• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Number of pins: 6
• Socket Width [mm]: 2.8
• Plug Type: Female
• Number of rows: 2
• Assy./disassy. by qualified personnel required!:
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for OE number: 036 906 051G
• Number of pins: 4
• Pressure from [kPA]: 10
• Pressure to [kPA]: 117
• Fabrication Number: ECM-VW-002
• Tootja: NTY

• Fabrication Number: ECM-AU-001
• Number of pins: 4
• Tootja: NTY

• for OE number: 03D 907 601
• Length [mm]: 60
• Supplementary Article/Info 2: with seal ring
• Fabrication Number: ECP-AU-004
• Tootja: NTY

• Mootorikood: CAVG
• Värv: hall
• for article number: 1.660.015K, 1.830.278K, 1.879.946
• Nimetus: EP 1.830.278
• Tootja: EPS
• Lisainfo: 1-830-278

• Mootorikood: CAVG
• Värv: hall
• for article number: 26.0015K, 7.3278K, 7.7946
• Tootja: FACET

• Supplementary Article/Info 2: without cable
• Socket colour: black
• Fabrication Number: ESS-VW-000
• Tootja: NTY

• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Nimetus: AB 120-08-015
• Tootja: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Sensor Type: NTC Sensor
• Voltage [V]: 12
• Length [mm]: 20
• Colour Coding: grey
• Tootja: MAGNETI MARELLI
• Nimetus: MM SPA111

• Number of pins: 4
• Guarantee: 3 years guarantee
• Pressure from [kPA]: 10
• Pressure to [kPA]: 11
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Tootja: SKV GERMANY
• Nimetus: CE 17SKV144

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Connector Shape: D Shape
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 30907601
• Sensor Type: Active sensor
• Tootja: KAMOKA

• Supplementary Article/Info 2: without cable
• Number of pins: 3
• for OE number: 090 307 601 E
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Tootja: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

Tootja: MAGNETI MARELLI

• General Information: Boost pressure sensor
• Tootja: VIKA

• Mootorikood: CAVG, CTHG
• Number of pins: 2
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• for OE number: 1205185
• Tootja: MEAT&DORIA

• General Information: Boost pressure sensor
• Tootja: VIKA

• Käigukasti liik: käigukasti jaoks, Topeltsiduriga käigukast
• Sõidukivarustus: Start-Stopp-funktsiooniga sõidukile
• Plokieraldus:
• Number of pins: 4
• Tootja: JPN

• Thread Size: M 22x1,5
• Number of pins: 2
• Housing Colour: grey
• Tootja: FAE

• Hulk: 1
• Weight [kg]: 0.48
• Number of connectors: 2
• Colour: black
• General Information: Knock sensor
• Tootja: VIKA

• Colour: black
• Number of pins: 2
• Weight [kg]: 0.058
• Tootja: ERA

• Mootorikood: CAVG, CTHG
• Ehitusaasta alates: 05.2012
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 4
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Tootja: SKV GERMANY
• Nimetus: CE 17SKV348

• Number of pins: 3
• Connector Shape: D Shape
• Number of mounting bores: 1
• Supplementary Article/Supplementary Info: with gasket/seal
• for OE number: 030907601E
• Tootja: DELLO AUTOMEGA

• Mootorikood: CAVG, CTHG
• Number of connectors: 3
• Housing Colour: grey
• Supplementary Article/Info 2: with cable
• Tootja: JP GROUP
• Lisainfo: Sensor, camshaft position

• Height [mm]: 24.4
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Tootja: VERNET

• Connector Shape: D Shape
• Sensor Type: NTC Sensor
• Number of pins: 4
• Housing material: GRP (Glass fibre Reinforced Plastic), PBT
• Tootja: TOPRAN

Supplementary Article/Info 2: with seal ring, with integrated air temperature sensor General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Mootorikood: CAVG, CTHG
• Number of pins: 3
• Connector Shape: D Shape
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 24.3
• Quality: OE EQUIVALENT
• for OE number: 0986280432
• Tootja: MEAT & DORIA

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Tootja: FAE ELEKTRYKA

• Mootorikood: CAVG
• vajaminev tükihulk: 1
• Korpusevärv: must
• Nimetus: EP 1.957.144
• Tootja: EPS

• vajaminev tükihulk: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Tootja: BREMI

• Number of pins: 4
• Plug Type: Female
• Number of circuits: 4
• Cable insulation material: Silicone
• Material: CuSn (copper-tin)
• Cable Length [mm]: 250
• Cable cross-section from [mm²]: 0.5
• Cable cross-section to [mm²]: 0.5
• Tootja: 3RG

• Number of pins: 4
• Tootja: JPN

• Mootorikood: CAVG
• vajaminev tükihulk: 1
• Korpusevärv: must
• Tootja: FACET

• Diameter [mm]: 26
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Spring Design: Retaining Spring
• Length [mm]: 20
• Housing Colour: blue
• Height [mm]: 57
• Colour: grey
• Number of connectors: 2
• Tootja: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mootorikood: CAVG
• Number of pins: 3
• Tootja: DELPHI
• Nimetus: DE SS10773-12B1
• Kvaliteediklass: PJ

Lisainfo: "Tootja: DELPHI
BORA (1J2), 10.98-09
(kvaliteediklass: PJ)"

• vajaminev tükihulk: 1
• Tootja: BREMI

• Mootorikood: CTHG, CAVG
• Number of pins: 2
• Colour: black
• Material: Plastic
• Tootja: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Measuring Range from [kPa]: 11
• Measuring Range to [kPa]: 307
• Measuring Range from [V]: 0.25
• Measuring Range to [V]: 4.75
• Number of connectors: 4
• Tootja: VERNET

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Tootja: NTY
• Nimetus: NTY ESL-SK-000

• Fitting Depth [mm]: 24.3
• Number of connectors: 3
• Number of mounting bores: 1
• Rated Voltage [V]: 12
• Operating temperature from [°C]: -40
• Operating temperature to [°C]: 125
• Sensor Type: Hall Sensor
• Connector Shape: D Shape
• Colour: black
• Nimetus: SN CMP167.02
• Tootja: SNR

Kerenumber (VIN): [5J-9A509 526;], [5J-A3006 001;], [5J-AB500 001;], [5J-AK500 001;], [8P-6A066 001;], [8P-6B005 501;]

• Ühendus/klemm: vajadusel kohandada pistikühendus
• Oxygen Sensor: Switching-type Oxygen Sensor, Heated
• Thread Size: M18x1,5
• Cable Length [mm]: 750
• Number of circuits: 4
• Number of pins: 4
• Spanner Size: 22
• Assy./disassy. by qualified personnel required!:
• Tootja: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Length [mm]: 60
• Width [mm]: 40
• Thickness [mm]: 22
• Number of connectors: 3
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• vajaminev tükihulk: 1
• Sõidukitüüp: A1
• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: oval
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 6PG013114301
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Mootorikood: CAVG
• Length [mm]: 62
• Width [mm]: 54
• Height [mm]: 40
• Colour: black
• Number of connectors: 4
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.48
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 60
• Width [mm]: 40
• Thickness [mm]: 22
• Number of connectors: 3
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• Nimetus: SW 30 94 4382
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Tootja: BOSCH
• Nimetus: BS 0261231146

• Number of pins: 2
• Tootja: DELPHI
• Nimetus: DE AS10169

• Number of circuits: 3
• Plug Type: Butt Joint
• Cable Length [mm]: 200
• Wire cross-section [mm²]: 0,5
• Tootja: METZGER

• General Information: Boost pressure sensor
• Tootja: BORSEHUNG

• vajaminev tükihulk: 1
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• Tootja: VALEO

• Mootorikood: CAVG
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Tootja: FACET

• Mootorikood: CAVG
• vajaminev tükihulk: 1
• Tootja: FACET

• Mootorikood: CAVG
• Tootja: BOSCH
• Nimetus: BS 0281002976

• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Pressure from [kPA]: 10
• Pressure to [kPA]: 117
• for OE number: 03C906051F
• Tootja: MEAT & DORIA

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Tootja: KAMOKA

• Mootorikood: CAVG
• Installatsiooni pool: Pidurivõimendi
• Sõidukivarustus: Start-Stopp-funktsiooniga sõidukile
• Supplementary Article/Info 2: with integrated air temperature sensor
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Tootja: BOSCH

• Number of pins: 3
• Cable Length [mm]: 500
• Cable cross-section from [mm²]: 0.5
• Cable cross-section to [mm²]: 0.5
• Supplementary Article/Supplementary Info: with shrink/solder connector
• for OE number: 4D0971993
• Tootja: MEAT&DORIA

• vajaminev tükihulk: 1
• Sõidukitüüp: A1
• Sensor Type: Hall Sensor
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 6PU013122671
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 4
• Pressure from [kPA]: 20
• Pressure to [kPA]: 300
• Tootja: VDO

• Mootorikood: CAVG, CTHG
• Number of pins: 2
• Colour: black
• Tootja: VDO

• Mootorikood: CAVG
• vajaminev tükihulk: 1
• Tootja: EPS

• Number of pins: 4
• Pressure from [kPA]: 20
• Pressure to [kPA]: 300
• Tootja: FAE

• Lambda andur: Diagnoosisond
• Installatsiooni pool: pärast katalüsaatorit
• Cable Length [mm]: 540
• Oxygen Sensor: Planar Sensor, Heated
• Nimetus: DE ES21476-12B1
• Tootja: DELPHI

Tootja: NRF KLIMATYZACJA

• Number of pins: 4
• Pressure from [kPA]: 13
• Tootja: DELPHI
• Nimetus: DE PS10161

• Number of pins: 4
• Tootja: DELPHI

• Sensor Type: Hall Sensor
• Tootja: FAE

• Mootorikood: CAVG, CTHG
• Sensor Type: Piezoelectric Sensor
• Number of pins: 4
• Tootja: MEYLE

Supplementary Article/Info 2: with integrated air temperature sensor, with seal ring

• Number of pins: 4
• Pressure from [kPA]: 10
• Pressure to [kPA]: 115
• Tootja: VDO

• Mounting Type: Bolted
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 6PP358152251
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.06
• Always compare old and new part (in particular OE No.):
• Tootja: SKV GERMANY
• Nimetus: CE 17SKV588

• General Information: Fuel pressure sensor
• Tootja: BORSEHUNG

• vajaminev tükihulk: 1
• Sõidukitüüp: A1
• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: oval
• Quantity: 1
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 6PG009108561
• Tootja: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 12060-00-3; Lead titanium trioxide, 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Thread Size: M 10
• Thread Pitch [mm]: 1
• Supplementary Article/Info 2: High Pressure Side
• Thread Length [mm]: 15
• Spanner Size: 27
• Number of pins: 3
• Mounting Type: Bolted
• Housing Colour: brown
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Fuel Mixture Formation: Direct Injection
• Connector Shape: D Shape
• Tootja: TOPRAN