• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Switch Point [°C]: 150
• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Tootja: JP GROUP
• Lisainfo: Sender for water temperature, 2 pins

• Housing Colour: black
• Tootja: KAMOKA

• Number of pins: 2
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MAX

• Seerianumber: ECT-ME-004
• Tootja: NTY
• Nimetus: NTY ECT-ME-004

• Number of pins: 2
• Nimetus: ANDUR,SISENDOHU TEMPERATUUR
• Tootja: MAX
• Lisainfo: 21-0292

• Thread Size: 9 mm
• Tootja: VERNET
• Lisainfo: WS2698

• for OE number: 099 905 3800
• Tootja: TRUCKTEC

• Number of pins: 2
• Length [mm]: 88
• Height [mm]: 89.5
• Weight [kg]: 0.1
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• for OE number: 5080147AA
• Supplementary Article/Info 2: with seal ring
• Nimetus: Andur,Jahutusvedeliku temp.
• Tootja: NRF

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• Spanner Size: 19
• Thread Size: M14x1.5
• for OE number: 0005426218
• Supplementary Article/Info 2: with seal ring
• Nimetus: Andur,Jahutusvedeliku temp.
• Tootja: NRF

Tootja: FAST

• Mootorikood: M 271.956
• vajaminev tükihulk: 1
• Nimetus: ANDUR,SISENDOHU TEMPERATUUR
• Tootja: EPS
• Lisainfo: 1-994-014

• Installatsiooni pool: Imitoru
• Connector Shape: oval
• Number of pins: 2
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Seerianumber: ECP-ME-001
• Tootja: NTY

• OE-numbri jaoks: 003 153 28 28
• Seerianumber: ECP-CH-020
• Tootja: NTY

• Kaal (kg): 0,01
• Garantii: 3 aastat garantii
• Pins'ide arv: 2
• Tootja: SKV GERMANY

• Pistikkontaktide arv: 2
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Thread Size: 15 mm
• Tootja: VERNET

• Pistikkontaktide arv: 2
• Tootja: ERA

Tootja: FAST

• Sensor Type: Passive sensor
• for OE number: 05080352AA
• Tootja: KAMOKA

• Connector Shape: D Shape
• Number of pins: 2
• for OE number: 003 153 27 28
• Supplementary Article/Info 2: without cable
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Keermemõõt: 9 mm
• Anduritüüp: NTC-andur
• Pistikkontaktide arv: 2
• Tootja: ERA

• Mootorikood: M 271.956
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: EPS

for article number: 1.880.588, 1.880.589, 1.880.590, 1.880.591, 1.880.592, 1.880.593, 1.880.594, 1.880.595, 1.880.596, 1.880.597, 1.880.598, 1.880.784, 1.880.847, 1.880.935

• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Installatsiooni sügavus (mm): 24,3
• Piirangutega toode/piirangu info 2: ilma kaablita
• Pistikukatte kuju: ovaalne
• Seerianumber: ECP-ME-000
• Tootja: NTY

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.015
• for OE number: 099 905 38 00
• Supplementary Article/Info 2: with seal ring
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.015
• for OE number: 099 905 38 00
• Supplementary Article/Info 2: with seal ring
• Tootja: SWAG
• Nimetus: SW 10 93 4074

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 52
• Outer Diameter [mm]: 10
• Number of connectors: 2
• Weight [kg]: 0.005
• Nimetus: ANDUR,SISENDOHU TEMPERATUUR
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Tootja: DELLO AUTOMEGA

• Piirangutega toode/piirangu info: õlitihe
• Pistikkontaktide arv: 2
• Seerianumber: ECP-ME-005
• Tootja: NTY
• Nimetus: NTY ECP-ME-005

Tootja: FAE

• Height [mm]: 18.2
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Weight [kg]: 0.021
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 2
• Operating Mode: Mechanical
• Assy./disassy. by qualified personnel required!:
• Tootja: HELLA
• Nimetus: HE 6DD010966431

Käigukasti liik: mitte 5-käigulise autom.kasti jaoks, mitte 7-käigulise autom.kasti jaoks

• Seerianumber: ESS-ME-000
• Tootja: NTY

• Sensor Type: NTC Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MEY

• Sensor Type: Passive sensor
• Supplementary Article/Info 2: without cable
• Voltage [V]: 12
• Nimetus: ANDUR, VŽNTVOLL
• Tootja: MAX

• Sensor Type: Passive sensor
• Number of pins: 2
• Fitting Depth [mm]: 40.2
• Tootja: OPTIMAL ZAWIESZENIE

• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info: koos tihendiga
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• vajaminev tükihulk: 1
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Nimetus: ANDUR,SISENDOHU TEMPERATUUR
• Tootja: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Housing Colour: black
• Sensor Type: NTC Sensor
• Tootja: FAE

• Pinge [V]: 12
• Piirangutega toode/piirangu info: ilma trossideta
• Pistikkontaktide arv: 2
• Kaal (kg): 0,04
• Rakendustüüp: elektriline
• Garantii: 3 aastat garantii
• Tootja: SKV GERMANY
• Nimetus: CE 17SKV330

• Seerianumber: ECP-ME-006
• Pistikkontaktide arv: 3
• Tootja: NTY

• Pistikkontaktide arv: 2
• Võimsus [W]: 0,06
• Tootja: METZGER

• for OE number: 003 153 8628
• Tootja: TRUCKTEC

Seerianumber: ECP-ME-003

• Number of pins: 2
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• Flange Hole Diameter [mm]: 8
• for OE number: 5946 21, 004 153 90 28, 89615 05010
• Tootja: MEAT&DORIA

• Sensor Type: NTC Sensor
• Tootja: FAE

• Värv: must
• valikuliselt:
• Pistikkontaktide arv: 2
• Installatsiooni sügavus (mm): 18,3
• Kaal (kg): 0,046
• Tootja: ERA

• Mootorikood: M 271.956
• Nimetus: EP 1.953.578
• Tootja: EPS

• vajaminev tükihulk: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Tootja: BRM

Nimetus: CZUJNIK POO½ENIA WAU KORB. DB A KLASA W168 1,4 97-

• Number of pins: 2
• Connector Shape: D Shape
• Sensor Type: Inductive Sensor
• Resistor [Ohm]: 1,080
• Supplementary Article/Info 2: without cable
• Quality: OE EQUIVALENT
• Nimetus: Andur, v„ntvoll
• Tootja: MD

• Anduritüüp: Induktiivandur
• Pistikkontaktide arv: 2

• Number of pins: 2
• Nimetus: ANDUR, VŽNTVOLL
• Tootja: DLP

• Nimetus: DETONATSIOONIANDUR
• Tootja: BOS

• Weight [kg]: 0.014
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Flywheel side
• Sensor Type: Inductive Sensor, Passive sensor
• Number of connectors: 2
• Supplementary Article/Info 2: for crankshaft, without cable
• Required quantity: 1
• Resistor [Ohm]: 680
• Alternatively:
• Colour: black
• Operating Mode: Electric
• Mounting Type: Bolted
• Number of pins: 2
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 40
• Connector Shape: D Shape
• Number of mounting bores: 1
• Weight [kg]: 0.029
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pikkus (mm): 40
• valikuliselt:
• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info 2: ilma kaablita
• alternatiivne remondikomplekt: 550275
• Takistus [koom]: 1
• Tootja: ERA

Tootja: MAGNETI MARELLI

• Installatsiooni pool: Sisselaskepool
• vajaminev tükihulk: 1
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Tootja: BREMI

• vajaminev tükihulk: 1
• Värv: must
• Montaaživiis: kruvitud
• Anduritüüp: passiivne andur, Induktiivandur
• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info 2: ilma kaablita
• Pistikukatte kuju: D-kuju
• Tootja: FAST

• Length [mm]: 76
• Number of connectors: 2
• Weight [kg]: 0.031
• Observe service information:
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Ehitusaasta kuni: 05.2009
• Height [mm]: 40
• Resistor [Ohm]: 1,150
• Number of connectors: 2
• Tootja: VERNET

• Installatsiooni pool: Väljalaskepool
• Mootori number kuni: 30853899
• Pistikukatte kuju: ovaalne
• Pistikkontaktide arv: 3
• Piirangutega toode/piirangu info 2: ilma kaablita, koos rõngastihendiga
• Tootja: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Mootorikood: M 271.956
• Ehitusaasta kuni: 05.2007
• Installatsiooni pool: Sisselaskepool
• vajaminev tükihulk: 1
• Sensor Type: Active sensor
• Number of pins: 3
• Voltage [V]: 12
• Nimetus: P™™RETEANDUR, KŽIGUKAST
• Tootja: MAX

• Length [mm]: 75.7
• Number of connectors: 2
• Weight [kg]: 0.031
• Observe service information:
• Nimetus: SW 10 92 4455
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of mounting bores: 1
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Mounting Type: Bolted
• Assy./disassy. by qualified personnel required!:
• Nimetus: ANDUR, VŽNTVOLL
• Tootja: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Mootorikood: M 271.956
• Ehitusaasta alates: 06.2007
• Installatsiooni pool: Sisselaskepool, Väljalaskepool
• Plokieraldus:
• vajaminev tükihulk: 1
• Length [mm]: 24
• Nimetus: Andur,Nukkvollipositsioon
• Tootja: MAX

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Nimetus: ANDUR, VŽNTVOLL
• Tootja: MEY

Tootja: FAST

• Number of pins: 2
• Tootja: FAE

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Tootja: KAMOKA

• Mootori number kuni: 30853899
• Installatsiooni pool: Väljalaskepool
• vajaminev tükihulk: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Tootja: BRM

Nimetus: CZUJNIK POO½ENIA WAKA ROZRZ. DB C KLASA W203 1,8 02-

• Kaal (kg): 0,06
• Garantii: 3 aastat garantii
• Nimetus: CE 53SKV004
• Tootja: ESEN SKV

• Number of connectors: 2
• Cable Length [mm]: 125
• Weight [kg]: 0.027
• Observe service information:
• Nimetus: šhenduskaabel, nukkvolli andur
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: M 271.956
• Ehitusaasta alates: 06.2007
• Installatsiooni pool: Sisselaskepool, Väljalaskepool
• vajaminev tükihulk: 1
• Plokieraldus:
• Nimetus: EP 1.953.387
• Tootja: EPS

• Anduritüüp: Hallsensor
• valikuliselt:
• Pistikkontaktide arv: 3
• Installatsiooni sügavus (mm): 24
• Tootja: ERA

• Korpusetüüp: koos korpusega
• Seerianumber: EPP-ME-005
• Tootja: NTY

• Mootori number kuni: 30853899
• Number of pins: 3
• Tootja: DELPHI
• Nimetus: DE SS11033

• Mootori number kuni: 30853899
• Length [mm]: 24
• Number of connectors: 3
• Weight [kg]: 0.029
• Supplementary Article/Info 2: with seal ring
• Nimetus: ANDUR,NUKKVOLLIPOSITSIOON
• Tootja: FEB

Käigukasti ID: .604-.608, .620-.624, .626-.628, .630, .631, .633-.638, .640, .641, .643, .644, .646-.649, .651-.655, .657-.658, .660, .662-.664, .667-.671, 716.601,.603 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Cable Length [mm]: 110
• Supplementary Article/Supplementary Info: with hose
• Supplementary Article/Info 2: with copper casing
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mootorikood: 271.956
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• Resistor [Ohm]: 1,150
• Tootja: VALEO
• Nimetus: VA 254008

• Height [mm]: 24.2
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Tootja: VERNET

Tootja: BOSCH