Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Left,
Drive Axle -
Transmission Type: 5-
Speed Manual Transmission - Construction Year from: 08.2000
- Inner Diameter [mm]: 48
- Outer Diameter [mm]: 62
- Height [mm]: 7
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Fitting Position: Centre
- Inner Diameter [mm]: 18
- Thickness [mm]: 8
- Outer Diameter [mm]: 30
- Weight [kg]: 0.011
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle Left,
Drive Axle -
Transmission Type: 5-
Speed Manual Transmission - Construction Year from: 08.2000
- Inner Diameter [mm]: 48
- Outer Diameter [mm]: 62
- Height [mm]: 7
-
Material: ACM
(Polyacrylate) - Dust Cover: with dust lip
- Swirl Type: Alternating Twist
-
Name: Volli rongastihend,
diferentsiaal - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Outlet,
outer -
Transmission Code: DLL/
DUU - Inner Diameter [mm]: 50
- Thickness [mm]: 10
- Seal Diameter [mm]: 65.5
- Shape: O Shape
-
Material: ACM
(Polyacrylate) - Outer Diameter [mm]: 65.5
- Weight [kg]: 0.024
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Outer Diameter [mm]: 65.2
- Inner Diameter [mm]: 50
- Height [mm]: 10
- Fitting Position: Outlet
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Inner Diameter [mm]: 50
- Outer Diameter [mm]: 65
- Height [mm]: 10
- Fitting Position: Drive Axle
-
Material: ACM
(Polyacrylate) - Dust Cover: with dust lip
- Swirl Type: Alternating Twist
- Manufacturer: TOPRAN
- Lisainfo: 100 076 HP
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Centre
- General Information: radial shaft seal
- Manufacturer: BORSEHUNG
- Model Year from: 2001
- Fitting Position: Left
- Weight [kg]: 0.035
- Packaging length [cm]: 7.4
- Packaging width [cm]: 7.4
- Packaging height [cm]: 0.8
- Manufacturer: FEBEST
-
Fitting Position: Outlet,
Drive Axle -
Transmission Code: DLL,
DUU - Inner Diameter 1 [mm]: 50
- Outer Diameter 1 [mm]: 65.2
- Height 1 [mm]: 10
-
Material: ACM
(Polyacrylate) - Dust Cover: with dust lip
- Swirl Type: Alternating Twist
-
Name: VOLLI RONGASTIHEND,
JAOTUSKAST - Manufacturer: COT
-
Fitting Position: Front Axle,
Outlet, Left - Inner Diameter 1 [mm]: 60
- Outer Diameter 1 [mm]: 74
- Height 1 [mm]: 8
-
Material: ACM
(Polyacrylate) - Dust Cover: with dust lip
- Swirl Type: Alternating Twist
-
Name: VOLLI RONGASTIHEND,
DIFERENTSIAAL - Manufacturer: COT
- Fitting Position: frontal sided
- Inner Diameter [mm]: 51
- Outer Diameter [mm]: 65
- Thickness [mm]: 7
- Weight [kg]: 0.016
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- General Information: tapered ring; small
- Manufacturer: VIKA
- General Information: taper roller bearing
- Manufacturer: VIKA
- Outer Diameter [mm]: 47
- Thickness [mm]: 10
- Inner Diameter [mm]: 32
- Fitting Position: transmission sided
- Weight [kg]: 0.195
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks