• Võtmekaugus: 19
• Pistikkontaktide arv: 2
• Keermemõõt: M14 x 1,5
• Nimetus: ANDUR, KšTUSETEMPERATUUR
• Tootja: MAX

• Kõrgus (mm): 50,6
• Kaal (kg): 0,027
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Tootja: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Pistikkontaktide arv: 2
• Tootja: DELLO AUTOMEGA

• Nimetus: Andur,Jahutusvedeliku temp.
• Tootja: MAG

• Mootorikood: M 111.982
• Korpusevärv: must
• Thread Size: M14x1,5
• Spanner Size: 19
• Nimetus: ANDUR, KšTUSETEMPERATUUR
• Tootja: EPS

• Jämedus/Tugevus (mm): 51
• Väliskeerme mõõde: M14 x 1,5
• Võtmekaugus: 19
• Ühenduste arv: 2
• Värv: must
• Kaal (kg): 0,02
• Tootja: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 006 153 98 28
• Number of pins: 3
• Connector Shape: oval
• Number of mounting bores: 2
• Pressure from [kPA]: 10
• Pressure to [kPA]: 261
• Fabrication Number: ECM-ME-001
• Tootja: NTY

• Jämedus/Tugevus (mm): 51
• Väliskeerme mõõde: M14 x 1,5
• Võtmekaugus: 19
• Ühenduste arv: 2
• Tootja: SWAG
• Nimetus: SW 10 93 7059

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fabrication Number: ECP-ME-006
• Number of pins: 3
• Tootja: NTY

• OE-numbri jaoks: 003 153 8628
• Tootja: TRUCKTEC

• Pistikkontaktide arv: 2
• Pistikukatte kuju: ristkülik
• Piirangutega toode/piirangu info 2: ilma kaablita
• Flantsiaugu läbimõõt (mm): 8
• OE-numbri jaoks: 5946 21, 004 153 90 28, 89615 05010
• Tootja: MEAT&DORIA

• Colour: black
• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 18.3
• Weight [kg]: 0.046
• Tootja: ERA

• Nimetus: DETONATSIOONIANDUR
• Tootja: BOS

Tootja: MAGNETI MARELLI

• Pistikkontaktide arv: 3
• Pistikukatte kuju: ovaalne
• Surve alates [kPA]: 10
• Surve kuni [kPA]: 261
• Kinnitusaukude hulk: 2
• OE-numbri jaoks: 006 153 98 28
• Tootja: MEAT&DORIA

• Keermemõõt: M14x1,5
• Värv: sinine
• Sõidukivarustus: Kliimaseadmega sõidukile
• Pistikkontaktide arv: 2
• Kaal (kg): 0,037
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Weight [kg]: 0.04
• Warranty: 3 years warranty
• Tootja: SKV GERMANY
• Nimetus: CE 17SKV496

• Pistikkontaktide arv: 3
• Surve alates [kPA]: 10
• Tootja: DELPHI
• Nimetus: DE PS10140

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: without cable
• Alternative Repair Kit: 550328
• Tootja: ERA

Tootja: FAST

• Jämedus/Tugevus (mm): 34,3
• Välisläbimõõt [mm]: 7,5
• Ühenduste arv: 3
• Kaal (kg): 0,015
• OE-numbri jaoks: 005 153 72 28
• Nimetus: ANDUR,KOMPRESSORIROHK
• Tootja: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mõõtepiirkond alates [kPa]: 15
• Mõõtepiirkond kuni [kPa]: 260
• mõõtepiirkond alates [V]: 0,4
• Mõõtepiirkond kuni [V]: 4,65
• Ühenduste arv: 3
• Tootja: VERNET

• Fabrication Number: EPP-ME-001
• Tootja: NTY

• Pistikkontaktide arv: 3
• Nimetus: Andur,ohuvotu rohk
• Tootja: MEY

• Ülekandeliinide arv: 4
• Lambda andur: Sond
• Tootja: KAMOKA

• Jämedus/Tugevus (mm): 34,3
• Välisläbimõõt [mm]: 7,5
• Ühenduste arv: 3
• Kaal (kg): 0,015
• OE-numbri jaoks: 005 153 72 28
• Nimetus: SW 10 93 8494
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pistikkontaktide arv: 3
• Surve alates [kPA]: 21
• Tootja: DELPHI
• Nimetus: DE PS10136

• Mootorikood: M 111.982
• vajaminev tükihulk: 1
• Lülitusrõhk [bar]: 2,5
• Pressure from [kPA]: 10
• Pressure to [kPA]: 265
• Output Voltage, from [V]: 0.314
• Output Voltage, up to [V]: 4.75
• Nimetus: EP 1.993.102
• Tootja: EPS

• Number of pins: 5
• Component Number: 120-08-073
• Tootja: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Housing Type: with housing
• Fabrication Number: EPP-ME-004
• Tootja: NTY

• Pistikkontaktide arv: 2
• Kaablipikkus (mm): 110
• Piirangutega toode/piirangu info: koos voolikuga
• Piirangutega toode/piirangu info 2: vaskhülsiga
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fabrication Number: EPP-ME-021
• Number of pins: 5
• Tootja: NTY

• Käigukasti liik: Käigukast
• Pikkus (mm): 24
• Ühenduste arv: 3
• Kaal (kg): 0,029
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: ANDUR,NUKKVOLLIPOSITSIOON
• Tootja: FEB

Käigukasti ID: .604-.608, .620-.624, .626-.628, .630, .631, .633-.638, .640, .641, .643, .644, .646-.649, .651-.655, .657-.658, .660, .662-.664, .667-.671, 716.601,.603 Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pistikkontaktide arv: 3
• Nimetus: ANDUR,NUKKVOLLIPOSITSIOON
• Tootja: DLP

• Pikkus (mm): 51
• Laius (mm): 50
• Välisläbimõõt [mm]: 17,8
• Ühenduste arv: 3
• Kaal (kg): 0,03
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• vajaminev tükihulk: 1
• Montaaživiis: kruvitud
• Pistikkontaktide arv: 3
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Nimetus: Andur,kompressorirohk
• Tootja: HEL

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• vajaminev tükihulk: 1
• Montaaživiis: kruvitud
• Pistikkontaktide arv: 3
• Piirangutega toode/piirangu info: koos tihendiga
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Nimetus: Andur,kompressorirohk
• Tootja: HEL

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 5
• Voltage [V]: 12
• Housing Type: with housing

• OE-numbri jaoks: 525428
• Tootja: KAMOKA

• Pikkus (mm): 51
• Laius (mm): 50
• Välisläbimõõt [mm]: 17,8
• Ühenduste arv: 3
• Kaal (kg): 0,03
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: SW 10 93 6432
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pistikkontaktide arv: 3
• Installatsiooni sügavus (mm): 24
• Nimetus: ANDUR,NUKKVOLLIPOSITSIOON
• Tootja: TRI

• Pistikkontaktide arv: 3
• Surve alates [kPA]: 15
• Surve kuni [kPA]: 260
• Tootja: FAE

• Lambda andur: Sond, Keere eelmääritud
• Installatsiooni pool: katalüsaatori ees
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Pikkus (mm): 650
• Pistikukatte kuju: ümar
• Ühendushulk: 4
• Keermemõõt: M18 x 1,5
• Kaablipikkus (mm): 650
• Ülekandeliinide arv: 4
• Kaal (kg): 0,11
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 5
• Plug Type: Male
• Voltage [V]: 12
• Kvaliteediklass: PJ
• Nimetus: Air flow sensor

• Lambda andur: Sond, Diagnoosisond, soojendatud
• Plokieraldus:
• Installatsiooni pool: katalüsaatori ees, pärast katalüsaatorit
• Ülekandeliinide arv: 4
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Nimetus: LAMBDA ANDUR
• Tootja: MAX
• Lisainfo: MGS-615

vasak/paremroolimine: vasakpoolse roolimise jaoks, parempoolse roolimise jaoks

• Lambda andur: Diagnoosisond
• Väljalaskesüsteem: pärast katalüsaatorit
• Voltage [V]: 12
• Length [mm]: 480
• Number of circuits: 4
• Weight [kg]: 0.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Tootja: SKV GERMANY
• Nimetus: CE 09SKV057

• Pistikkontaktide arv: 5
• Korpusetüüp: koos korpusega
• Tootja: JP GROUP
• Lisainfo: Air Mass Sensor

• Mootorikood: M 111.982
• Pinge [V]: 12
• Nimetus: OHUMASSIMOOTJA
• Tootja: MAX

• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 5
• Weight [kg]: 0.3
• Operating Mode: Electric
• Warranty: 3 years warranty
• Nimetus: CE 07SKV012
• Tootja: ESEN SKV

• Lambda andur: Sond
• Väljalaskesüsteem: katalüsaatori ees
• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Length [mm]: 830
• Number of circuits: 4
• Weight [kg]: 0.11
• Operating Mode: Electric
• Warranty: 3 years warranty
• Nimetus: CE 09SKV031
• Tootja: ESEN SKV

• Installatsiooni pool: katalüsaatori ees
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Ühendushulk: 4
• Pistikukatte kuju: ümar
• Keermemõõt: M18 x 1,5
• Pikkus (mm): 550
• Kaablipikkus (mm): 570
• vasak/paremroolimine: parempoolse roolimise jaoks
• Lambda andur: Sond, Keere eelmääritud
• Ülekandeliinide arv: 4
• Kaal (kg): 0,15
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda andur: Sond, soojendatud, Keere eelmääritud
• Installatsiooni pool: katalüsaatori ees
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Pikkus (mm): 720
• Pistikukatte kuju: ümar
• Pistikkontaktide arv: 4
• Kaal (kg): 0,117
• OE-numbri jaoks: 002 540 08 17
• Pistiku värv: must
• Keermemõõt: M18 x 1,5
• Kaablipikkus (mm): 720
• Ülekandeliinide arv: 4
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pinge [V]: 12
• Vastab originaalosa värvile: hall
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 3
• Piirangutega toode/piirangu info 2: ilma kaablita
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Nimetus: HE 6PU009121711
• Tootja: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Mootorikood: M 111.982
• Pistikkontaktide arv: 5
• Uus osa:
• Vana detaili tagastus mittevajalik:
• soovitatav remondimahtu suurendamine: Õhufilter
• Kaal (kg): 0,239
• Tootja: VEMO GERMANY
• Lisainfo: V20-72-0007 VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Length [mm]: 660
• Number of circuits: 4
• Weight [kg]: 0.14
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Tootja: SKV GERMANY
• Nimetus: CE 09SKV643

• Pinge [V]: 12
• Pistikkontaktide arv: 5
• Nimetus: OHUMASSIMOOTJA
• Tootja: MAX

• Pistikkontaktide arv: 3
• Korpusevärv: must
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info 2: ilma kaablita
• Tootja: FAE

• Takistus [oom]: 9
• Pikkus (mm): 900
• Ühendushulk: 4
• Ülekandeliinide arv: 4
• Kaablipikkus (mm): 900
• Lambda andur: soojendatud
• Nimetus: LAMBDA ANDUR
• Tootja: MAG

• Lambda andur: Sond, Keere eelmääritud
• Installatsiooni pool: katalüsaatori ees
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Keermemõõt: M18 x 1,5
• Ühendushulk: 4
• Pistikukatte kuju: ümar
• Pikkus (mm): 880
• Kaablipikkus (mm): 870
• Ülekandeliinide arv: 4
• Kaal (kg): 0,15
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mootorikood: M 111.982
• Lambda andur: Sond, Sõrmesensor, soojendatud, Keere eelmääritud
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Piirangutega toode/piirangu info: pressliidesega, surve-pressliidesega
• Pistikkontaktide arv: 4
• OE-numbri jaoks: V99760001
• Kaablipikkus (mm): 210
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Pikkus (mm): 350
• Väljalaskesüsteem: pärast katalüsaatorit
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: ees vasakul, katalüsaatori ees
• vasak/paremroolimine: vasakpoolse roolimise jaoks
• Lambda andur: Sond, Titaanandur, soojendatud
• Plokieraldus:
• Väljalaskesüsteem: eelkatalüsaatori jaoks
• Kaablipikkus (mm): 919
• Nimetus: LAMBDA ANDUR
• Tootja: DLP

• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 5
• Weight [kg]: 0.2
• Operating Mode: Electric
• Warranty: 3 years warranty
• Tootja: SKV GERMANY
• Nimetus: CE 07SKV122

• Installatsiooni pool: katalüsaatori ees
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Lambda andur: Titaanandur, soojendatud, Keere eelmääritud
• Piirangutega toode/piirangu info: pressliidesega, surve-pressliidesega
• Kaablipikkus (mm): 210
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda andur: Diagnoosisond, Titaanandur, soojendatud
• Mootorikood: M 111.982
• Kaablipikkus (mm): 380
• Nimetus: LAMBDA ANDUR
• Tootja: DLP

• Lambda andur: Sond, Diagnoosisond
• Installatsiooni pool: katalüsaatori ees, pärast katalüsaatorit
• Plokieraldus:
• Ülekandeliinide arv: 4
• Soovituslik vahetusintervall (km): 160 000
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Nimetus: LAMBDA ANDUR
• Tootja: BOS

vasak/paremroolimine: vasakpoolse roolimise jaoks, parempoolse roolimise jaoks

• Korpusetüüp: koos korpusega
• Pistikkontaktide arv: 5
• Korpuse materjal: Plastik
• Pistikukatte kuju: D-kuju
• Piirangutega toode/piirangu info 2: koos integreeritud võrega
• soovitatav remondimahtu suurendamine: Õhufilter
• Uus osa:
• Vana detaili tagastus mittevajalik:
• Tootja: TOPRAN HANS PRIES

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: ees paremal, katalüsaatori ees
• vasak/paremroolimine: parempoolse roolimise jaoks
• Lambda andur: Sond, Titaanandur, soojendatud
• Plokieraldus:
• Mootorikood: M 111.982
• Kaablipikkus (mm): 470
• Nimetus: LAMBDA ANDUR
• Tootja: DLP

Lisainfo: "Tootja: DELPHI
KLASA E (W210), 06.9
(kvaliteediklass: PJ)"

• Väljalaskesüsteem: eelkatalüsaatori jaoks
• Kvaliteet: OE
• Tootja piirang: DENSO
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 750
• Pistikkontaktide arv: 4
• Kaal (g): 93
• Brutokaal [g]: 140
• Tootja: DENSO
• Nimetus: DN DOX-0150
• Kvaliteediklass: Q

Lambda andur: Sond, soojendatud, Titaanandur, Keere eelmääritud, Bistabiilne andur Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

Tootja: MAGNETI MARELLI

• Mootorikood: M 111.982
• OE-numbri jaoks: A1110940148
• Pistikkontaktide arv: 5
• Tootja: MEAT&DORIA

• Kaal (kg): 0,02
• OE-numbri jaoks: A 004 153 32 28
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 3
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Kerenumber (VIN) alates: F136790/T000731, T054272
• valikuliselt:
• Korpusetüüp: koos korpusega
• Pistikkontaktide arv: 5
• Pistikute teostus: Male
• Korpusevärv: must
• Pinge [V]: 12
• soovitatav remondimahtu suurendamine: Õhufilter
• Nimetus: OHUMASSIMOOTJA
• Tootja: DLP

• Mootorikood: M 111.982
• Installatsiooni pool: pärast katalüsaatorit
• Lambda andur: Diagnoosisond
• Cable Length [mm]: 400
• Conductor Number: 4
• Lambda Sensor: Heated, Planar probe, Thread pre-greased
• Available as universal article as well, see article no.: 1.998.240
• Number of circuits: 4
• Nimetus: LAMBDA ANDUR
• Tootja: EPS

• Installatsiooni pool: pärast katalüsaatorit
• Lambda andur: Titaanandur
• Keermemõõt: M18 x 1,5
• Kaablipikkus (mm): 400
• Pistikkontaktide arv: 4
• Nimetus: Lambda andur
• Tootja: MEY

• OE-numbri jaoks: 0015407417, 15400717
• vasak/paremroolimine: vasakpoolse roolimise jaoks
• Väljalaskesüsteem: eelkatalüsaatori jaoks
• Kvaliteet: OE
• Tootja piirang: DENSO
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 900
• Pistikkontaktide arv: 4
• Kaal (g): 103
• Brutokaal [g]: 136
• Tootja: DENSO

Lambda andur: Sond, soojendatud, Titaanandur, Keere eelmääritud, Bistabiilne andur Lisainfo: "Tootja: DENSO
KLASA E (W211), 03.0
(kvaliteediklass: Q)"

• Korpusetüüp: koos korpusega
• Pistikkontaktide arv: 5
• Pistikute teostus: Male
• Korpusevärv: must
• Pinge [V]: 12
• soovitatav remondimahtu suurendamine: Õhufilter
• Nimetus: OHUMASSIMOOTJA
• Tootja: DLP

• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Korpusevärv: hall
• Piirangutega toode/piirangu info 2: ilma kaablita
• Tootja: FAE

• Lambda andur: Sond
• Installatsiooni pool: katalüsaatori ees
• vasak/paremroolimine: parempoolse roolimise jaoks
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 450
• ka universaaltootena saadav vaata toode-nr.: 0258986615
• Soovituslik vahetusintervall (km): 160 000
• Nimetus: LAMBDA ANDUR
• Tootja: BOS