Tootekategooriad
Filtrid Pidurid vedrustus/alusvanker Roolisüsteem Jahutus/kliima Elektrisüsteem Veokonks/lisad Jõuülekanne Väljalaskesüsteem Kere Süüte-/eelsüütesüsteem Mootor Klaasid/klaasipuhastus Valgustus Kütus Kabiinivarustus HooldusToode
Kirjeldus
Laoseis
Hind
(km-ga)
- General Information: Round head screw
- Tootja: BORSEHUNG
-
Fitting Position: Cylinder Head Cover,
Exhaust Side -
Base body material: GRP
(Glass fibre Reinforced Plastic) - Supplementary Article/Info 2: with seal ring
- Tootja: TOPRAN
Seal Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Installatsiooni pool: Väljalaskepool
- Engine Timing: Timing Chain
- Inner Diameter [mm]: 11
- Number of Teeth: 36
- Outer Diameter [mm]: 91.5
- Height [mm]: 10.7
- Material: Steel
- Tootja: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fabrication Number: EFR-
VW- 002 - Tootja: NTY
-
Nimetus: NTY EFR-
VW- 002
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- for OE number: 03G 105 021 C
- Thickness [mm]: 10
- Inner Diameter [mm]: 35
- Fitting Position: frontal sided
- Outer Diameter [mm]: 48
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Tootja: KAMOKA
-
Operating Mode: Electric-
hydraulic - Valve Type: for inlet valves
- Number of pins: 2
- Guarantee: 3 years guarantee
- Weight [kg]: 0.2
- Always compare old and new part (in particular OE No.):
- Tootja: SKV GERMANY
- Nimetus: CE 39SKV052
-
Mootorikood: CAVG,
CTHG - Tootja: MAGNETI MARELLI
- soovitava lisavarustuse artiklinumber: TC0105K
- Tootja: BGA
- Hulk: 1
- General Information: Oil control valve for VVT
- Tootja: VIKA
-
Sõidukitüüp: A1,
A1 Sportback - Plokieraldus:
- Number of pins: 2
- Pin Shape: Flat
- Plug Type: Male
- Length [mm]: 96
- Width [mm]: 28
- Height [mm]: 28
- Tootja: GATES
- Fitting Position: Cylinder Head
- Weight [kg]: 0.64
-
for OE number: 06H103144J,
06H103144K -
for article number: 120-
09- 056 - Assy./disassy. by qualified personnel required!:
- Tootja: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Operating Mode: Electric
- SVHC: No SVHC present!
- Tootja: INA
- Nimetus: LU 427005610
-
Operating Mode: Electric-
hydraulic - Number of pins: 2
- Connector Shape: D Shape
-
Supplementary Article/Supplementary Info: with gasket/
seal - Observe the vehicle manufacturer specifications:
- Tootja: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fabrication Number: RKZ-
AU- 005 - Number of Teeth: 36
- Fitting Position: Intake Side
- Operating Mode: Hydraulic
- Outer Diameter [mm]: 81
- Tootja: NTY
-
Nimetus: NTY RKZ-
AU- 005
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Mootorikood: CAVG,
CTHG - Plokieraldus:
- Number of pins: 2
- Supplementary Article/Info 2: with seal ring
-
Operating Mode: Electric-
hydraulic - Connector Shape: oval
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Guarantee: 3 years guarantee
- for OE number: 03C 906 455 A
- Operating Mode: Electric
- Number of pins: 2
- Supplementary Article/Info 2: with seal ring
- Tootja: AT AUTOTEILE GERMANY
General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
- Observe the vehicle manufacturer specifications:
-
Supplementary Article/Info 2: Control Unit/
Software must be trained/ updated - Always compare old and new part (in particular OE No.):
- Tootja: VDO
- Number of Teeth: 36
- Fitting Position: Intake Side
- Required quantity: 1
- Engine Timing: Timing Chain
- Guarantee: 3 years guarantee
- Weight [kg]: 0.69
- Always compare old and new part (in particular OE No.):
- Tootja: SKV GERMANY
- Nimetus: CE 39SKV527
- for OE number: 03C906455A
- Tootja: MEAT&DORIA
- Fitting Position: Intake Side
- Number of Teeth: 36
- Assy./disassy. by qualified personnel required!:
- Supplementary Article/Info 2: Requires special tools for mounting
- Tootja: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Operating Mode: Hydraulic
- Fitting Position: Intake Side
- Number of Teeth: 36
- Supplementary Article/Supplementary Info: with camshaft gear
- Driven Units: Camshaft
- Engine Timing: Timing Chain
- Chain Type: Simplex
- Consult accessories list for recommended additional repairs:
- Tootja: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Mootorikood: CAVG
- Tootja: FAI
-
Mootorikood: CAVG,
CTHG - Plokieraldus:
- Valve Type: Control Valve
- Operating Mode: Electric
- Voltage [V]: 12
- Tootja: PIERBURG
- Number of connectors: 2
- Valve Type: Solenoid Valve
- Weight [kg]: 0.179
- Tootja: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Intake Side
- Outer Diameter [mm]: 81
- Supplementary Article/Info 2: without screw
- Number of Teeth: 36
- Tootja: KAMOKA
-
Operating Mode: Electric-
hydraulic - Valve Type: for inlet valves
- Tootja: HEPU
- Fitting Position: Intake Side
- Number of Teeth: 36
- Tootja: JPN
- Fitting Position: Intake Side
- Outer Diameter [mm]: 81
- Number of Teeth: 36
- Tootja: DR MOTOR
- Nimetus: DRM 0752
- Fitting Position: Intake Side
- General Information: camshaft; intake
- Tootja: BORSEHUNG
- Fitting Position: Exhaust Side
- General Information: camshaft; exhaust
- Tootja: BORSEHUNG
- Outer Diameter [mm]: 81
- Number of Teeth: 36
- Weight [kg]: 0.709
- Supplementary Article/Info 2: with screw
- Observe service information:
- Tootja: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Outer Diameter [mm]: 81
- Number of Teeth: 36
- Weight [kg]: 0.626
- Observe service information:
- Tootja: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Mootorikood: CAVG,
CTHG - Plokieraldus:
- Fitting Position: Exhaust Side
- Supplementary Article/Info 3: for cast shaft
- Tootja: KOLBENSCHMIDT
- Number of Teeth: 36
- Fitting Position: Intake Side
- for OE number: 03C 109 088 E
- Guarantee: 3 years guarantee
- Supplementary Article/Info 2: without screw
- Operating Mode: Hydraulic
- Tootja: AT AUTOTEILE GERMANY
General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
-
Mootorikood: CAVG,
CTHG - Plokieraldus:
- Number of Teeth: 36
- Tootja: KOLBENSCHMIDT
- Mootorikood: CAVG
- Material: Cast Steel
- Valve Type: for inlet valves
- Tootja: FAI
- Operating Mode: Hydraulic
- Number of Teeth: 36
- Supplementary Article/Info 2: without screw
- Tootja: METZGER
- Number of Teeth: 54
- Supplementary Article/Supplementary Info: with accessories
- Fitting Position: Intake Side
- Tootja: HEPU
- Mootorikood: CAVG
- Fitting Position: Exhaust Side
- Material: Steel
- Tootja: FEDERAL MOGUL
- Mootorikood: CAVG
- Fitting Position: Intake Side
- Material: Steel
- Tootja: FEDERAL MOGUL
- Fitting Position: Intake Side
- Number of bolts/screws: 1
- Number of Teeth: 36
- Tootja: SKF
- Installatsiooni pool: Sisselaskepool
- vajaminev tükihulk: 1
- Drive Type: Chain
- Operating Mode: Hydraulic
- Number of Teeth: 36
- SVHC: No SVHC present!
- Tootja: INA
Laki Auto universaaltooted
TecDoc sõidukite kataloog
TecDoc veokite kataloog