Tootekategooriad
Filtrid Pidurid vedrustus/alusvanker Roolisüsteem Jahutus/kliima Elektrisüsteem Veokonks/lisad Jõuülekanne Väljalaskesüsteem Kere Süüte-/eelsüütesüsteem Mootor Klaasid/klaasipuhastus Valgustus Kütus Kabiinivarustus HooldusToode
Kirjeldus
Laoseis
Hind
(km-ga)
-
Thread Size: M14x1,
5 - Length [mm]: 13
- Outer Diameter [mm]: 25
- Tightening torque to [Nm]: 25
- Spanner Size: R7
- Lisainfo: PAKENDIS 10 tk
- Thickness [mm]: 2
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 22
-
Material: NBR
(nitrile butadiene rubber) - Weight [kg]: 0.001
- Tootja: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 22
- Tootja: DELLO AUTOMEGA
- Kogus pakendis: 25
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 22
- Thickness [mm]: 2
-
Material: FPM
(fluoride rubber) -
Shape: O-
Ring -
Alternative Repair Kit: 505.550,
505.540 - Tootja: ELRING
- Mootorikood: X 17 DTL
-
Material: FPM
(fluoride rubber) - Thickness [mm]: 2
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 22
- Tootja: REINZ
- Kogus pakendis: 25
- Outer Diameter [mm]: 22
- Thickness [mm]: 2
-
Material: NBR
(nitrile butadiene rubber) - Inner Diameter [mm]: 18
- Fitting Position: Oil Sump
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Thickness [mm]: 2
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 22
-
Material: NBR
(nitrile butadiene rubber) - Weight [kg]: 0.001
- Tootja: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Mootorikood: X 17 DTL
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 1.5
- Tootja: AJUSA
-
Thread Size: M14x1,
5 - Length [mm]: 14
- Tootja: DELLO AUTOMEGA
- Lisainfo: 130097610 DELLO
- Kogus pakendis: 10
- Supplementary Article/Info 2: with seal ring
- Tootja: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Kogus pakendis: 5
- Thread Size: M 14
- Thread Pitch [mm]: 1.5
- Bolt Head-/Nut Design: Female Torx
-
Supplementary Article/Supplementary Info: with gasket/
seal -
for OE number: 06 52 315,
1 722 061, 0311 42, 2411 7 533 937 - Tootja: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Length [mm]: 14
-
Thread Size: M14 x 1,
50 - Supplementary Article/Info 2: with seal ring
- Tootja: 3RG
-
Thread Size: M14x1,
5x13, 5 - Spanner Size: TX 40
- Bolt Head-/Nut Design: Female Torx
- Supplementary Article/Info 2: with seal ring
- Tootja: DR MOTOR
-
Thread Size: M14x1,
5 - Length [mm]: 10
- Supplementary Article/Info 2: with seal ring
- Tootja: FA1 FISCHER
- Inner Diameter [mm]: 18
-
Material: NBR
(nitrile butadiene rubber) - Outer Diameter [mm]: 22
-
Shape: O-
Ring - Thickness [mm]: 2
- Packing Type: Blister Pack
- Tootja: CORTECO
- Length [mm]: 13
- Outer Diameter [mm]: 25
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 8
- Spanner Size: T45
- Bolt Head-/Nut Design: Female Torx
- Material: Steel
-
Surface: Zink-
nickel coated - Screw length below head [mm]: 10
- Weight [kg]: 0.022
- Supplementary Article/Info 2: with seal ring
- Observe service information:
- Tootja: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 13
- Outer Diameter [mm]: 25
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 8
- Spanner Size: T45
- Bolt Head-/Nut Design: Female Torx
- Material: Steel
-
Surface: Zink-
nickel coated - Screw length below head [mm]: 10
- Weight [kg]: 0.022
- Supplementary Article/Info 2: with seal ring
- Observe service information:
- Tootja: BLUEPRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 13
- Outer Diameter [mm]: 25
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 8
- Spanner Size: T45
- Bolt Head-/Nut Design: Female Torx
- Material: Steel
-
Surface: Zink-
nickel coated - Screw length below head [mm]: 10
- Weight [kg]: 0.022
- Supplementary Article/Info 2: with seal ring
- Observe service information:
- Nimetus: SW 40 90 4572
- Tootja: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thread Size: M14x1.5
- Bolt Head-/Nut Design: Female Torx
- Supplementary Article/Info 2: with seal ring
- Tootja: FAST
- Length [mm]: 13
- Outer Diameter [mm]: 25
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 8
- Spanner Size: T45
- Bolt Head-/Nut Design: Female Torx
- Material: Steel
-
Surface: Zink-
nickel coated - Screw length below head [mm]: 10
- Weight [kg]: 0.022
- Supplementary Article/Info 2: with seal ring
- Observe service information:
- Tootja: ENERGY
- Length [mm]: 13
- Outer Diameter [mm]: 25
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 8
- Spanner Size: T45
- Bolt Head-/Nut Design: Female Torx
- Material: Steel
-
Surface: Zink-
nickel coated - Screw length below head [mm]: 10
- Supplementary Article/Info 2: with seal ring
- Observe service information:
- Tootja: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Kogus pakendis: 5
- Length [mm]: 13
- Outer Diameter [mm]: 25
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 8
- Spanner Size: T45
- Bolt Head-/Nut Design: Female Torx
- Material: Steel
-
Surface: Zink-
nickel coated - Screw length below head [mm]: 10
- Weight [kg]: 0.022
- Supplementary Article/Info 2: with seal ring
- Observe service information:
- Tootja: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Thread Size: M14x1,
5x13, 5 - Bolt Head-/Nut Design: Female Torx
- Alternative Repair Kit: 505.540
- Supplementary Article/Info 2: with seal ring
- Tootja: ELRING
- Supplementary Article/Info 2: with seal ring
-
Thread Size: M 14 x 1,
50 x 10, 5 - Bolt Head-/Nut Design: Female Torx
- Length [mm]: 14
- Material: Steel
- Packing Type: Blister Pack
-
Surface: Zinc-
coated - Tightening torque to [Nm]: 14
- Nimetus: COU 220110S
- Tootja: CORTECO
- Kogus pakendis: 5
-
Thread Size: M14 x 1,
5 - Spanner Size: TX 45
- Bolt Head-/Nut Design: Female Torx
- Thread Length [mm]: 10.5
- Supplementary Article/Info 2: with seal ring
- Thread Pitch [mm]: 1.5
- Fitting Position: engine sided
-
Surface: Zink-
nickel coated - Required quantity: 1
- Material: Steel
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 22
-
Shape: O-
Ring - Thickness [mm]: 2
- Tootja: DR MOTOR
- Kogus pakendis: 100
- Inner Diameter [mm]: 18
- Thickness [mm]: 2
-
Shape: O-
Ring -
Material: NBR
(nitrile butadiene rubber)
- Kogus pakendis: 10
- Inner Diameter [mm]: 18
- Thickness [mm]: 2
-
Shape: O-
Ring - Alternatively:
-
Material: NBR
(nitrile butadiene rubber)
Laki Auto universaaltooted
TecDoc sõidukite kataloog
TecDoc veokite kataloog