGULACYJNA, DLA KATALIZATORA WSTPNEGO, Dœ.KABLI 515MM Additional information: ENG. 1.5-2.5 VOLVO S60 II 13-18,S80 II 06-14,S90 II 16-,XC60 13-,XC70 II 13-16,XC90 II 14-/REGULACYJNA, DLA KATALIZATORA WSTPNEGO, Dœ.KABLI 515MM

• Length [mm]: 515
• Number of circuits: 4
• Conductor Number: 4
• Resistor [Ohm]: 2.1
• Cable Length [mm]: 515
• Lambda Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM307

• Construction Year to: 07.2010
• Fuel Mixture Formation: Direct Injection
• Weight [kg]: 0.036
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) from: 165000
• Supplementary Article/Supplementary Info: without suction pipe
• Alternatively:
• Number of pins: 5
• Manufacturer: ERA

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Engine Code: B 5254 T8
• Vehicle Identification Number (VIN) from: 165101
• Fitting Position: after catalytic converter
• Required quantity: 1
• Cable Length [mm]: 450
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: EP 1.998.601
• Manufacturer: EPS

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• for article number: 86340
• Manufacturer: MEAT&DORIA

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Voltage [V]: 12
• Length [mm]: 750
• Number of circuits: 5
• Weight [kg]: 0.16
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV856

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Voltage [V]: 12
• Length [mm]: 580
• Number of circuits: 5
• Weight [kg]: 0.16
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV853

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Length [mm]: 1,000
• Number of circuits: 5
• Weight [kg]: 0.19
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

• Vehicle Identification Number (VIN) to: 87100
• Housing Type: with housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI
• Name: DE AF10411-12B1

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Line insulation design: with silicone-coated woven-fibre insulation
• Overall Length [mm]: 1,230
• Number of pins: 5
• Recommended change interval [km]: 250,000
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 07.2010
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 640
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH

• Construction Year to: 04.2009
• Number of pins: 5
• Supplementary Article/Info 2: with integrated air temperature sensor
• Connector Shape: oval
• Sensor Type: Hot-film Sensor
• Voltage [V]: 12
• Length [mm]: 182
• Width [mm]: 165
• Height [mm]: 125
• Weight [kg]: 0.32
• Manufacturer: VALEO

• Required quantity: 1
• Vehicle Identification Number (VIN) to: 87100
• Mounting Type: Pipe-neck
• Number of pins: 5
• Suction pipe connector diameter [mm]: 80
• Assy./disassy. by qualified personnel required!:
• SVHC: 1317-36-8; Lead monoxide (lead oxide)
• Name: HE 8ET009149371
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: B 5254 T8
• Vehicle Identification Number (VIN) to: 87100
• Required quantity: 1
• Housing Type: with housing
• Length [mm]: 100
• Inner Diameter [mm]: 80
• Outer Diameter [mm]: 80
• Name: EP 1.991.332
• Manufacturer: EPS

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.15
• Warranty: 3 years warranty
• Technical Information: Universal
• Name: CE 09SKV915
• Manufacturer: ESEN SKV

• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Overall Length [mm]: 975
• Number of pins: 4
• Weight [kg]: 0.162
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) from: 165000
• Supplementary Article/Supplementary Info: without suction pipe
• for OE number: 22204-28010
• Quality: OE
• Operating Mode: Electric
• Number of pins: 5
• Gross Weight [g]: 58
• Manufacturer: DENSO

Additional information: "Tootja: DENSO
NOAH (ZRR7/), 12.01-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
NOAH (ZRR7/), 12.01-
(kvaliteediklass: Q)"

• Vehicle Identification Number (VIN) from: 165101
• for OE number: 31319664, 31370197 / 31370666
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 515
• Number of pins: 4
• Weight [g]: 97
• Gross Weight [g]: 130
• Manufacturer: DENSO
• Name: DN DOX-0535

Lambda Sensor: Regulating Probe, Heated, Finger probe, Broadband lambda sensor, Thread pre-greased

• Construction Year to: 07.2010
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 580
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH

• Number of pins: 6
• Connector Shape: oval
• Number of mounting bores: 3
• Vehicle Equipment: for vehicles with automatic transmission
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• for OE number: 31329058
• Manufacturer: MEAT&DORIA

• Number of mounting bores: 3
• Number of pins: 6
• Transmission Type: Automatic Transmission
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PV010834811
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 07.2008
• Manufacturer: METZGER