Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: inner,
Rear Axle - Material: Rubber
- Length [mm]: 48
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 41
- Manufacturer: MERTZ
- Fitting Position: Front Axle
- Material: Rubber
- Thickness [mm]: 47
- Length [mm]: 52
- Width [mm]: 45
- Inner Diameter [mm]: 22
- Outer Diameter [mm]: 45
- Manufacturer: MERTZ
- Required quantity: 2
- Mounting Type: Rubber Mount
- Material: Rubber
- Length [mm]: 47
- Inner Diameter [mm]: 22
- Weight [kg]: 0.089
- Manufacturer: VAICO
Fitting Position: Front Axle Left, Front Axle Right, Front Axle both sides General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
- Diameter [mm]: 21
- Weight [kg]: 0.107
- Inner Diameter [mm]: 20
- Packaging length [cm]: 5.2
- Packaging width [cm]: 5
- Packaging height [cm]: 4.5
- Manufacturer: FEBEST
-
Fitting Position: Front Axle Left,
Front Axle Right - Length [mm]: 51.6
- Width [mm]: 45.1
- Thickness [mm]: 46.5
- Inner Diameter [mm]: 21.5
- Outer Diameter [mm]: 45.1
- Material: Rubber
- Weight [kg]: 0.09
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle Left,
Front Axle Right - Length [mm]: 51.6
- Width [mm]: 45.1
- Thickness [mm]: 46.5
- Inner Diameter [mm]: 21.5
- Outer Diameter [mm]: 45.1
- Material: Rubber
- Weight [kg]: 0.09
- Manufacturer: SWAG
- Name: SW 50 10 2341
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle both sides,
inner, Left, Right, outer -
Fabrication Number: ZGS-
FR- 000 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Inner Diameter [mm]: 18
- Mounting Type: Rubber Mount
- Fitting Position: Rear Axle both sides
- Weight [kg]: 0.073
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Diameter [mm]: 21
- Weight [kg]: 0.095
- Inner Diameter [mm]: 18
- Packaging length [cm]: 4.7
- Packaging width [cm]: 4.7
- Packaging height [cm]: 4
- Manufacturer: FEBEST
- Length [mm]: 48
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 41
- Material: Rubber
-
Fitting Position: inner,
Rear Axle - Weight [kg]: 0.074
- Manufacturer: FEBI BILSTEIN
- Additional information: FE106551
- Lisainfo: FE106551
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle
- Diameter [mm]: 24
- Weight [kg]: 0.134
- Packaging length [cm]: 5.3
- Packaging width [cm]: 5.3
- Packaging height [cm]: 4.6
- Manufacturer: FEBEST
- Length [mm]: 48
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 41
- Material: Rubber
-
Fitting Position: inner,
Rear Axle - Weight [kg]: 0.074
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Stabiliser Bar Diameter [mm]: 21
- Length [mm]: 47.1
- Width [mm]: 45
- Thickness [mm]: 52.5
- Inner Diameter [mm]: 21
- Material: Rubber
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.096
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 41
- Width [mm]: 48
- Thickness [mm]: 48
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 41
-
Fitting Position: inner,
Rear Axle - Weight [kg]: 0.04
- Manufacturer: DENCKERMANN FILTRY
- Stabiliser Bar Diameter [mm]: 21
- Length [mm]: 47.1
- Width [mm]: 45
- Thickness [mm]: 52.5
- Inner Diameter [mm]: 21
- Material: Rubber
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.1
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Manufacturer: MAGNETI MARELLI
- Fitting Position: Front Axle
- Manufacturer: MAGNETI MARELLI
-
Fitting Position: Rear Axle,
inner -
Material: PU
(Polyurethane) - Colour: red
- Supplementary Article/Info 2: with grease cap
- Required quantity: 2
- Name: TG TED40325
- Manufacturer: TEDGUM