Tootekategooriad
Filtrid Pidurid vedrustus/alusvanker Roolisüsteem Jahutus/kliima Elektrisüsteem Veokonks/lisad Jõuülekanne Väljalaskesüsteem Kere Süüte-/eelsüütesüsteem Mootor Klaasid/klaasipuhastus Valgustus Kütus Kabiinivarustus HooldusToode
Kirjeldus
Laoseis
Hind
(km-ga)
-
Fabrication Number: ECP-
PL- 040 - Tootja: NTY
- Number of pins: 2
- Sensor Type: Inductive Sensor
- Model Year from: 2007
- Assy./disassy. by qualified personnel required!:
- Tootja: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Sensor Type: Inductive Sensor
- Number of pins: 3
-
Fabrication Number: ECP-
PL- 014 - Tootja: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- for OE number: 12 38 938
- Length [mm]: 69
- Supplementary Article/Info 2: with seal ring
-
Fabrication Number: ECP-
PL- 009 - Tootja: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Sensor Type: Active sensor
- Tootja: KAMOKA
- Number of pins: 3
- Sensor Type: Hall Sensor
- Assy./disassy. by qualified personnel required!:
- Tootja: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Supplementary Article/Info 2: without cable
- Number of pins: 2
- for OE number: 9947855
- Sensor Type: Inductive Sensor
- Assy./disassy. by qualified personnel required!:
- Tootja: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Supplementary Article/Info 2: without cable
- Number of pins: 2
- Sensor Type: Inductive Sensor
- Assy./disassy. by qualified personnel required!:
- Tootja: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- for OE number: 10456604
- Sensor Type: Passive sensor
- Tootja: KAMOKA
- Mootorikood: Z 16 SE
- Sensor Type: Passive sensor
- Supplementary Article/Info 2: without cable
- Number of pins: 2
- Voltage [V]: 12
-
Nimetus: ANDUR,
VNTVOLL - Tootja: MAX
- Length [mm]: 69
- Number of connectors: 2
-
Lisainfo: Sensor,
crankshaft pulse
Tootja: MAGNETI MARELLI
- Height [mm]: 39
-
Resistor [Ohm]: 2,
300 - Number of connectors: 2
- Tootja: VERNET
- Number of pins: 2
-
Nimetus: ANDUR,
VNTVOLL - Tootja: DLP
Lisainfo: "Tootja: DELPHI
COMBO TOUR, 10.01-
(kvaliteediklass: PJ)"
- Sensor Type: Inductive Sensor
- Supplementary Article/Info 2: with seal ring
- Number of pins: 2
-
Nimetus: ANDUR,
VNTVOLL - Tootja: MEY
- Connector Shape: oval
- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Tootja: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Mootorikood: Z 16 SE
- Voltage [V]: 12
- Supplementary Article/Supplementary Info: without cable pull
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.04
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Nimetus: CE 17SKV248
- Tootja: ESEN SKV
Tootja: MAGNETI MARELLI
- vajaminev tükihulk: 1
- Number of pins: 2
- Sensor Type: Inductive Sensor
- Supplementary Article/Info 2: with cable
- Housing Colour: black
- Tootja: BREMI
- Number of pins: 2
- Sensor Type: Inductive Sensor
- Supplementary Article/Info 2: without cable
- Quality: OE EQUIVALENT
- for OE number: 01238938
- Tootja: MEAT&DORIA
- Mootorikood: Z 16 SE
- Supplementary Article/Info 2: without cable
- Number of pins: 3
-
Nimetus: Andur,
Nukkvollipositsioon - Tootja: MAX
- Operating Mode: Electric
- Tootja: MAGNETI MARELLI
-
Resistor [Ohm]: 2,
700 - Number of pins: 2
-
Sensor Type: Inductive Sensor,
Passive sensor - Number of connectors: 2
- Connector Shape: oval
-
Supplementary Article/Info 2: with seal ring,
without cable - Required quantity: 1
- Operating Mode: Electric
- Socket colour: black
-
Supplementary Article/Supplementary Info: with gasket/
seal - Rated Voltage [V]: 12
- Fitting Depth [mm]: 39.3
- Number of mounting bores: 1
- Tootja: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Depth [mm]: 39.6
- Number of connectors: 2
- Number of mounting bores: 1
-
Operating temperature from [°C]: -
40 - Operating temperature to [°C]: 125
- Sensor Type: Inductive Sensor
- Connector Shape: rectangular
- Colour: black
- Nimetus: SN CKP158.04
- Tootja: SNR
- Ehitusaasta kuni: 02.2004
- Mootorikood: Z 16 SE
- Sensor Type: Inductive Sensor
- Number of pins: 2
- Connector Shape: oval
- Supplementary Article/Info 2: without cable
- Tootja: VALEO
- Nimetus: VA 366177
- Mootorikood: Z 16 SE
- Number of pins: 3
- Connector Shape: oval
- Supplementary Article/Info 2: without cable
- Sensor Type: Hall Sensor
- Fitting Depth [mm]: 24
- for OE number: 1236308
-
Nimetus: Andur,
Nukkvollipositsioon - Tootja: MD
- Mootorikood: Z 16 SE
-
Nimetus: ANDUR,
VNTVOLL - Tootja: EPS
- Colour: black
- Alternatively:
- Number of pins: 2
- Fitting Depth [mm]: 39
- Weight [kg]: 0.03
- Alternative Repair Kit: 550052
- Resistor [kOhm]: 2.4
- Tootja: ERA
- Mootorikood: Z 16 SE
- Tootja: FACET
- Length [mm]: 69
- Number of connectors: 2
- Weight [kg]: 0.03
- Supplementary Article/Info 2: with seal ring
- Tootja: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of pins: 2
- Tootja: FAE
- Length [mm]: 69
- Number of connectors: 2
- Weight [kg]: 0.03
- Supplementary Article/Info 2: with seal ring
- Nimetus: SW 40 92 2374
- Tootja: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Height [mm]: 24
- Sensor Type: Hall Sensor
- Number of connectors: 3
- Tootja: VERNET
- Number of pins: 3
- Tootja: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Number of mounting bores: 1
- Voltage [V]: 12
-
Resistor [Ohm]: 2,
700 - Sensor Type: Inductive Sensor
-
Supplementary Article/Supplementary Info: with gasket/
seal - Number of pins: 2
- Supplementary Article/Info 2: without cable
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Nimetus: CZUJNIK POO½ENIA WAU KORB. OPEL
- Tootja: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Number of pins: 3
-
Nimetus: ANDUR,
NUKKVOLLIPOSITSIOON - Tootja: DLP
- Sensor Type: Hall Sensor
- Mounting Type: Screw Connection
- Shape: oval
- Number of pins: 3
- Fitting Depth [mm]: 23.9
- Supplementary Article/Info 2: with seal ring
- Tootja: NRF
- Length [mm]: 52
- Number of connectors: 3
- Weight [kg]: 0.03
- Supplementary Article/Info 2: with seal ring
-
Nimetus: ANDUR,
NUKKVOLLIPOSITSIOON - Tootja: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Colour: black
- Number of pins: 2
- Fitting Depth [mm]: 39
- Weight [kg]: 0.03
- Resistor [kOhm]: 2.4
- Tootja: ERA
- Number of pins: 2
- Tootja: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
Tootja: MAGNETI MARELLI
- Number of pins: 2
- Housing Colour: black
- Tootja: FAE
- Rated Voltage [V]: 12
- Cable Length 1 [mm]: 265
- Number of connectors: 3
- Number of mounting bores: 2
-
Operating temperature from [°C]: -
40 - Operating temperature to [°C]: 125
- Sensor Type: Hall Sensor
- Connector Shape: rectangular
- Colour: black
- Nimetus: SN CMP171.11
- Tootja: SNR
- Mootorikood: Z 16 SE
-
Nimetus: ANDUR,
NUKKVOLLIPOSITSIOON - Tootja: EPS
- Mootorikood: Z 16 SE
- Tootja: FACET
- Number of pins: 3
- Tootja: FAE
- Guarantee: 5 years guarantee
- Tootja: HUCO
-
Sensor Type: Active sensor,
Hall Sensor - Number of pins: 3
- Number of connectors: 3
- Rated Voltage [V]: 12
- Fitting Depth [mm]: 24
- Resistor [kOhm]: 1.5
- Tootja: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universaaltooted
TecDoc sõidukite kataloog
TecDoc veokite kataloog