• Shape: O-Ring, round
• Inner Diameter [mm]: 55
• Outer Diameter [mm]: 61
• Thickness [mm]: 3
• Material: MVQ (silicone rubber)
• Name: TIHEND, EGR-KLAPP
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Pipe at manifold
• Material: Stainless Steel
• Name: TIHEND, EGR-KLAPP
• Manufacturer: FIS

• Fitting Position: Lower
• Gasket Design: Fibre Composite
• Chemical Properties: Asbestos Free
• Mounting Type: Flange mounting
• Number of flange connections: 2
• Name: TIHEND, EGR-KLAPP
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) from: 1U-V-020000
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thickness [mm]: 1
• Width [mm]: 46
• Length [mm]: 76
• Name: TIHEND, EGR-KLAPP
• Manufacturer: AJU

• Model Year from: 1997
• Weight [kg]: 0.003
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 41
• Packaging length [cm]: 4.1
• Packaging width [cm]: 4.1
• Packaging height [cm]: 0.3
• Manufacturer: FEBEST

• Engine Code: ALH, AGR
• Block Separation:
• Vehicle Identification Number (VIN) from: 1U-V-020000
• Shape: round
• Material: Rubber
• Name: Tihend, EGR-klapp
• Manufacturer: MAX
• Lisainfo: 70-0130
• Additional information: 70-0130

• Inner Diameter [mm]: 32
• Name: TIHEND, EGR-KLAPP
• Manufacturer: FIS

• Weight [kg]: 0.01
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Gasket Design: Steel
• Mounting Type: Flange mounting
• Flange Hole Diameter [mm]: 25
• Number of flange connections: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Inner Diameter [mm]: 32
• Manufacturer: ELRING
• Lisainfo: 729.970 ELR
• Additional information: 729.970 ELR

Inner Diameter [mm]: 32

• Weight [kg]: 0.007
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AGR, ALH
• Fitting Position: Pipe at manifold
• Block Separation:
• Required quantity: 3
• Inner Diameter [mm]: 22
• Manufacturer: ELRING

• Vehicle Identification Number (VIN) from: 1U-1-000 001
• Plug Type: Blade Terminal Sleeve
• Plug housing design: Plug sleeve housing
• Number of pins: 2
• Manufacturer Restriction: Mercedes-Benz, VAG, Scania
• Socket Width [mm]: 2.8
• Cable Cross Section [mm²]: 0.75
• Protection Type (IP Code): IP X7
• Cable Length [mm]: 500
• for article number: 82710249, 82710380, 82710396
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals, with hose
• Supplementary Article/Info 2: with pipe
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, keskne elektrissteem
• Manufacturer: HBE
• Lisainfo: 50390266
• Additional information: 50390266

• Supplementary Article/Supplementary Info: without gasket/seal
• Operating Mode: Pneumatic
• Manufacturer: KAMOKA
• Additional information: F19024
• Lisainfo: F19024

• Vehicle Identification Number (VIN) to: 1U-Y-999 999
• Manufacturer Restriction: VAG
• Number of pins: 2
• Cable Length [mm]: 500
• Cable Cross Section [mm²]: 1
• Contact surface: Tin-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, EGR-klapp
• Manufacturer: HBE

• Weight [kg]: 0.04
• Manufacturer: METALCAUCHO

• Fitting Position: Pipe at manifold
• Manufacturer: WAHLER

• Voltage [V]: 12
• Number of pins: 2
• Operating Mode: Electric
• Valve type: Solenoid Valve
• for OE number: 1J0906283B, 1J0906283C, 1K0906283A, 1K0906283
• Weight [kg]: 1.1
• Packaging length [cm]: 21
• Packaging width [cm]: 21
• Packaging height [cm]: 17
• Manufacturer: AKSDASIS

Manufacturer: MAGNETI MARELLI

• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Model Year from: 2000
• Model Year to: 2010
• New Part:
• Used part return not required:
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Model Year from: 1998
• Model Year to: 2010
• New Part:
• Used part return not required:
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Supplementary Article/Supplementary Info: without EGR cooler, with gaskets/seals
• Operating Mode: Pneumatic
• Fabrication Number: EGR-AU-003
• Manufacturer: NTY
• Name: NTY EGR-AU-003

• Name: EGR-klapp
• Manufacturer: MAG
• Lisainfo: EV080C
• Additional information: EV080C

• Construction Year to: 03.2003
• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: JP GROUP
• Lisainfo: EGR Valve
• Additional information: EGR Valve

• Construction Year from: 03.2003
• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: JP GROUP
• Lisainfo: EGR Valve
• Additional information: EGR Valve

• Operating Mode: Pneumatic
• Fabrication Number: EGR-SK-003
• Manufacturer: NTY

• Operating Mode: Pneumatic
• Manufacturer: JAPKO

• Vehicle Identification Number (VIN) from: 1U-3-768638, 1U-38696293, 1U-3A016278
• Operating Mode: Pneumatic
• Regulator: with vacuum governor
• New Part:
• Used part return not required:
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Gaskets/Seals/Seal Rings: 3
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for article number: 555083
• Manufacturer: KAMOKA

• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with seal
• Packaging length [cm]: 19
• Packaging width [cm]: 18
• Packaging height [cm]: 18
• Weight [kg]: 0.78
• for OE number: 038131501AR, 038131501M
• Valve type: Diaphragm Valve
• Manufacturer: AKSDASIS

• Construction Year from: 03.2003
• Vehicle Identification Number (VIN) from: 1U3768638
• Valve type: Diaphragm Valve
• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with seal
• Name: EGR-KLAPP
• Manufacturer: MAX

• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.58
• Required quantity: 1
• General Information: EGR Valve
• Manufacturer: VIKA

• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Packaging length [cm]: 19
• Packaging width [cm]: 19
• Packaging height [cm]: 18
• for OE number: 038131501E, 045131501C, 045131501L
• Valve type: Diaphragm Valve
• Weight [kg]: 0.74
• Manufacturer: AKSDASIS

• Construction Year to: 02.2003
• Quality class: PJ
• Name: Exhaust gas recirculation valve

• Construction Year from: 03.2003
• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
• Name: DRM 211110

• Construction Year from: 03.2003
• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Quality class: PJ
• Name: Exhaust gas recirculation valve

• Construction Year from: 03.2003
• Supplementary Article/Supplementary Info: without EGR cooler
• Name: EGR-klapp
• Manufacturer: NIS

Technical Information: FIRST FIT - Includes gaskets and O-rings when needed

• Construction Year from: 03.2003
• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: EGR-klapp
• Manufacturer: NRF

• Construction Year from: 03.2003
• Vehicle Identification Number (VIN) from: 1U3768638
• Name: EGR-KLAPP
• Manufacturer: MAG

• Construction Year to: 02.2003
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: EGR-klapp
• Manufacturer: NIS
• Lisainfo: SEAT AROSA (6H) (97-) 1.4 TDi
• Additional information: SEAT AROSA (6H) (97-) 1.4 TDi

Technical Information: FIRST FIT - Includes gaskets and O-rings when needed

• Operating Mode: Pneumatic
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 0.7
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 14SKV082

• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: without gasket/seal
• Quality: OE EQUIVALENT
• Name: EGR-klapp
• Manufacturer: MD

• for OE number: 038 131 501 E
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Name: EGR-KLAPP
• Manufacturer: MAG

• Operating Mode: Pneumatic
• Name: EGR-KLAPP
• Manufacturer: JPA

• Construction Year to: 02.2003
• Cooling Type: Air cooled
• Operating Mode: Pneumatic
• for OE number: 045131501L
• Supplementary Article/Supplementary Info: with gaskets/seals

• Construction Year from: 03.2003
• Manufacturer: DELPHI
• Name: DE EG10469-12B1

• Construction Year to: 02.2003
• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: WAHLER ZAWORY EGR

• Construction Year from: 03.2003
• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: WAHLER ZAWORY EGR

• Construction Year to: 03.2003
• Weight [kg]: 0.58
• for OE number: 045 131 501 L
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 03.2003
• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with seal
• Warranty: 5 years warranty
• Name: HU 138475
• Manufacturer: HUECO / HITACHI

• New Part:
• Construction Year from: 03.2003
• Housing Type: Aluminium Housing
• Operating Mode: Pneumatic-hydraulic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: EGR-KLAPP
• Manufacturer: TRI

• Operating Mode: Pneumatic
• Alternatively:
• Supplementary Article/Supplementary Info: without gaskets/seals
• Number of mounting bores: 3
• Weight [kg]: 0.8
• Alternative Repair Kit: 555087
• Manufacturer: ERA

• Construction Year to: 03.2003
• Weight [kg]: 0.58
• Supplementary Article/Supplementary Info: with gaskets/seals
• for OE number: 045 131 501 L
• Name: SW 30 10 7783
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 03.2003
• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of mounting bores: 3
• Net weight [kg]: 0.6
• Name: EGR-KLAPP
• Manufacturer: ELS

• New Part:
• Construction Year to: 02.2003
• Housing Type: Aluminium Housing
• Operating Mode: Pneumatic
• Cooling Type: Air cooled
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: EGR-KLAPP
• Manufacturer: TRI

• Construction Year to: 02.2003
• Supplementary Article/Supplementary Info: with gaskets/seals
• Operating Mode: Vacuum-controlled
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6NU010171311

• Construction Year to: 03.2003
• Vehicle Identification Number (VIN) from: 1U-V-020 000
• Engine Code: AGR, ALH
• Block Separation:
• Valve type: Diaphragm Valve
• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: PIERBURG

• Construction Year from: 03.2003
• Engine Code: AGR, ALH
• Block Separation:
• Valve type: Diaphragm Valve
• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: PIERBURG

• Inner Diameter [mm]: 54.5
• Thickness [mm]: 3
• Material: FPM (fluoride rubber)

• Inner Diameter [mm]: 54.5
• Thickness [mm]: 3
• Material: FPM (fluoride rubber)
• Alternatively:

• Engine Code: ALH, AGR
• Inner Diameter [mm]: 61
• Thickness [mm]: 3
• Material: NBR (nitrile butadiene rubber)
• Shape: O-Ring
• Fitting Position: EGR valve at manifold
• Alternatively:

• Engine Code: ALH, AGR
• Inner Diameter [mm]: 61
• Thickness [mm]: 3
• Material: NBR (nitrile butadiene rubber)
• Shape: O-Ring
• Fitting Position: EGR valve at manifold