Tootekategooriad
Filtrid Pidurid vedrustus/alusvanker Roolisüsteem Jahutus/kliima Elektrisüsteem Veokonks/lisad Jõuülekanne Väljalaskesüsteem Kere Süüte-/eelsüütesüsteem Mootor Klaasid/klaasipuhastus Valgustus Kütus Kabiinivarustus HooldusToode
Kirjeldus
Laoseis
Hind
(km-ga)
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Tootja: GSP
-
Installatsiooni pool: Tagasild mõlemapoolselt,
sees - Materjal: Kumm
- Siseläbimõõt [mm]: 27
- Tootja: MERTZ
- Kogus pakendis: 10
- Fitting Position: Front Axle both sides
- Inner Diameter 1 [mm]: 12
- Weight [kg]: 0.055
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Inner Diameter [mm]: 23
- Required quantity: 2
-
Fitting Position: Front Axle,
inner - Length from [mm]: 45
- Length [mm]: 45
- Mounting Type: Rubber Mount
- Weight [kg]: 0.085
-
Nimetus: Paigutus -
Kndmik DB P. SPRINTER 06- - Tootja: TED
- Šassii: tugevdatud šassiiga sõidukile
- Kogus pakendis: 2
- Required quantity: 2
- Inner Diameter [mm]: 27
- Mounting Type: Rubber Mount
- Fitting Position: Rear Axle both sides
- Weight [kg]: 0.081
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: inner,
Rear Axle Left, Rear Axle Right - for OE number: 051 188 00 AA
- Tootja: GSP ZAWIESZENIE
-
Installatsiooni pool: Tagasild mõlemapoolselt,
sees - Siseläbimõõt [mm]: 27
- Materjal: Kumm
- Tootja: FAST
-
Installatsiooni pool: esisild mõlemapoolselt,
Tagasild mõlemapoolselt - Siseläbimõõt [mm]: 12
- Välisläbimõõt [mm]: 27
- Nimetus: ALT 86072AL
- Tootja: ALTE AUTOMOTIVE
- Inner Diameter [mm]: 15.5
- Mounting Type: Rubber Mount
-
Fitting Position: Rear Axle,
inner - Length [mm]: 45
- Weight [kg]: 0.078
- Required quantity: 2
- Length from [mm]: 45
- Tootja: TEDGUM
- erivarustuse koodile: C42
- Fitting Position: Rear Axle
- Diameter [mm]: 30
- Weight [kg]: 0.1
- Inner Diameter [mm]: 30
- Packaging length [cm]: 5.4
- Packaging width [cm]: 5
- Packaging height [cm]: 4.6
- Tootja: FEBEST
- Mounting Type: Rubber Mount
-
Fitting Position: Front Axle,
inner - Length [mm]: 45
- Required quantity: 2
- Weight [kg]: 0.093
- Inner Diameter [mm]: 20
- Length from [mm]: 45
- Tootja: TEDGUM
- Nimetus: TG TED61310
-
erivarustuse koodile: -
ZG1- ZG2- ZG3- ZG4+C40, C40 - Fitting Position: Front Axle
- Weight [kg]: 0.109
- Inner Diameter [mm]: 20
- Packaging length [cm]: 5.6
- Packaging width [cm]: 5.4
- Packaging height [cm]: 4.5
- Tootja: FEBEST
- Šassii: sõidukitele ilma tugevdatud šassiita
- Installatsiooni pool: Esisild
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 17
- Length [mm]: 47
- Width [mm]: 52
- for OE number: 2E0411041E
- Tootja: DELLO AUTOMEGA
- Required quantity: 2
- Inner Diameter [mm]: 19
- Mounting Type: Rubber Mount
- Fitting Position: Rear Axle
- Weight [kg]: 0.08
- Length from [mm]: 45
- Length [mm]: 45
- Tootja: TED
Nimetus: Paigutus - Kndmik DB T. SPRINTER 906 ALL 2,1-3,5 06-
- Length [mm]: 46
- Width [mm]: 50
- Thickness [mm]: 53
- Inner Diameter [mm]: 30
- Observe service information:
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Nimetus: Paigutus -
Kndmik DB T. SPRINTER - Tootja: MAX
- Šassii: tugevdatud šassiiga sõidukile
- reinforced version:
- Inner Diameter [mm]: 27
- Material: Rubber
-
Fitting Position: Rear Axle,
inner - Weight [kg]: 0.077
-
Nimetus: Paigutus -
Kndmik DB T. SPRINTER 97- 27MM - Tootja: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Installatsiooni pool: Tagasild mõlemapoolselt
- Jämedus/Tugevus (mm): 53
- Pikkus (mm): 46
- Laius (mm): 50
- Siseläbimõõt [mm]: 30
- Tootja: MERTZ
-
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal - Jämedus/Tugevus (mm): 69
- Pikkus (mm): 71
- Laius (mm): 56
- Siseläbimõõt [mm]: 30
- Välisläbimõõt [mm]: 71
- Tootja: FAST
- Installatsiooni pool: Tagasild mõlemapoolselt
- Siseläbimõõt [mm]: 19
- vajaminev tükihulk: 2
- Tootja: FAST
- Šassii: tugevdatud šassiiga sõidukile
- reinforced version:
- Inner Diameter [mm]: 27
- Material: Rubber
-
Fitting Position: Rear Axle,
inner - Weight [kg]: 0.077
- Nimetus: SW 10 91 8875
- Tootja: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle,
inner - Required quantity: 2
-
Material: PU
(Polyurethane) - Inner Diameter [mm]: 15
- Tootja: TEDGUM
- Installatsiooni pool: Pealis
-
Laagritüüp: Kummi-
metalllaager - Nimetus: Stabilizer link mount left=right
- Kvaliteediklass: PJ
Lisainfo: "Tootja: TEKNOROT
MB SPRINTER/VW LT II
(kvaliteediklass: PJ)"
-
Installatsiooni pool: esisild vasakul,
esisild paremal - Siseläbimõõt [mm]: 12
- Välisläbimõõt [mm]: 27
- Pikkus (mm): 26
- paaris tootenumbrid: 270700
-
Kaal (kg): 0,
04 -
Montaažiinfo: Important:
Observe Fitting Instructions - Tootja: A.B.S.
- Installatsiooni pool: esisild mõlemapoolselt
- Siseläbimõõt [mm]: 20
-
Pikkus (mm): 52,
5 - vajaminev tükihulk: 2
- Laagritüüp: Kummipuks
- Nimetus: ALT 90939AL
- Tootja: ALTE AUTOMOTIVE
- Installatsiooni pool: Tagasild mõlemapoolselt
- Siseläbimõõt [mm]: 24
- Laagritüüp: Kummipuks
- Kvaliteediklass: PJ
- Nimetus: Stabilizer mount left=right
- Installatsiooni pool: Esisild
- Siseläbimõõt [mm]: 20
- Välisläbimõõt [mm]: 45
- Pikkus (mm): 52
- vajaminev tükihulk: 2
- Laagritüüp: Kummipuks
- Kõrgus (mm): 47
- Nimetus: ALT 88159AL
- Tootja: ALTE AUTOMOTIVE
-
erivarustuse koodile: -
ZG1- ZG2- ZG3- ZG4+C40 - Fitting Position: Front Axle
- Diameter [mm]: 20
- Weight [kg]: 0.157
- Inner Diameter [mm]: 16
- Packaging length [cm]: 5.8
- Packaging width [cm]: 5.3
- Packaging height [cm]: 4.8
- Tootja: FEBEST
- Fitting Position: Front Axle
- Diameter [mm]: 20
- Weight [g]: 150
- Nimetus: IM 32025
- Tootja: ORIGINAL IMPERIUM
- Length [mm]: 46
- Width [mm]: 50
- Thickness [mm]: 53
- Inner Diameter [mm]: 30
- Fitting Position: Rear Axle
- Weight [kg]: 0.07
-
Nimetus: Paigutus -
Kndmik DB T. SPRINTER 06- - Tootja: FEB
- Lisainfo: F36130
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 46
- Width [mm]: 50
- Thickness [mm]: 53
- Inner Diameter [mm]: 30
- Fitting Position: Rear Axle
- Weight [kg]: 0.07
- Nimetus: SW 10 93 6130
- Tootja: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Installatsiooni pool: taga,
sees, vasakul, paremal - Kogus pakendis: 2
- Inner Diameter 1 [mm]: 33
- Thickness 1 [mm]: 49.2
- Inner Diameter 2 [mm]: 33
- Thickness 2 [mm]: 49.2
- Nimetus: DE TD1922W
- Tootja: DELPHI
- Installatsiooni pool: Esisild
- Quality: OE Performance
-
Material: Rubber,
Metal - Fitting Position: Front
- Colour: black
- Weight [g]: 146
- Inner Diameter [mm]: 20
- Tootja: GATES
- Installatsiooni pool: Tagasild mõlemapoolselt
-
Siseläbimõõt [mm]: 12,
2 - Laagritüüp: Kummipuks
- Pikkus (mm): 36
-
Kaal (kg): 0,
088 - Tootja: RTS
-
Installatsiooni pool: esisild vasakul,
esisild paremal - for OE number: 2E0 411 041 C
- Tootja: GSP
- Eriotstarbe-sõid.: mitte kämpingsõidukite jaoks
- Length [mm]: 71
- Width [mm]: 56
- Thickness [mm]: 69
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 71
- Fitting Position: Rear Axle
- Weight [kg]: 0.22
- Tootja: FEB
- Lisainfo: FE45867
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Nimetus: Paigutus - Kndmik DB T. SPRINTER/CRAFTER 06- 30MM
-
Installatsiooni pool: ees,
sees, vasakul, paremal - Kogus pakendis: 2
- Inner Diameter 1 [mm]: 23
- Thickness 1 [mm]: 45
- Tootja: DELPHI ZAWIESZENIE
- Šassii: sõidukitele ilma tugevdatud šassiita
- Length [mm]: 52
- Width [mm]: 47
- Thickness [mm]: 57
- Inner Diameter [mm]: 16
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.15
- Tootja: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Nimetus: Paigutus - Kndmik DB P. SPRINTER/CRAFTER 06- R. WEW20M
- Installatsiooni pool: Esisild
- for OE number: 2E0 407 473 E
- Tootja: GSP
- Installatsiooni pool: Esisild
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 16
- SVHC: No SVHC present!
- Tootja: FAG
- Nimetus: LU 819022610
- Installatsiooni pool: esisild mõlemapoolselt
-
Siseläbimõõt [mm]: 20,
8 - Laagritüüp: Kummipuks
-
Kaal (kg): 0,
153 - Pikkus (mm): 48
- Tootja: RTS
- Installatsiooni pool: Tagasild mõlemapoolselt
- Siseläbimõõt [mm]: 17
- Laagritüüp: Kummipuks
-
Kaal (kg): 0,
154 -
Pikkus (mm): 52,
3 - Tootja: RTS
-
Installatsiooni pool: ees,
sees, vasakul, paremal - Kogus pakendis: 2
- Tootja: DELPHI
- Nimetus: DE TD1086W
- Installatsiooni pool: esisild mõlemapoolselt
- Laagritüüp: Kummipuks
-
Kaal (kg): 0,
16 -
Siseläbimõõt [mm]: 16,
5 - Pikkus (mm): 45
- Tootja: RTS
- Required quantity: 2
-
Material: PU
(Polyurethane) - Colour: red
- Inner Diameter [mm]: 19
- Shore-A hardness value, base body: 80
- Fitting Position: Rear Axle
- Supplementary Article/Info 2: with grease cap
- Length from [mm]: 45
- Length [mm]: 45
- Weight [kg]: 0.08
- Tootja: TED
Nimetus: Paigutus - Kndmik DB T. SPRINTER 906 ALL 2,1-3,5 06- !!!POLIURETAN!!!
-
Installatsiooni pool: ees,
esisild vasakul, esisild paremal, sees - Siseläbimõõt [mm]: 17
- Välisläbimõõt [mm]: 45
- Pikkus (mm): 53
- paaris tootenumbrid: 270835
-
Kaal (kg): 0,
1 -
Montaažiinfo: Important:
Observe Fitting Instructions - Tootja: A.B.S.
-
erivarustuse koodile: IT5,
C43, ZG1, ZG3 - Plokieraldus:
-
Sõidukite tootmisettevõte: N,
A, E - Tootmise kuupäev alates: 05.05.2016
- Kerenumber (VIN) alates: E123174
-
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal - vajaminev tükihulk: 2
- Siseläbimõõt [mm]: 30
- Garantii: Garantii 3 aastat või kuni 75 000 km
- Tootja: METZGER
- Installatsiooni pool: esisild mõlemapoolselt
- vajaminev tükihulk: 2
- Materjal: Kumm
- Nimetus: SK VKDS368004
- Tootja: SKF
- Tootja: FAST
Installatsiooni pool: esisild mõlemapoolselt, esisild vasakul, esisild paremal
Laki Auto universaaltooted
TecDoc sõidukite kataloog
TecDoc veokite kataloog