Tootekategooriad
Filtrid Pidurid vedrustus/alusvanker Roolisüsteem Jahutus/kliima Elektrisüsteem Veokonks/lisad Jõuülekanne Väljalaskesüsteem Kere Süüte-/eelsüütesüsteem Mootor Klaasid/klaasipuhastus Valgustus Kütus Kabiinivarustus HooldusToode
Kirjeldus
Laoseis
Hind
(km-ga)
- Mootorikood: K9K 646
- Käigukasti ID: TL4
- Outer Diameter [mm]: 230
- Number of Teeth: 21
-
Multi-piece: two-
piece - Supplementary Article/Supplementary Info: with synthetic grease
- Weight [kg]: 4.794
- Observe service information:
- Tootja: BLUEPRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Supplementary Article/Info 2: with clutch disc
- Diameter [mm]: 230
- Kvaliteediklass: PJ
- Nimetus: Clutch kit
Supplementary Article/Supplementary Info: without central slave cylinder, with clutch pressure plate
- Ehitusaasta kuni: 11.2018
- Mootorikood: K9K.6.46
- Kastitüüp: TL4
- Käigukasti liik: Käigukast 6 käiku
- Number of Teeth: 21
-
Hub Profile: 24,
81 x 21, 28 -
Extention Force [N]: 5,
500 - Outer Diameter [mm]: 228
- Kvaliteediklass: PJ
- Nimetus: Clutch kit
Supplementary Article/Supplementary Info: without central slave cylinder, with clutch pressure plate Supplementary Article/Info 2: with clutch disc, Special tools for mounting not necessary
-
Mootorikood: K9K 646,
K9K 648 - Käigukasti liik: Käigukast 6 käiku
- Diameter [mm]: 230
-
Hub Profile: 19,
2x22, 2- 21N - Number of Teeth: 21
- only available in set:
- Supplementary Article/Info 2: without clutch release bearing
- Observe service information:
- Tootja: SACHS
- Nimetus: SHS 3000950538
SVHC: No information available, please contact the manufacturer!
-
Mootorikood: K9K646,
K9K648, K9K674, K9K676 - Käigukasti liik: Käigukast 6 käiku
- New Part:
- Clutch Pressure Plate Outer Diameter [mm]: 228
- Number of Teeth: 21
-
Hub Profile: 24,
81 x 21, 28 - Clutch: for vehicles with push type clutch
- Weight [kg]: 4.29
- Tootja: VALEO
- Nimetus: VA 828033
Supplementary Article/Info 2: without clutch release bearing, Special tools for mounting not necessary General Information: Valeo Clutch Kit with hydraulic bearing also available
-
Kastitüüp: Manual -
TL4 -
Engine Features/Arrangement: for engines with dual-
mass flywheel - Supplementary Article/Info 2: without clutch release bearing
- Number of Teeth: 21
- Outer Diameter [mm]: 230
-
Multi-piece: two-
piece -
Tootja: EXEDY/
DAIKIN
- Mootorikood: K9K 646
- Käigukasti ID: TL4
- Outer Diameter [mm]: 230
- Number of Teeth: 21
-
Multi-piece: three-
piece -
Supplementary Article/Supplementary Info: with central slave cylinder,
with synthetic grease - Weight [kg]: 4.976
- Observe service information:
- Tootja: BLUEPRINT
- Lisainfo: ADR163049 BLUEPRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Mootorikood: K9K 646,
K9K 648 - Diameter [mm]: 225
- SVHC: No SVHC present!
- Tootja: LUK
- Nimetus: LU 623354409
-
Mootorikood: K9K 646,
K9K 648 - Käigukasti liik: Käigukast 6 käiku
- Diameter [mm]: 230
- Number of Teeth: 21
- Alternative Repair Kit: 3000 950 538
- Nimetus: SHS 3000990490
- Tootja: SACHS
SVHC: No information available, please contact the manufacturer!
-
Mootorikood: K9K 646,
K9K 648 - Kastitüüp: TL4
- Käigukasti liik: Käigukast 6 käiku
- Plokieraldus:
- Ehitusaasta kuni: 11.2018
- New Part:
- Clutch Pressure Plate Outer Diameter [mm]: 228
- Number of Teeth: 21
-
Hub Profile: 24,
8 x 21, 3 - Supplementary Article/Supplementary Info: with central slave cylinder
- Clutch: for vehicles with push type clutch
- Weight [kg]: 4.62
- Tootja: VALEO
- Nimetus: VA 834276
- Ehitusaasta kuni: 07.2018
- Kastitüüp: TL4
- Diameter [mm]: 230
- Number of Teeth: 21
- Tootja: AISIN
-
Mootorikood: K9K 646,
K9K 648 - Diameter [mm]: 225
- Supplementary Article/Supplementary Info: with central slave cylinder
- SVHC: No SVHC present!
- Tootja: LUK
Tootja: KAMOKA
- Number of Teeth: 21
-
Fabrication Number: NZS-
RE- 002 - Tootja: NTY
-
Nimetus: NTY NZS-
RE- 002
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Mootorikood: K9K.6.46
- Kastitüüp: TL4
- Käigukasti liik: Käigukast 6 käiku
- Number of Teeth: 21
-
Hub Profile: 21,
2 x 24, 8 -
Supplementary Article/Info 2: with flywheel,
with clutch disc, with screw set -
Extention Force [N]: 5,
500 - Outer Diameter [mm]: 228
- Kvaliteediklass: PJ
- Nimetus: Clutch kit
Supplementary Article/Supplementary Info: without central slave cylinder, with clutch pressure plate Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Mootorikood: K9K 646
- Kastitüüp: TL4
- Käigukasti liik: Käigukast 6 käiku
- New Part:
- Tightening Torque [Nm]: 65
- Clutch Pressure Plate Outer Diameter [mm]: 228
- Number of Teeth: 21
-
Hub Profile: 21,
2 x 24, 8 - Weight [kg]: 15.76
- Tootja: VALEO
- Nimetus: VA 835077
Supplementary Article/Supplementary Info: with single-mass flywheel, without central slave cylinder Clutch: Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch Supplementary Article/Info 2: with screw set, Special tools for mounting not necessary
- Ehitusaasta kuni: 08.2018
- Mootorikood: K9K 646
- Kastitüüp: TL4
- Käigukasti liik: Käigukast 6 käiku
- New Part:
- Tightening Torque [Nm]: 65
- Clutch Pressure Plate Outer Diameter [mm]: 228
- Number of Teeth: 21
- Weight [kg]: 16.12
- Tootja: VALEO
- Nimetus: VA 845077
Supplementary Article/Supplementary Info: with single-mass flywheel, with central slave cylinder Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Mootorikood: K9K 646
- Käigukasti liik: Käigukast 6 käiku
- Kastitüüp: TL4
- New Part:
- only to be used within set:
- Number of mounting bores: 7
- Tightening Torque [Nm]: 65
- Clutch Pressure Plate Outer Diameter [mm]: 235
- Number of Teeth: 21
- Number of mounting bores at central slave cylinder: 2
- Bore Diameter [mm]: 30
- Material: Plastic
- Weight [kg]: 19
- Tootja: VALEO
- Nimetus: VA 837432
Supplementary Article/Supplementary Info: with dual-mass flywheel, with central slave cylinder Supplementary Article/Info 2: with screw set, with lock screw set, without sensor
- Ehitusaasta kuni: 07.2018
- Käigukastinumber: TL4
-
Specification: SMF conversion,
with releaser - Supplementary Article/Supplementary Info: with central slave cylinder
-
Supplementary Article/Info 2: with screw set,
with flywheel - Diameter [mm]: 230
- Number of Teeth: 21
- Tootja: AISIN
-
Mootorikood: K9K 646,
K9K 648 - Käigukasti liik: Käigukast 6 käiku
- Diameter [mm]: 230
- Number of Teeth: 21
-
Mounting Type: not pre-
mounted - Supplementary Article/Info 2: with clutch disc
- Nimetus: SHS 2290601143
- Tootja: SACHS
Supplementary Article/Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws SVHC: No information available, please contact the manufacturer!
-
Mootorikood: K9K 646,
K9K 648 - Supplementary Article/Supplementary Info: with central slave cylinder
-
Supplementary Article/Info 2: with flywheel,
with screw set - Number of mounting bores: 7
- SVHC: No SVHC present!
- Tootja: LUK
- Nimetus: LU 600019700
-
Transmission Type: Dual-
Clutch Transmission - Clutch Type: for dry clutch
-
Supplementary Article/Info 2: with clutch release bearing,
with release fork - Observe broschure:
- SVHC: No SVHC present!
- Tootja: LUK
Laki Auto universaaltooted
TecDoc sõidukite kataloog
TecDoc veokite kataloog