• Installatsiooni pool: Esisild
• Manufacturer Restriction: LUCAS, TRW
• for piston diameter [mm]: 48
• Net weight [kg]: 0.03
• Lisainfo: 48

• Installatsiooni pool: Tagasild
• Net weight [kg]: 0.04
• Nimetus: REMONDIKOMPLEKT,PIDURISADUL
• Tootja: NK
• Lisainfo: 30

• Fitting Position: Rear Axle
• Diameter [mm]: 30
• Brake System: BENDIX/BOSCH
• Version: BASIC KIT
• Nimetus: SE D4-3977
• Tootja: AUTOFREN SEINSA

• Installatsiooni pool: Esisild
• Ehitusaasta kuni: 07.1987
• Piduriketta liik: täis
• Pidurisüsteem: TRW
• pidurikettajämedusele (mm): 10
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Diameter [mm]: 48
• Quantity per axle: 2
• Nimetus: Remondikomplekt,Pidurisadul
• Tootja: QBK

• Installatsiooni pool: Esisild
• Ehitusaasta kuni: 07.1987
• Piduriketta liik: õhutusega
• Pidurisüsteem: Bendix
• pidurikettajämedusele (mm): 20,4
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Diameter [mm]: 48
• Quantity per axle: 2
• Nimetus: Remondikomplekt,Pidurisadul
• Tootja: QBK

• Installatsiooni pool: Tagasild
• Ehitusaasta kuni: 07.1987
• Pidurisüsteem: Bendix
• pidurikettajämedusele (mm): 8
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Diameter [mm]: 30
• Quantity per axle: 2
• Nimetus: Remondikomplekt,Pidurisadul
• Tootja: QBK

• Fitting Position: Front Axle
• Diameter [mm]: 48
• Brake System: ATE-LUCAS
• for OE number: 95607100
• Version: MAIN PARTS
• Nimetus: REMONDIKOMPLEKT,PIDURISADUL
• Tootja: AUT

• Diameter [mm]: 48
• Brake System: ATE
• Fitting Position: Front Axle
• for OE number: 7074026
• Tootja: AUTOFREN SEINSA
• Nimetus: SE D4-040

• Fitting Position: Front Axle
• Manufacturer Restriction: TRW, ATE
• Weight [kg]: 0.028
• Brake System: Lucas/Trw
• Packaging length [cm]: 6
• Packaging width [cm]: 6
• Packaging height [cm]: 3
• Tootja: FEBEST

• Installatsiooni pool: Esisild
• Manufacturer Restriction: BENDIX
• Net weight [kg]: 0.03
• Nimetus: REMONDIKOMPLEKT,PIDURISADUL
• Tootja: NK
• Lisainfo: 48

• Täiskomplekt:
• Fitting Position: Front Axle
• Diameter [mm]: 48
• Brake System: ATE-LUCAS
• Tootja: AUTOFREN SEINSA
• Nimetus: SE D4-517

• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Manufacturer Restriction: ATE
• for piston diameter [mm]: 48
• Tootja: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Diameter [mm]: 48
• Brake System: BENDIX
• Nimetus: REMONDIKOMPLEKT,PIDURISADUL
• Tootja: AUT

• Installatsiooni pool: Esisild
• Ehitusaasta kuni: 07.1987
• Piduriketta liik: õhutusega
• Pidurisüsteem: ATE
• pidurikettajämedusele (mm): 20
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Diameter [mm]: 48
• Quantity per axle: 2
• Supplementary Article/Supplementary Info: with piston
• Nimetus: Remondikomplekt,Pidurisadul
• Tootja: QBK

• Installatsiooni pool: Tagasild
• Ehitusaasta kuni: 07.1987
• Pidurisüsteem: Bendix
• pidurikettajämedusele (mm): 8
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Diameter [mm]: 30
• Quantity per axle: 2
• Supplementary Article/Supplementary Info: with piston
• Nimetus: Remondikomplekt,Pidurisadul
• Tootja: QBK

• Installatsiooni pool: Esisild
• Diameter [mm]: 48
• Brake System: ATE
• Full Set:
• Nimetus: REMONDIKOMPLEKT,PIDURISADUL
• Tootja: AUT

• Fitting Position: Rear Axle
• Diameter [mm]: 30
• Brake System: BENDIX-BOSCH
• Tootja: AUTOFREN SEINSA
• Nimetus: SE D4-107

• Installatsiooni pool: Esisild
• Ehitusaasta kuni: 07.1987
• Piduriketta liik: täis
• Pidurisüsteem: TRW
• pidurikettajämedusele (mm): 10
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Diameter [mm]: 48
• Quantity per axle: 2
• Supplementary Article/Supplementary Info: with piston
• Nimetus: Remondikomplekt,Pidurisadul
• Tootja: QBK

• Fitting Position: Front Axle
• Diameter [mm]: 48
• Brake System: LUCAS
• Full Set:
• for OE number: 440083
• Nimetus: REMONDIKOMPLEKT,PIDURISADUL
• Tootja: AUT

• Installatsiooni pool: Esisild
• Ehitusaasta kuni: 07.1987
• Piduriketta liik: õhutusega
• Pidurisüsteem: Bendix
• pidurikettajämedusele (mm): 20,4
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Diameter [mm]: 48
• Quantity per axle: 2
• Supplementary Article/Supplementary Info: with piston
• Nimetus: Remondikomplekt,Pidurisadul
• Tootja: QBK

• Fitting Position: Front Axle
• Diameter [mm]: 48
• Brake System: BENDIX
• Full Set:
• for OE number: 4400K1
• Nimetus: REMONDIKOMPLEKT,PIDURISADUL
• Tootja: AUT

• Fitting Position: Rear Axle
• Full Set:
• Diameter [mm]: 30
• Nimetus: REMONDIKOMPLEKT,PIDURISADUL
• Tootja: AUT

• Installatsiooni pool: Esisild
• Diameter [mm]: 48
• Brake System: ATE
• Full Set:
• Version: PISTON KIT+GUIDEPINS
• Tootja: AUTOFREN SEINSA

• Fitting Position: Rear Axle
• Diameter [mm]: 30
• Full Set:
• Brake System: BENDIX
• Version: WITH MECHANISM
• Nimetus: SE D4-1625K
• Tootja: AUTOFREN SEINSA

• Ehitusaasta kuni: 07.1987
• Fitting Position: Rear Axle Left
• Brake System: BENDIX
• Brake Caliper Type: Brake Caliper (1 piston)
• Used part return not required:
• New Part:
• Piston Diameter [mm]: 30
• paired article number: 131-04-244
• for brake disc thickness [mm]: 8
• Assy./disassy. by qualified personnel required!:
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Ehitusaasta kuni: 07.1987
• Fitting Position: Rear Axle Right
• Brake System: BENDIX
• Brake Caliper Type: Brake Caliper (1 piston)
• Used part return not required:
• New Part:
• Piston Diameter [mm]: 30
• paired article number: 131-04-243
• for brake disc thickness [mm]: 8
• Assy./disassy. by qualified personnel required!:
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Ehitusaasta kuni: 07.1987
• Fitting Position: Rear Axle Left
• Brake Caliper Piston Diameter [mm]: 30
• Brake Disc Type: solid
• for brake disc diameter [mm]: 247
• for brake disc thickness [mm]: 8
• Manufacturer Restriction: BENDIX / BOSCH

Brake Caliper Type: Brake Caliper with integrated parking brake, Brake Caliper (1 piston)

• Ehitusaasta kuni: 07.1987
• Fitting Position: Rear Axle Right
• Brake Caliper Piston Diameter [mm]: 30
• Brake Disc Type: solid
• for brake disc diameter [mm]: 247
• for brake disc thickness [mm]: 8
• Manufacturer Restriction: BENDIX / BOSCH

Brake Caliper Type: Brake Caliper with integrated parking brake, Brake Caliper (1 piston)

• Installatsiooni pool: Tagasild, paremal
• Tootja piirang: BENDIX
• Läbimõõt 1 (mm): 30
• Nimetus: CFD BA0626
• Tootja: DACO

Pidurisadulateostus: Pidurisadul (1 kolb), Pidurisadul koos integr. seisupiduriga

• Installatsiooni pool: Tagasild, vasakul
• Tootja piirang: BENDIX
• Läbimõõt 1 (mm): 30
• Nimetus: CFD BA0625
• Tootja: DACO

Pidurisadulateostus: Pidurisadul (1 kolb), Pidurisadul koos integr. seisupiduriga

• Installatsiooni pool: Tagasild paremal
• paaris tootenumbrid: HZT-PE-010
• Seerianumber: HZT-PE-011
• Tootja: NTY

• Installatsiooni pool: Tagasild vasakul
• paaris tootenumbrid: HZT-PE-011
• Kolvi läbimõõt [mm]: 30
• Seerianumber: HZT-PE-010
• Tootja: NTY

Pidurisadulateostus: Pidurisadul (1 kolb), Pidurisadul koos integr. seisupiduriga

• Ehitusaasta kuni: 07.1987
• Installatsiooni pool: esisild paremal
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Pidurisüsteem: BENDIX
• Garantii: 3 aastat garantii
• Uus osa:
• Vana detaili tagastus mittevajalik:
• paaris tootenumbrid: 42SKV111
• Kaal (kg): 2,45
• Pidurikettajämedus [mm]: 20
• Pidurisadula kolvi läbimõõt [mm]: 48
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY
• Nimetus: CE 42SKV112

• Ehitusaasta kuni: 07.1987
• Installatsiooni pool: esisild vasakul
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Pidurisüsteem: BENDIX
• Garantii: 3 aastat garantii
• Uus osa:
• Vana detaili tagastus mittevajalik:
• paaris tootenumbrid: 42SKV112
• Kaal (kg): 2,45
• Pidurikettajämedus [mm]: 20
• Pidurisadula kolvi läbimõõt [mm]: 48
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Nimetus: CE 42SKV111
• Tootja: ESEN SKV

• Ehitusaasta kuni: 07.1987
• Installatsiooni pool: Tagasild vasakul
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Pidurisüsteem: BENDIX
• Garantii: 3 aastat garantii
• Uus osa:
• Kinnitusaukude vahe (mm): 82
• Vana detaili tagastus mittevajalik:
• paaris tootenumbrid: 23SKV484
• Kaal (kg): 2,2
• Pidurikettajämedus [mm]: 8
• Pidurisadula kolvi läbimõõt [mm]: 30
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY
• Nimetus: CE 23SKV483
• Lisainfo: CE 23SKV483

• Ehitusaasta kuni: 07.1987
• Installatsiooni pool: Tagasild paremal
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Pidurisüsteem: BENDIX
• Garantii: 3 aastat garantii
• Uus osa:
• Kinnitusaukude vahe (mm): 82
• Vana detaili tagastus mittevajalik:
• paaris tootenumbrid: 23SKV483
• Kaal (kg): 2,2
• Pidurikettajämedus [mm]: 8
• Pidurisadula kolvi läbimõõt [mm]: 30
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY
• Lisainfo: CE 23SKV484

• Ehitusaasta kuni: 07.1987
• Installatsiooni pool: Tagasild paremal
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Pidurisüsteem: BENDIX
• Uus osa:
• Kinnitusaukude vahe (mm): 82
• Vana detaili tagastus mittevajalik:
• Kaal (kg): 2,2
• Pidurikettajämedus [mm]: 8
• Pidurisadula kolvi läbimõõt [mm]: 30
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: ENERGY

• Ehitusaasta kuni: 07.1987
• Installatsiooni pool: Tagasild vasakul
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Pidurisüsteem: BENDIX
• Uus osa:
• Kinnitusaukude vahe (mm): 82
• Vana detaili tagastus mittevajalik:
• paaris tootenumbrid: ZH0335
• Kaal (kg): 2,2
• Pidurikettajämedus [mm]: 8
• Pidurisadula kolvi läbimõõt [mm]: 30
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: ENERGY

• Installatsiooni pool: Esisild
• paired article number: 83-0531
• Fitting Position: Front Axle Left, in front of axle
• Manufacturer Restriction: ATE
• Brake Caliper Type: Floating Caliper, Brake Caliper (1 piston)
• Piston Diameter [mm]: 48
• for brake disc thickness [mm]: 20
• Brake Disc Type: Vented
• for brake disc diameter [mm]: 247
• Material: Cast Iron
• Net weight [kg]: 2.38
• Nimetus: PIDURISADUL
• Tootja: ELS

Lisainfo: Pidurisadul ESISILD, VASAK POOL-UUS TOODE !!! (ilma deposiidita)

• Ehitusaasta kuni: 07.1987
• Piduriketta liik: täis
• Installatsiooni pool: esisild paremal
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Pidurisüsteem: GIRLING
• Garantii: 3 aastat garantii
• Uus osa:
• Kinnitusaukude vahe (mm): 116
• Vana detaili tagastus mittevajalik:
• paaris tootenumbrid: 45SKV301
• Kaal (kg): 2,5
• Pidurikettajämedus [mm]: 10
• Pidurisadula kolvi läbimõõt [mm]: 48
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Nimetus: CE 45SKV302
• Tootja: ESEN SKV

• Ehitusaasta kuni: 07.1987
• Piduriketta liik: täis
• Installatsiooni pool: esisild vasakul
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Pidurisüsteem: GIRLING
• Garantii: 3 aastat garantii
• Uus osa:
• Kinnitusaukude vahe (mm): 116
• Vana detaili tagastus mittevajalik:
• paaris tootenumbrid: 45SKV302
• Kaal (kg): 2,5
• Pidurikettajämedus [mm]: 10
• Pidurisadula kolvi läbimõõt [mm]: 48
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY
• Nimetus: CE 45SKV301

• Installatsiooni pool: Esisild
• paired article number: 82-0531
• Fitting Position: Front Axle Right, in front of axle
• Manufacturer Restriction: ATE
• Brake Caliper Type: Floating Caliper, Brake Caliper (1 piston)
• Piston Diameter [mm]: 48
• for brake disc thickness [mm]: 20
• Brake Disc Type: Vented
• for brake disc diameter [mm]: 247
• Material: Cast Iron
• Net weight [kg]: 2.38
• Nimetus: PIDURISADUL
• Tootja: ELS

• Installatsiooni pool: Tagasild
• Ehitusaasta kuni: 07.1987
• paired article number: 87-0607-1
• Fitting Position: Rear Axle Left, behind the axle
• Manufacturer Restriction: BENDIX-BOSCH
• Piston Diameter [mm]: 30
• for brake disc thickness [mm]: 8
• Brake Disc Type: solid
• for brake disc diameter [mm]: 247
• Material: Aluminium
• Net weight [kg]: 1.95
• Nimetus: Pidurisadul
• Tootja: ELS

Brake Caliper Type: Brake Caliper with integrated parking brake, Brake Caliper (1 piston)

• Installatsiooni pool: esisild vasakul
• Kolviläbimõõdule (mm): 48
• Pidurisadulateostus: Sadul
• Pidurisüsteem: BENDIX
• paaris tootenumbrid: 6260332
• Versioon: IAM
• Uus osa:
• Vana detaili tagastus mittevajalik:
• Tootja: METZGER

• Installatsiooni pool: esisild paremal
• OE-numbri jaoks: 4400 K1, 4400 K2
• Exchange Part:
• Piston Diameter [mm]: 48
• Inner Width [mm]: 55.5
• Brake System: Bendix
• Material: Aluminium
• Brake Caliper Type: Floating Caliper
• paired article number: 0 986 473 100
• Nimetus: PIDURISADUL
• Tootja: BOS

• Installatsiooni pool: esisild vasakul
• OE-numbri jaoks: 4400 K1, 4400 K2
• Exchange Part:
• Piston Diameter [mm]: 48
• Inner Width [mm]: 55.5
• Brake System: Bendix
• Material: Aluminium
• Brake Caliper Type: Floating Caliper
• paired article number: 0 986 474 100
• Nimetus: PIDURISADUL
• Tootja: BOS