Tootekategooriad
Filter Pidurid Šassii Roolimine Jahutus/kliima Elektrisüsteem Lisad Jõuülekanne Väljalaskesüsteem Kere Süüte-/eelsüütesüsteem Mootor Klaasid/klaasipuhastus Valgustus Kütusesüsteemi seadmed Kabiinivarustus HooldusToode
Kirjeldus
Laoseis
Hind
(km-ga)
- Käigukasti liik: Käigukast
-
Sõidukivarustus: sõidukitele koos/
ilma kliimaseade - Ehitusaasta alates: 04.2004
- Netosügavus [mm]: 32
- Netopikkus [mm]: 649
- Netolaius [mm]: 406
- Radiaatori tüüp: Jahutusribid joodetud
- Materjal veekamber (radiaator): Plastik
- Nimetus: Radiator
- Kvaliteediklass: PJ
Lisainfo: CROMA 05- (kvaliteediklass PJ)
-
Surve (bar): 1,
2 - Tootja: ASHIKA
-
Surve (bar): 1,
2 - Tootja: JAPKO
- Pressure [bar]: 1.2
-
Nimetus: SULGURKATE,
JAHUTUSSEADE - Tootja: JPA
- Nimetus: Radiator
- Kvaliteediklass: ZJ
Lisainfo: CROMA 05- (kvaliteediklass ZJ)
- Sõidukivarustus: Kliimaseadmega sõidukile
- Käigukasti liik: Käigukast
- Cooling fins material: Aluminium
- Core Depth [mm]: 23
- Core Length [mm]: 600
- Core Width [mm]: 359
- Inlet Ø [mm]: 35
- Outlet Ø [mm]: 35
- Radiator type: Mechanically jointed cooling fins
- Water Tank Material (radiator): Plastic
- Radiator type: Mechanically jointed cooling fins
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Plastic
- Core Depth [mm]: 26
- Core Length [mm]: 649
- Core Width [mm]: 399
- Tootja: KAMOKA
- Mootorikood: Z 19 DT
- Käigukasti liik: Käigukast 6 käiku
- Core Depth [mm]: 34
- Core Width [mm]: 398
- Core Length [mm]: 650
- Radiator type: Mechanically jointed cooling fins
- Technical Information: Aluminium core with plastyic tanks
- Nimetus: MM BM1737
- Tootja: MAGNETI MARELLI
- Material: Aluminium
- Core Length [mm]: 650
- Core Width [mm]: 398
- Core Depth [mm]: 32
- Radiator type: Brazed cooling fins
-
Nimetus: Radiaator,
mootorijahutus - Tootja: MAX
- Material: Aluminium
- Core Length [mm]: 650
- Core Width [mm]: 398
- Core Depth [mm]: 34
- Version: Alternative
- Radiator type: Mechanically jointed cooling fins
-
Nimetus: Radiaator,
mootorijahutus - Tootja: NRF
- Nimetus: Radiator
- Kvaliteediklass: ZJ
Lisainfo: VECTRA C 02- (kvaliteediklass ZJ)
- Core Length [mm]: 650
- Core Width [mm]: 416
- Core Depth [mm]: 34
- Transmission Type: Manual Transmission
- Water Tank Material (radiator): Plastic
- Cooling fins material: Aluminium
- Assy./disassy. by qualified personnel required!:
- Tootja: ABAKUS LORO
-
Nimetus: AB 037-
017- 0085
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Sõidukivarustus: Kliimaseadmega sõidukile
- Käigukasti liik: Käigukast
- Cooling fins material: Aluminium
- Core Depth [mm]: 34
- Core Length [mm]: 650
- Core Width [mm]: 416
- Inlet Ø [mm]: 35
- Outlet Ø [mm]: 35
- Radiator type: Mechanically jointed cooling fins
- Supplementary Article/Info 2: without expansion tank
- Water Tank Material (radiator): Plastic
- Core Length [mm]: 650
- Core Width [mm]: 415
- Core Depth [mm]: 34
- Transmission Type: Automatic Transmission
- Water Tank Material (radiator): Plastic
- Cooling fins material: Aluminium
- Assy./disassy. by qualified personnel required!:
- Tootja: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Käigukasti liik: Käigukast
- Core Length [mm]: 650
- Core Width [mm]: 415
- Core Depth [mm]: 27
- Inlet Ø [mm]: 34
- Outlet Ø [mm]: 34
- Radiator type: Brazed cooling fins
- Packaging length [cm]: 93.5
- Packaging width [cm]: 50.5
- Packaging height [cm]: 13
- Weight [kg]: 3.58
- Tootja: AKSDASIS
- Käigukasti liik: Käigukast
- Core Length [mm]: 650
- Core Width [mm]: 415
- Core Depth [mm]: 34
- Inlet Ø [mm]: 34
- Outlet Ø [mm]: 34
- Radiator type: Mechanically jointed cooling fins
- Water Tank Material (radiator): Plastic
- Cooling fins material: Aluminium
- Packaging length [cm]: 100.8
- Packaging width [cm]: 55
- Packaging height [cm]: 15
- Weight [kg]: 3
- Tootja: AKSDASIS
Sõidukivarustus: Kliimaseadmega sõidukile, Kliimaautomaatikaga sõidukile
- Sõidukivarustus: Kliimaseadmega sõidukile
- Käigukasti liik: Käigukast
- Cooling fins material: Aluminium
- Core Depth [mm]: 26
- Core Length [mm]: 649
- Core Width [mm]: 399
- Inlet Ø [mm]: 35
- Outlet Ø [mm]: 34.5
- Radiator type: Brazed cooling fins
-
Supplementary Article/Info 2: without cap,
without expansion tank -
Supplementary Article/Supplementary Info: without gasket/
seal - Water Tank Material (radiator): Plastic
- Tootja: NISSENS
-
Lisainfo: CADILLAC BLS
(04- ) 1.9 CDTi
- Material: Aluminium
- Core Length [mm]: 650
- Core Width [mm]: 398
- Core Depth [mm]: 32
- Radiator type: Brazed cooling fins
-
Nimetus: RADIAATOR,
MOOTORIJAHUTUS - Tootja: NRF
-
Lisainfo: 649*414,
5*34
- Core Width [mm]: 415
- Core Length [mm]: 649
- Core Depth [mm]: 34
- Material: Aluminium
- Housing Type: Synthetic Material Housing
- Inlet Ø [mm]: 35
- Outlet Ø [mm]: 35
- Heating/Cooling: for vehicles without oil cooler
- Supplementary Article/Info 2: without coolant regulator
- Weight [kg]: 4.71
-
Nimetus: RADIAATOR,
MOOTORIJAHUTUS - Tootja: VAL
- Netosügavus [mm]: 32
- Netopikkus [mm]: 650
- Netolaius [mm]: 415
- Radiaatori tüüp: Jahutusribid joodetud
- Materjal veekamber (radiaator): Plastik
- Nimetus: Radiator
- Kvaliteediklass: PJ
Lisainfo: VECTRA C 02- (kvaliteediklass PJ)
- Radiator type: Mechanically jointed cooling fins
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Plastic
- Core Depth [mm]: 32
- Core Length [mm]: 650
- Core Width [mm]: 399
- Tootja: KAMOKA
- Netopikkus [mm]: 650
- Netolaius [mm]: 416
- Netosügavus [mm]: 34
-
Seerianumber: CCH-
FT- 004 - Käigukasti liik: Automaatkäigukast
- Jahutusribi materjal: Alumiinium
- Materjal veekamber (radiaator): Plastik
- Radiaatori tüüp: Jahutusribid mehaaniliselt ühendatud
-
Piirangutega toode/piirangu info 2: ilma võrdsustusanumata,
ilma raamita
Sõidukivarustus: Kliimaseadmega sõidukile, sõidukitele ilma kliimaseadmeta
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Radiator type: Mechanically jointed cooling fins
- Core Length [mm]: 650
- Core Width [mm]: 416
- Core Depth [mm]: 34
- Water Tank Material (radiator): Plastic
- Transmission Type: Manual Transmission
- Packaging height [cm]: 13
-
Net Weight [g]: 3,
580 - Packaging width [cm]: 50.5
- Packaging length [cm]: 93.5
- Nimetus: MH CR835001S
- Tootja: MAHLE
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Core Length [mm]: 650
- Core Width [mm]: 416
- Core Depth [mm]: 34
- Transmission Type: Automatic Transmission
- Water Tank Material (radiator): Plastic
- Cooling fins material: Aluminium
- Assy./disassy. by qualified personnel required!:
- Tootja: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Käigukasti liik: Automaatkäigukast
- Cooling fins material: Aluminium
- Core Depth [mm]: 34
- Core Length [mm]: 650
- Core Width [mm]: 416
- Radiator type: Mechanically jointed cooling fins
- Supplementary Article/Supplementary Info: with oil cooler
- Water Tank Material (radiator): Plastic
- Käigukasti liik: Automaatkäigukast
- Cooling fins material: Aluminium
- Core Depth [mm]: 34
- Core Length [mm]: 650
- Core Width [mm]: 416
- Inlet Ø [mm]: 35
- Outlet Ø [mm]: 35
- Radiator type: Mechanically jointed cooling fins
-
Supplementary Article/Info 2: with cap,
without expansion tank -
Supplementary Article/Supplementary Info: with oil cooler,
with gaskets/ seals - Water Tank Material (radiator): Plastic
- Tootja: NISSENS
-
Lisainfo: CADILLAC BLS
(04- ) 1.9 CDTi
Installation Information: FIRST FIT - a time-saving installation! Find all additional parts such as caps, gaskets, nuts, clamps, plugs, bolts, fittings, screws and other parts in the box
- Nimetus: Radiator
- Kvaliteediklass: Q
Lisainfo: "Tootja: OEM/OES (VALEO)
CROMA 05-
(kvaliteediklass: Q)"
Laki Auto universaaltooted
TecDoc sõidukite kataloog
TecDoc veokite kataloog