Tootekategooriad
Filtrid Pidurid vedrustus/alusvanker Roolisüsteem Jahutus/kliima Elektrisüsteem Veokonks/lisad Jõuülekanne Väljalaskesüsteem Kere Süüte-/eelsüütesüsteem Mootor Klaasid/klaasipuhastus Valgustus Kütus Kabiinivarustus HooldusToode
Kirjeldus
Laoseis
Hind
(km-ga)
- Kogus pakendis: 25
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 22
- Thickness [mm]: 2
- Material: Copper
- Shape: C Shape
- DIN/ISO: 7603
-
Alternative Repair Kit: 017.736,
036.400, 505.550, 505.540 - Tootja: ELRING
- Lisainfo: 813.052 ELRING
- Kogus pakendis: 10
- Material: Copper
- Outer Diameter [mm]: 22
- Inner Diameter [mm]: 16
- Thickness [mm]: 2
- Shape: C Shape
- Tootja: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 22
- Material: Copper
- Thickness [mm]: 2
- Tootja: FAST
- Kogus pakendis: 25
- Thickness [mm]: 2
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 22
- Material: Copper
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Kogus pakendis: 10
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 24
- Thickness [mm]: 2
-
Sealing lip material: NBR
(nitrile butadiene rubber) - Gasket Design: Metal Elastomer Gasket
- Tootja: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Kogus pakendis: 25
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 24
- Thickness [mm]: 1.5
- Gasket Design: Metal Elastomer Gasket
-
Material: NBR
(nitrile butadiene rubber) - Shape: A Shape
-
Alternative Repair Kit: 036.400,
505.550, 505.540 - Tootja: ELRING
- Kogus pakendis: 25
- Fitting Position: Oil Sump
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Thickness [mm]: 1.5
- Inner Diameter [mm]: 16.7
- Outer Diameter [mm]: 24
-
Material: Rubber/
Metal - Weight [kg]: 0.02
-
Nimetus: RONGASTIHEND,
OLI RAVOOLUKRUVI - Tootja: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Mootorikood: R9M 414
-
Nimetus: RONGASTIHEND,
OLI RAVOOLUKRUVI - Tootja: AJU
- Lisainfo: AJU18001200
- Kogus pakendis: 5
- Bolt Head-/Nut Design: Inner rectangle
- Thread Size: M 16
- Thread Pitch [mm]: 1.5
- Tootja: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Length [mm]: 19
-
Thread Size: M16 x 1,
50 - Tootja: 3RG
-
Thread Size: M16x1,
5 - Length [mm]: 12
-
Additionally required articles (article numbers): 542.470.100,
968.330.100 - Nimetus: SULGURKRUVI
- Tootja: FIS
-
Thread Size: M16x1,
5 - Length [mm]: 12
- Supplementary Article/Info 2: with seal ring
- Alternatively:
- Nimetus: SULGURKRUVI
- Tootja: FIS
- Inner Diameter [mm]: 16.7
-
Material: Rubber/
Metal - Outer Diameter [mm]: 24
- Thickness [mm]: 1.5
- Packing Type: Blister Pack
- Tootja: CORTECO USZCZELKI
- Thread Size: M16
- Length [mm]: 15
- Tootja: BGA
- Inner Diameter [mm]: 16.3
- Material: Copper
- Outer Diameter [mm]: 22
- Thickness [mm]: 2
- Packing Type: Blister Pack
- Tootja: CORTECO USZCZELKI
- Kogus pakendis: 5
- for OE number: 016393
-
Article number of recommended accessories: V25-
0583 - Length [mm]: 12
-
External Thread [mm]: M16 x 1,
5 - Bolt Head-/Nut Design: Inner rectangle
- Supplementary Article/Info 2: without seal ring
- Thread Pitch [mm]: 1.5
- Fitting Position: engine sided
-
Thread Size: M16 x 1,
5 - Required quantity: 1
- Thread Length [mm]: 12
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Length [mm]: 17
- Outer Diameter [mm]: 22
-
External Thread Size: M16 x 1,
5 - Thread Length [mm]: 13
- Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 17
- Weight [kg]: 0.02
- Supplementary Article/Info 2: without seal ring
-
Nimetus: SULGURKRUVI,
OLIVANN - Tootja: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 17
- Outer Diameter [mm]: 22
-
External Thread Size: M16 x 1,
5 - Thread Length [mm]: 13
- Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 17
- Weight [kg]: 0.02
- Supplementary Article/Info 2: without seal ring
-
Nimetus: SULGURKRUVI,
OLIVANN - Tootja: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 17
- Outer Diameter [mm]: 22
-
External Thread Size: M16 x 1,
5 - Thread Length [mm]: 13
- Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 17
- Weight [kg]: 0.02
- Supplementary Article/Info 2: without seal ring
- Tootja: ENERGY
-
Thread Size: M16x1,
5x12 - Bolt Head-/Nut Design: Inner rectangle
- Alternative Repair Kit: 434.940
- Supplementary Article/Info 2: without seal ring
-
Nimetus: Sulgurkruvi,
olivann - Tootja: ELR
-
Thread Size: M16x1,
5x12 - Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- Supplementary Article/Info 2: with seal ring
-
Nimetus: Sulgurkruvi,
olivann - Tootja: DRM
- Supplementary Article/Info 2: with seal ring
-
Thread Size: M 16 x 1,
50 x 12 - Length [mm]: 15.5
- Packing Type: Blister Pack
- Spanner Size: 8 x 8
-
Nimetus: SULGURKRUVI,
OLIVANN - Tootja: COT
-
Thread Size: M16x1,
5x12 - Bolt Head-/Nut Design: Inner rectangle
-
Version: incl. 834.823,
incl. 813.052 - Supplementary Article/Info 2: with seal ring
- Tootja: ELRING
- Length [mm]: 14
-
External Thread Size: M16 x 1,
5 - Thread Length [mm]: 12
- Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- Material: Steel
-
Surface: Zinc-
coated - Weight [kg]: 0.04
- Supplementary Article/Info 2: with seal ring
- Tootja: FEBI
- Lisainfo: 101250 FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Kogus pakendis: 5
- Required quantity: 1
- Thread Length [mm]: 12
- Thread Pitch [mm]: 1.5
-
External Thread [mm]: M16 x 1,
5 -
Surface: Zinc-
coated - Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- Supplementary Article/Info 2: with seal ring
- Fitting Position: engine sided
-
Thread Size: M16 x 1,
5 - Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Length [mm]: 14
-
External Thread Size: M16 x 1,
5 - Thread Length [mm]: 12
- Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- Material: Steel
-
Surface: Zinc-
coated - Weight [kg]: 0.04
- Supplementary Article/Info 2: with seal ring
- Nimetus: SW 60 10 1250
- Tootja: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Kogus pakendis: 10
- Inner Diameter [mm]: 16
- Thickness [mm]: 2
- Shape: C Shape
- Outer Diameter [mm]: 22
- Alternatively:
- Nimetus: Rongastihend
- Tootja: FIS
- Kogus pakendis: 5
- Tootja: DRM
Nimetus: USZCZELKA RUBY SPUSTU OLEJU 12X24X1.5 MET-GUM 5SZT.
- Length [mm]: 19
-
Thread Size: M16 x 1,
50 - Tootja: 3RG
- Kogus pakendis: 10
- Inner Diameter [mm]: 16.7
- Outer Diameter [mm]: 24
- Thickness [mm]: 1.5
- Shape: A Shape
- Gasket Design: Metal Elastomer Gasket
- Alternatively:
- Kogus pakendis: 100
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 22
- Thickness [mm]: 2
- Shape: C Shape
- Tootja: FISCHER AUTOMOTIVE
- Kogus pakendis: 100
- Inner Diameter [mm]: 16.7
- Outer Diameter [mm]: 24
- Thickness [mm]: 1.5
- Shape: A Shape
- Gasket Design: Metal Elastomer Gasket
- Tootja: FISCHER
Laki Auto universaaltooted
TecDoc sõidukite kataloog
TecDoc veokite kataloog