• Vehicle Identification Number (VIN) from: 1U-Y-275 062
• Material: Plastic
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Vehicle Identification Number (VIN) from: 1U-Y-275 062
• Thickness [mm]: 3.5
• Inner Diameter [mm]: 19.5
• Material: NBR (nitrile butadiene rubber)
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Manufacturer: JP GROUP
• Lisainfo: Quick coupling piece
• Additional information: Quick coupling piece

• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Material: Plastic
• Weight [kg]: 0.015
• Required quantity: 1
• General Information: retaining spring
• Manufacturer: VIKA

• Vehicle Identification Number (VIN) from: 1U-Y-275 062
• Thickness [mm]: 3.5
• Inner Diameter [mm]: 19.5
• Material: NBR (nitrile butadiene rubber)
• Weight [kg]: 0.003
• Name: TIHEND,JAHUTUSVEDEDELIKUFLANTS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: engine sided
• Seal Diameter [mm]: 50
• Thickness [mm]: 3.15
• Shape: O Shape
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• Width [mm]: 32
• Thickness [mm]: 1.98
• Material: Steel
• Weight [kg]: 0.001
• Name: KINNITUSVEDRU, JAHUTUSVEDELIKUFLANTS-SULGURKORK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 1U-Y-275 062
• Material: Plastic
• Weight [kg]: 0.015
• Name: KINNITUSVEDRU, JAHUTUSVEDELIKUFLANTS-SULGURKORK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: engine sided
• Seal Diameter [mm]: 50
• Thickness [mm]: 3.15
• Shape: O Shape
• Surface: nubby
• Name: TIHEND,JAHUTUSVEDEDELIKUFLANTS
• Manufacturer: HAN

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Cylinder Head
• Inner Diameter [mm]: 50
• Outer Diameter [mm]: 56.3
• Thickness [mm]: 3.15
• Shape: O-Ring
• Manufacturer: ELRING

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• Transmission Type: Automatic Transmission
• Vehicle Equipment: for vehicles without air conditioning
• Model Year to: 2000
• Block Separation:
• Model Year from: 2001
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Housing material: Plastic
• Number of inlets/outlets: 1
• for OE number: 1J0122291
• Manufacturer: DELLO AUTOMEGA

• Transmission Type: Automatic Transmission
• Number of inlets/outlets: 4
• Material: GRP (Glass fibre Reinforced Plastic)
• for OE number: 1J0 121 087C
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Type: Automatic Transmission
• Vehicle Equipment: for vehicles with air conditioning
• Construction Year to: 07.2000
• Number of inlets/outlets: 4
• Material: GRP (Glass fibre Reinforced Plastic)
• Heating/Cooling: with thermal switch connector
• for OE number: 1J0 121 087A
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of inlets/outlets: 3
• Material: GRP (Glass fibre Reinforced Plastic)
• for pipe diameter [mm]: 32, 8
• for OE number: 1J0 121 087B
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 1J0 121 087A
• Material: GRP (Glass fibre Reinforced Plastic)
• Heating/Cooling: with thermal switch connector
• Fabrication Number: CTM-VW-019
• Manufacturer: NTY

• for OE number: 1J0 122 291D
• Material: Plastic
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: DELLO AUTOMEGA

• Vehicle Equipment: for vehicles with air conditioning
• Transmission Type: Automatic Transmission
• Model Year to: 2000
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• for OE number: 1J0 121 087B
• Material: GRP (Glass fibre Reinforced Plastic)
• Fabrication Number: CTM-VW-018

• Fitting Position: Front
• Material: Plastic
• Supplementary Article/Supplementary Info: with seal
• Fabrication Number: CTM-VW-013

• Forward- /Backflow: for foreflow
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Fitting Position: Front
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Material: GRP (Glass fibre Reinforced Plastic)
• for OE number: 1J0 121 087B
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: MAX

• Transmission Type: Automatic Transmission
• Material: GRP (Glass fibre Reinforced Plastic)
• for OE number: 1J0 121 087C
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: MAX

• Supplementary Article/Supplementary Info: with seal
• Material: Plastic
• Fitting Position: Front
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Supplementary Info: with seal
• Number of inlets/outlets: 2
• for OE number: 1J0 122 291D
• Consult accessories list for recommended additional repairs:
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 1J0 122 291 D
• Name: Jahutusvedeliku flants
• Manufacturer: MAX

• Material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Supplementary Info: with seal
• Number of inlets/outlets: 2
• for OE number: 1J0 122 291
• Consult accessories list for recommended additional repairs:
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Type: Automatic Transmission
• Construction Year to: 07.2000
• Supplementary Article/Supplementary Info: without gasket/seal
• Vehicle Equipment: for vehicles with air conditioning
• Weight [kg]: 0.054
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 1J0121087B
• Supplementary Article/Supplementary Info: with seal
• Weight [g]: 45
• Supplementary Article/Info 2: without thermostat
• Name: IM 90305
• Manufacturer: ORIGINAL IMPERIUM

• for OE number: 1J0122291D
• Manufacturer: NRF

• Transmission Type: Automatic Transmission
• Construction Year to: 07.2000
• Vehicle Equipment: for vehicles with air conditioning
• Heating/Cooling: with thermal switch connector
• Material: GRP (Glass fibre Reinforced Plastic)
• for OE number: 1J0 121 087A
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: MAX

• General Information: distributor
• Manufacturer: VIKA

• Material: GRP (Glass fibre Reinforced Plastic)
• Number of inlets/outlets: 4
• General Information: distributor
• Manufacturer: VIKA

• Fitting Position: Radiator, Lower
• Material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Supplementary Info: with seal
• Number of inlets/outlets: 2
• Supplementary Article/Info 2: with bracket, with breather valve
• for OE number: 6Q0 122 291F
• Consult accessories list for recommended additional repairs:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Material: Plastic
• Manufacturer: DELLO AUTOMEGA

• for OE number: 1J0122291D
• Supplementary Article/Supplementary Info: with seal
• Weight [g]: 31
• Supplementary Article/Info 2: without thermostat
• Name: IM 90569
• Manufacturer: ORIGINAL IMPERIUM

• Vehicle Identification Number (VIN) to: 1U-V-034000
• Number of inlets/outlets: 3
• Material: GRP (Glass fibre Reinforced Plastic)
• for pipe diameter [mm]: 8, 20
• for OE number: 1J0 121 087D
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Material: GRP (Glass fibre Reinforced Plastic)
• Number of inlets/outlets: 3
• General Information: distributor
• Manufacturer: VIKA

• for OE number: 1J0 122 291
• Weight [kg]: 0.05
• Fitting Position: Radiator
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Lower
• Fabrication Number: CTM-VW-022
• Manufacturer: NTY

• for OE number: 038121121
• Manufacturer: NRF

• Fitting Position: Cylinder Head, transmission sided
• Material: Plastic
• Heating/Cooling: with thermal switch connector
• Supplementary Article/Info 2: with seal ring
• Fabrication Number: CTM-VW-020
• Manufacturer: NTY

• Vehicle Equipment: for vehicles with air conditioning
• Number of inlets/outlets: 3
• Material: GRP (Glass fibre Reinforced Plastic)
• for pipe diameter [mm]: 8, 32
• for OE number: 1J0 121 087
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Lower
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: MAX

• Housing material: Plastic
• Colour: black
• Number of inlets/outlets: 3
• Supplementary Article/Supplementary Info: with seal
• for OE number: 038121132C
• Manufacturer: DELLO AUTOMEGA

• for OE number: 038 121 121
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Fitting Position: Cylinder Head
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Engine Code: AGR
• Material: Plastic
• Fitting Position: Front
• Weight [kg]: 0.05
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Cylinder Head
• Thickness [mm]: 5
• Width [mm]: 56
• Length [mm]: 56
• Name: Tihend,jahutusvededelikuflants
• Manufacturer: AJU

• Fitting Position: Radiator, Upper
• for OE number: 1J0121619
• Manufacturer: NRF

• Material: GRP (Glass fibre Reinforced Plastic)
• Heating/Cooling: with thermal switch connector
• Number of inlets/outlets: 4
• General Information: distributor
• Manufacturer: VIKA

• Fitting Position: Engine Block, Front, Left
• Housing Type: Synthetic Material Housing
• Supplementary Article/Supplementary Info: without gasket/seal
• Manufacturer: METZGER

• Fitting Position: Lower
• Weight [kg]: 0.082
• Required quantity: 1
• General Information: pipe union
• Manufacturer: VIKA

• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 20
• Weight [kg]: 0.03
• for OE number: 1J0 122 291 D
• Name: SW 30 94 5980
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Material: Plastic
• Fitting Position: Cylinder Head, transmission sided
• Supplementary Article/Info 2: with seal ring
• Heating/Cooling: with thermal switch connector
• Name: Jahutusvedeliku flants
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: AGR
• Transmission Type: Manual Transmission
• Weight [kg]: 0.047
• for OE number: 1J0 121 087 B
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front
• Supplementary Article/Supplementary Info: with seal

• Weight [kg]: 0.165
• Supplementary Article/Supplementary Info: with seal
• Supplementary Article/Info 2: without thermostat
• Manufacturer: METALCAUCHO

• Engine Code: AGR
• Material: Plastic
• Fitting Position: Front
• Weight [kg]: 0.05
• Name: SW 30 91 8230
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 1J0 122 291 D
• Weight [kg]: 0.03
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front
• Material: Plastic
• Supplementary Article/Supplementary Info: without gasket/seal
• Weight [g]: 78
• Supplementary Article/Info 2: without thermostat
• Name: IM 90000
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Lower
• Manufacturer: JP GROUP
• Lisainfo: Quick coupling piece
• Additional information: Quick coupling piece

• Engine Code: AGR
• Vehicle Equipment: for vehicles with air conditioning
• Colour: black
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: MAX

• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 20
• Weight [kg]: 0.031
• for OE number: 1J0 122 291 D
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: AGR
• Transmission Type: Manual Transmission
• Weight [kg]: 0.047
• for OE number: 1J0 121 087 B
• Name: SW 33 10 3756
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Behind the radiator, Upper
• for OE number: 1J0121087B
• Manufacturer: NRF

• Colour: black
• Fitting Position: Lower
• Weight [kg]: 0.082
• Supplementary Article/Supplementary Info: with quick coupling
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 1J0121100
• Fitting Position: Lower
• Supplementary Article/Supplementary Info: without gasket/seal
• Weight [g]: 85
• Supplementary Article/Info 2: without thermostat
• Name: IM 90361
• Manufacturer: ORIGINAL IMPERIUM

• Colour: black
• Fitting Position: Lower
• Supplementary Article/Supplementary Info: with quick coupling
• Manufacturer: SWAG
• Name: SW 30 94 6154

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 1J0121087C
• Material: Plastic
• Supplementary Article/Supplementary Info: without gasket/seal
• Weight [g]: 49
• Supplementary Article/Info 2: without thermostat
• Name: Jahutusvedeliku flants
• Manufacturer: IMP

• for OE number: 3B0122291B
• Supplementary Article/Supplementary Info: with seal
• Weight [g]: 29
• Supplementary Article/Info 2: without thermostat
• Name: IM 90582
• Manufacturer: ORIGINAL IMPERIUM

• Material: Plastic
• Weight [kg]: 0.05
• Required quantity: 1
• General Information: pipe union
• Manufacturer: VIKA

• Fitting Position: Cylinder Head
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: MAX

• Weight [kg]: 0.046
• for OE number: 1J0 121 087 C
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.