Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Construction Year from: 08.1998
-
Vehicle Identification Number (VIN) from: 1U-
X- 134 201 -
for OE number: 06A906262AK,
023906262 -
Exhaust System: for pre-
catalytic converter - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
-
Cable Length [mm]: 1,
250 - Number of pins: 4
- Weight [g]: 160
- Gross Weight [g]: 193
- Manufacturer: DENSO
-
Name: DN DOX-
2012
Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor
Additional information: "Tootja: DENSO
PASSAT VARIANT (3B5)
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
PASSAT VARIANT (3B5)
(kvaliteediklass: Q)"
-
Lambda Sensor: Regulating Probe,
Thread pre- greased - Number of circuits: 4
- Fitting Position: before catalytic converter
-
Fabrication Number: ESL-
AU- 011 -
Name: NTY ESL-
AU- 011 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of circuits: 4
- Lambda Sensor: Regulating Probe
- Manufacturer: KAMOKA
- Construction Year from: 08.1998
- Vehicle Identification Number (VIN) from: 1UX134201
-
Lambda Sensor: Diagnostic Probe,
Thread pre- greased -
Fabrication Number: ESL-
SK- 000 - Manufacturer: NTY
-
Name: NTY ESL-
SK- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Lambda Sensor: Finger probe
-
Fabrication Number: ESL-
AU- 025 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Technical Information Number: Universal
- Overall Length [mm]: 325
- Number of pins: 4
- Lambda Sensor: Regulating Probe
- Manufacturer: ASHIKA
-
Lisainfo: 43-
U04 -
Additional information: 43-
U04
- Engine Code: AEH
- Construction Year to: 07.1998
- Vehicle Identification Number (VIN) from: 1U..V..007 001
- Vehicle Identification Number (VIN) to: 1U..W..134 200
- Number of pins: 4
- Overall Length [mm]: 490
- Lambda Sensor: Regulating Probe
- Manufacturer: JP GROUP
- Lisainfo: Lambda sensor
- Additional information: Lambda sensor
- Technical Information Number: Universal
- Overall Length [mm]: 325
- Number of pins: 4
- Lambda Sensor: Regulating Probe
- Manufacturer: JAPKO
- Engine Code: AEH
- Construction Year to: 07.1998
-
Lambda Sensor: Regulating Probe,
Finger probe - Vehicle Identification Number (VIN) from: 1U..V..007001
- Vehicle Identification Number (VIN) to: 1U..W..134200
- Fitting Position: before catalytic converter
- Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: MAX
-
Lisainfo: MGS-
505 -
Additional information: MGS-
505
-
Engine Code: AEH,
AKL -
Vehicle Identification Number (VIN) from: 1U-
X- 134201 - Lambda Sensor: Regulating Probe
- Number of circuits: 4
- Lisainfo: Lambda sensor
- Additional information: Lambda sensor
- Engine Code: AEH
- Construction Year to: 07.1998
-
Lambda Sensor: Regulating Probe,
Lambda Sensor - Vehicle Identification Number (VIN) from: 1U..V..007001
- Vehicle Identification Number (VIN) to: 1U..W..134200
- Fitting Position: before catalytic converter
- Number of circuits: 4
- Overall Length [mm]: 490
- Name: LAMBDA ANDUR
- Manufacturer: MAX
- Construction Year to: 07.1998
- Vehicle Identification Number (VIN) from: 1UV007001
- Vehicle Identification Number (VIN) to: 1UW134200
- Fitting Position: Front
- Exhaust System: before catalytic converter
- Lambda Sensor: Regulating Probe
- Number of connectors: 4
- Length [mm]: 475
- Manufacturer: VERNET
- Length [mm]: 470
- Number of circuits: 4
- Resistor [Ohm]: 2.1
- Conductor Number: 4
- Cable Length [mm]: 470
- Lambda Sensor: Heated
- Name: LAMBDA ANDUR
- Manufacturer: MAG
-
Engine Code: AEH,
AKL -
Construction Year from: 08.1998,
08.2000 -
Construction Year to: 09.2004,
05.2007 -
Lambda Sensor: Regulating Probe,
Heated - Vehicle Identification Number (VIN) from: 1U..X..134201
- Block Separation:
- Fitting Position: before catalytic converter
- Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: MAX
-
Lisainfo: MGS-
615 -
Additional information: MGS-
615
- Construction Year to: 07.1998
-
Vehicle Identification Number (VIN) from: 1U-
V- 007 001 -
Vehicle Identification Number (VIN) to: 1U-
W- 134 200 -
Exhaust System: for pre-
catalytic converter - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Weight [g]: 103
- Gross Weight [g]: 152
- Manufacturer: DENSO
-
Name: DN DOX-
0117 - Quality class: Q
Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor
Additional information: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)"
- Engine Code: AEH
- Vehicle Identification Number (VIN) to: ******1U*V*007000
-
Lambda Sensor: Regulating Probe,
Heated -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 720
- Weight [kg]: 0.118
- for OE number: 06A 906 265 F
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 550
- Number of circuits: 4
- Resistor [Ohm]: 4.5
- Conductor Number: 4
- Cable Length [mm]: 550
- Lambda Sensor: Heated
- Name: LAMBDA ANDUR
- Manufacturer: MAG
-
Lambda Sensor: Regulating Probe,
Finger probe, Heated -
Vehicle Identification Number (VIN) from: 1U-
V- 007 001, 1UV007001 - Engine Code: AEH
- Block Separation:
- Construction Year to: 07.1998
- Fitting Position: before catalytic converter
- Vehicle Identification Number (VIN) to: 1UW134200
- Cable Length [mm]: 470
- Name: LAMBDA ANDUR
- Manufacturer: DLP
- Quality class: PJ
Additional information: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)"
- Construction Year from: 08.1998
-
Fitting Position: Front,
before catalytic converter - Vehicle Identification Number (VIN) from: 1UX134201
-
Line insulation design: with silicone-
coated woven- fibre insulation - Cable Length [mm]: 720
- Number of circuits: 4
- Weight [kg]: 0.156
- Manufacturer: VEMO GERMANY
Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: AEH
-
Vehicle Identification Number (VIN) to: 1U-
V- 007 000 -
Lambda Sensor: Heated,
Regulating Probe -
Thread Size: M18 x 1,
5 - Number of pins: 4
- Connector Shape: D Shape
- Overall Length [mm]: 710
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Construction Year from: 08.1998
-
Lambda Sensor: Regulating Probe,
Planar probe, Heated - Fitting Position: before catalytic converter
- Vehicle Identification Number (VIN) from: 1UX134201
- Alternatively:
- Cable Length [mm]: 2
- Name: LAMBDA ANDUR
- Manufacturer: DLP
Additional information: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)"
- Lambda Sensor: Lambda Sensor
-
Cable Length [mm]: 1,
750 - Number of circuits: 4
- Manufacturer: ERA
- Engine Code: AEH
-
Vehicle Identification Number (VIN) to: 1U-
W- 134200 -
Vehicle Identification Number (VIN) from: 1U-
V- 007001 -
Line insulation design: with silicone-
coated woven- fibre insulation -
Thread Size: M18 x 1,
5 - Socket colour: black
- Exhaust System: before catalytic converter
- Number of circuits: 4
- Connector Shape: D Shape
- Cable Length [mm]: 390
- Weight [kg]: 0.127
- for OE number: 032 906 265 F
- Length [mm]: 500
- Number of pins: 4
- Number of connectors: 4
-
Lambda Sensor: Regulating Probe,
Thread pre- greased - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Lambda Sensor: Regulating Probe
- Construction Year from: 08.1998
- Voltage [V]: 12
-
Length [mm]: 1,
175 - Number of circuits: 4
- Weight [kg]: 0.13
- Operating Mode: Electric
- Warranty: 3 years warranty
- Name: CE 09SKV038
- Manufacturer: ESEN SKV
- Construction Year to: 07.1998
- Lambda Sensor: Regulating Probe
- Voltage [V]: 12
- Length [mm]: 730
- Number of circuits: 4
- Weight [kg]: 0.16
- Resistor [Ohm]: 2.1
- Operating Mode: Electric
- Warranty: 3 years warranty
- Name: CE 09SKV602
- Manufacturer: ESEN SKV
- Construction Year from: 08.1998
-
Lambda Sensor: Regulating Probe,
Unheated - Fitting Position: Exhaust Manifold
- Number of pins: 4
-
Cable Length [mm]: 1,
050 - Quality: OE EQUIVALENT
- Manufacturer: MEAT&DORIA
- Resistor [Ohm]: 9
- Number of circuits: 4
-
Length [mm]: 1,
731 - Conductor Number: 4
-
Cable Length [mm]: 1,
731 - Lambda Sensor: Heated
- Name: LAMBDA ANDUR
- Manufacturer: MAG
-
Engine Code: AEH,
AKL -
Vehicle Identification Number (VIN) from: 1U-
V- 007001 -
Line insulation design: with silicone-
coated woven- fibre insulation - Number of pins: 4
- for OE number: V99760001
- Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Length [mm]: 350
- Exhaust System: after catalytic converter
- Manufacturer: VEMO GERMANY
Lambda Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 08.1998
- Lambda Sensor: Diagnostic Probe
- Voltage [V]: 12
-
Length [mm]: 1,
670 - Number of circuits: 4
- Weight [kg]: 0.21
- Resistor [Ohm]: 9
- Operating Mode: Electric
- Warranty: 3 years warranty
- Name: CE 09SKV624
- Manufacturer: ESEN SKV
- Construction Year from: 06.1998
- Construction Year to: 09.2000
- Engine Code: AEH
- Vehicle Identification Number (VIN) to: 1U..V..007 000
- Fitting Position: before catalytic converter
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Lambda Sensor: Planar probe,
Heated, Thread pre- greased - Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Manufacturer: VEMO GERMANY
Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: AEH
- Construction Year to: 07.1998
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Vehicle Identification Number (VIN) from: 1U..V..007 001
- Vehicle Identification Number (VIN) to: 1U..W..134 200
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Manufacturer: BOSCH
- Name: BS 0258986505
- Engine Code: AEH
-
Vehicle Identification Number (VIN) from: 1U-
V- 007 000 -
Line insulation design: with silicone-
coated woven- fibre insulation - Weight [kg]: 0.139
- Number of circuits: 4
- Connector Shape: D Shape
- Socket colour: black
- Number of pins: 4
- for OE number: 030 906 265 BS
- Cable Length [mm]: 600
-
Thread Size: M18 x 1,
5 - Length [mm]: 720
- Number of connectors: 4
-
Lambda Sensor: Regulating Probe,
Thread pre- greased - Exhaust System: before catalytic converter
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Exhaust System: for pre-
catalytic converter -
Vehicle Identification Number (VIN) from: 1U-
X- 134 201 - Cable Length [mm]: 1
-
Lambda Sensor: Planar probe,
Heated - Name: LAMBDA ANDUR
- Manufacturer: DLP
Additional information: "Tootja: DELPHI
OCTAVIA (1U2), 09.96
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
OCTAVIA (1U2), 09.96
(kvaliteediklass: PJ)"
-
Engine Code: AEH,
AKL -
Construction Year from: 08.1998,
08.2000 -
Construction Year to: 09.2004,
05.2007 - Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Vehicle Identification Number (VIN) from: 1U..X..134 201
- Block Separation:
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
- Lambda Sensor: Heated
- Overall Length [mm]: 710
- Number of pins: 4
-
Recommended change interval [km]: 160,
000 - General Information: lambda probe; 4 wire
- Manufacturer: VIKA
- Construction Year from: 08.1998
-
Vehicle Identification Number (VIN) from: 1U-
X- 134 201 -
Exhaust System: for pre-
catalytic converter - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Weight [g]: 93
- Gross Weight [g]: 140
- Manufacturer: DENSO
-
Name: DN DOX-
0150 - Quality class: Q
Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
-
Engine Code: AEH,
AKL -
Construction Year from: 08.1998,
08.2000 -
Construction Year to: 09.2004,
05.2007 -
Lambda Sensor: Regulating Probe,
Heated - Vehicle Identification Number (VIN) from: 1U..X..134201
- Block Separation:
- Fitting Position: before catalytic converter
- Number of circuits: 4
-
Overall Length [mm]: 1,
760 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: MAX
-
Engine Code: AKL,
AEH -
Line insulation design: with silicone-
coated woven- fibre insulation -
Overall Length [mm]: 1,
800 - Number of pins: 4
-
Recommended change interval [km]: 160,
000 - Weight [kg]: 0.166
-
Lambda Sensor: Thread pre-
greased - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Vehicle Identification Number (VIN) from: 1U-
V- 007 001 -
Vehicle Identification Number (VIN) to: 1U-
W- 134 200 - Transmission Type: Manual Transmission
- Lambda Sensor: Finger probe
-
Thread Size: M18 x 1,
5 - Cable Length [mm]: 500
- Supplementary Article/Supplementary Info: with thermal protection
- Number of pins: 4
- Fitting Position: before catalytic converter
- Name: Lambda andur
- Manufacturer: MEY
- Construction Year from: 08.1998
- Lambda Sensor: Regulating Probe
-
Length [mm]: 1,
100 - Technical Information Number: Universal 77015
- Manufacturer: FAE
- Construction Year to: 07.1998
-
Vehicle Identification Number (VIN) from: 1U-
V- 007 001 -
Vehicle Identification Number (VIN) to: 1U-
W- 134 200 -
Exhaust System: for pre-
catalytic converter - for OE number: 06A906265E
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 705
- Number of pins: 4
- Weight [g]: 128
- Gross Weight [g]: 158
- Manufacturer: DENSO
-
Name: DN DOX-
1551 - Quality class: Q
Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
-
Vehicle Identification Number (VIN) from: V-
007 001 -
Vehicle Identification Number (VIN) to: W-
134 200 - Engine Code: AEH
- Fitting Position: before catalytic converter
-
Lambda Sensor: Planar probe,
Thread pre- greased, Heated - Number of pins: 4
- Cable Length [mm]: 500
-
Thread Size: M18x1,
5 - Switch Pressure [bar]: 4
- Weight [kg]: 0.156
- Name: VA 368447
- Manufacturer: VALEO
- Engine Code: AEH
-
Vehicle Identification Number (VIN) from: 1-
U- W- 109 000, 1- U- V- 007 000 - Lambda Sensor: Finger probe
-
Thread Size: M18 x 1,
5 - Cable Length [mm]: 720
- Number of pins: 4
- Fitting Position: before catalytic converter
- Name: Lambda andur
- Manufacturer: MEY
- Construction Year from: 08.1998
- Fitting Position: before catalytic converter
- Vehicle Identification Number (VIN) from: 1U_X_134201
- Lambda Sensor: Regulating Probe
-
Cable Length [mm]: 1,
750 - Number of pins: 4
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PA358066391
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Construction Year to: 07.1998
- Fitting Position: Exhaust Manifold
-
Line insulation design: with silicone-
coated woven- fibre insulation - Socket colour: black
- Number of circuits: 4
- Cable Length [mm]: 540
- Connector Shape: D Shape
- Weight [kg]: 0.166
- for OE number: 06A 906 265 AP
-
Thread Size: M18 x 1,
5 - Length [mm]: 680
- Number of pins: 4
-
Lambda Sensor: Regulating Probe,
Thread pre- greased - Exhaust System: before catalytic converter
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Lambda Sensor: Heated
- Overall Length [mm]: 490
- Number of pins: 4
-
Recommended change interval [km]: 160,
000 - General Information: lambda probe; 4 wire
- Manufacturer: VIKA
-
Engine Code: AEH,
AKL -
Construction Year from: 08.1998,
08.2000 -
Construction Year to: 09.2004,
05.2007 - Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Vehicle Identification Number (VIN) from: 1U..X..134 201
- Block Separation:
- Number of circuits: 4
-
Overall Length [mm]: 1,
760 - Available as universal article as well, see article no.: 0258986615
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
- Engine Code: AEH
- Construction Year to: 07.1998
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Vehicle Identification Number (VIN) from: 1U..V..007 001
- Vehicle Identification Number (VIN) to: 1U..W..134 200
- Number of circuits: 4
- Overall Length [mm]: 490
- Available as universal article as well, see article no.: 0258986505
-
Recommended change interval [km]: 160,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
- Lambda Sensor: Heated
- Number of pins: 4
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Connector/Clamp: Connector may need adjustment
- Lambda Sensor: Heated
-
Overall Length [mm]: 1,
760 - Number of pins: 4
-
Recommended change interval [km]: 160,
000 - General Information: lambda probe; 4 wire
- Manufacturer: VIKA
-
Vehicle Identification Number (VIN) from: W-
134 201 -
Lambda Sensor: Planar probe,
Thread pre- greased, Heated - Number of pins: 4
-
Cable Length [mm]: 1,
800 -
Thread Size: M18x1,
5 - Switch Pressure [bar]: 4
- Weight [kg]: 0.23
- Manufacturer: VALEO
- Name: VA 368003
Fitting Position: before catalytic converter, after catalytic converter
- Construction Year from: 08.1998
-
Lambda Sensor: Regulating Probe,
Broadband lambda sensor - Fitting Position: before catalytic converter
- Vehicle Identification Number (VIN) from: 1U_X_134201
- Cable Length [mm]: 800
- Number of pins: 6
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Name: Lambda andur
- Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.