Tootekategooriad
Filtrid Pidurid vedrustus/alusvanker Roolisüsteem Jahutus/kliima Elektrisüsteem Veokonks/lisad Jõuülekanne Väljalaskesüsteem Kere Süüte-/eelsüütesüsteem Mootor Klaasid/klaasipuhastus Valgustus Kütus Kabiinivarustus HooldusToode
Kirjeldus
Laoseis
Hind
(km-ga)
- Rims: for steel rims
- Length [mm]: 40
- Outer Diameter [mm]: 23
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 19
- Quality/ Grade: 10.9
- Spanner Size: 17
- Bolt Head-/Nut Design: Male Hex
-
Wheel Fastening: Ball seat A/
G - Material: Steel
- Surface: Zink flake coated
- Screw length below head [mm]: 20
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.047
- Observe service information:
- Tootja: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Rims: for steel rims
- Length [mm]: 40
- Outer Diameter [mm]: 23
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 19
- Quality/ Grade: 10.9
- Spanner Size: 17
- Bolt Head-/Nut Design: Male Hex
-
Wheel Fastening: Ball seat A/
G - Material: Steel
- Surface: Zink flake coated
- Screw length below head [mm]: 20
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.047
- Observe service information:
- Tootja: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Kogus pakendis: 50
-
Installatsiooni pool: esisild mõlemapoolselt,
Tagasild mõlemapoolselt - Pikkus (mm): 40
- Keermepikkus (mm): 19
-
Keermemõõt: M12 x 1,
5 - Kruvipea-/Mutriprofiil: Väliskuuskant
- Võtmekaugus: 17
- Veljed: metallvelje jaoks
- Tugevusklass: 10.9
- Tootja: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Kogus pakendis: 50
-
Installatsiooni pool: Esisild,
Tagasild - Pikkus (mm): 61
-
Keermemõõt: M12 x 1,
5 - Keermepikkus (mm): 20
- Kruvipea-/Mutriprofiil: Väliskuuskant
- Võtmekaugus: 17
- Tootja: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Rims: for light alloy rims
- Length [mm]: 61
- Outer Diameter [mm]: 22.2
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 20
- Quality/ Grade: 10.9
- Spanner Size: 17
- Bolt Head-/Nut Design: Male Hex
-
Wheel Fastening: Ball seat A/
G - Shaft Length [mm]: 20
- Material: Steel
- Surface: Zink flake coated
- Screw length below head [mm]: 40
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.075
- Observe service information:
- Tootja: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Rims: for light alloy rims
- Length [mm]: 61
- Outer Diameter [mm]: 22.2
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 20
- Quality/ Grade: 10.9
- Spanner Size: 17
- Bolt Head-/Nut Design: Male Hex
-
Wheel Fastening: Ball seat A/
G - Shaft Length [mm]: 20
- Material: Steel
- Surface: Zink flake coated
- Screw length below head [mm]: 40
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.075
- Observe service information:
- Tootja: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Kogus pakendis: 20
- for OE number: 124 400 0170
- Length [mm]: 39
-
Thread Size: M12 x 1,
5 - Tootja: TRUCKTEC
- Rims: for light alloy rims
- Length [mm]: 85
- Outer Diameter [mm]: 22.5
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 20
- Quality/ Grade: 10.9
- Spanner Size: 17
- Bolt Head-/Nut Design: Male Hex
-
Wheel Fastening: Ball seat A/
G -
Shaft Length [mm]: 19,
15 - Material: Steel
- Surface: Zink flake coated
-
Screw length below head [mm]: 40,
68 -
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.11
- Observe service information:
- Tootja: FEBI BILSTEIN
- Kogus pakendis: 20
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Rims: for light alloy rims
- Length [mm]: 85
- Outer Diameter [mm]: 22.5
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 20
- Quality/ Grade: 10.9
- Spanner Size: 17
- Bolt Head-/Nut Design: Male Hex
-
Wheel Fastening: Ball seat A/
G -
Shaft Length [mm]: 19,
15 - Material: Steel
- Surface: Zink flake coated
-
Screw length below head [mm]: 40,
68 -
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.11
- Observe service information:
- Tootja: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 49
- Outer Diameter [mm]: 23.9
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 24
- Quality/ Grade: 8.8
-
Spanner Size: 17,
19 -
Wheel Fastening: Ball seat A/
G - Material: Steel
- Surface: Chromed
- Screw length below head [mm]: 25
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.45
- Observe dimensions:
- Lockable: Lockable
- Observe service information:
- Tootja: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Laki Auto universaaltooted
TecDoc sõidukite kataloog
TecDoc veokite kataloog