Tootekategooriad
Filtrid Pidurid vedrustus/alusvanker Roolisüsteem Jahutus/kliima Elektrisüsteem Veokonks/lisad Jõuülekanne Väljalaskesüsteem Kere Süüte-/eelsüütesüsteem Mootor Klaasid/klaasipuhastus Valgustus Kütus Kabiinivarustus HooldusToode
Kirjeldus
Laoseis
Hind
(km-ga)
- Installatsiooni pool: stirnseitig
- Mootorikood: CNHA
- Height [mm]: 10
- Outer Diameter [mm]: 47
- Inner Diameter [mm]: 32
-
Material: PTFE
(polytetrafluoroethylene) - for OE number: 03L103085C
- Rotation Direction: Clockwise rotation
- Tootja: FAI
- Nimetus: FAI OS1663
- Lisainfo: OS1663 FAI
- Inner Diameter [mm]: 40
- Height [mm]: 7
- Outer Diameter [mm]: 55
- Rotation Direction: Clockwise rotation
-
Material: FPM
(fluoride rubber) - Fitting Position: frontal sided
- Weight [kg]: 0.02
- Tootja: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Installatsiooni pool: stirnseitig
- Inner Diameter [mm]: 32
- Width [mm]: 10
- Outer Diameter [mm]: 47
- for OE number: 03L103085C
-
Nimetus: Volli rongastihend,
Nukkvoll - Tootja: DRM
Brief Information: Always compare old and new part (in particular OE No.)
- Fitting Position: Front
- Height [mm]: 10
- Outer Diameter [mm]: 32
- Inner Diameter [mm]: 47
- Tootja: BGA USZCZELKI
Material: NBR (nitrile butadiene rubber), PTFE (polytetrafluoroethylene)
- Installatsiooni pool: stirnseitig
- Mootorikood: CNHA
-
Material: FPM
(fluoride rubber) - Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: A
-
Swirl Type: Right-
hand Twist -
Nimetus: VOLLI RONGASTIHEND,
NUKKVOLL - Tootja: REI
- Installatsiooni pool: stirnseitig
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: AW
-
Swirl Type: Right-
hand Twist - Dust Cover: without dust lip
- Observe mounting information:
- Tootja: ELRING
- Lisainfo: 897.690 ELRING
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease
- Installatsiooni pool: stirnseitig
- Fitting Position: Cylinder Head
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Crankcase
-
Fabrication Number: NUP-
AU- 001 - Tootja: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Installatsiooni pool: stirnseitig
- Mootorikood: CNHA
-
Material: PTFE
(polytetrafluoroethylene) -
Nimetus: SIMER. WAU VW GOLF 2.0TDI 07-
- Tootja: MAX
- Fitting Position: frontal sided
-
Material: PTFE
(polytetrafluoroethylene) - Supplementary Article/Info 2: with flange
- Observe service information:
-
Fabrication Number: NUP-
VW- 026 - Tootja: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Mootorikood: CNHA
- Plokieraldus:
- Installatsiooni pool: stirnseitig
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
-
Swirl Type: Right-
hand Twist -
Nimetus: VOLLI RONGASTIHEND,
NUKKVOLL - Tootja: AJU
- Installatsiooni pool: kastipoolselt
- for manufacturer number: 8707038
- Tootja: KAMOKA
- Mootorikood: CNHA
- Fitting Position: frontal sided
- Outer Diameter 1 [mm]: 136.3
- for OE number: 04L103151
- Height 1 [mm]: 14.7
- Height 2 [mm]: 46.7
- Supplementary Article/Info 2: with flange
- Outer Diameter 2 [mm]: 217.5
- Inner Diameter 1 [mm]: 35
-
Nimetus: SIMER. WAU VW GOLF 2.0TDI 07-
- Tootja: COT
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)
- Fitting Position: frontal sided
- General Information: Oil sealing flange for crankshaft; front
- Tootja: VIKA
- Fitting Position: frontal sided
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 136
-
Swirl Type: Right-
hand Twist - Radial Shaft Seal Design: SP
-
Nimetus: Volli rongastihend,
Vntvoll - Tootja: DRM
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 136
-
Material: PTFE
(polytetrafluoroethylene) - Fitting Position: frontal sided
- Weight [kg]: 0.4
- Supplementary Article/Info 2: with flange
- Observe service information:
-
Nimetus: VOLLI RONGASTIHEND,
VNTVOLL - Tootja: FEB
- Lisainfo: FE46749
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Installatsiooni pool: stirnseitig
- Mootorikood: CNHA
-
Material: PTFE
(polytetrafluoroethylene) - Supplementary Article/Info 2: with flange
-
Nimetus: VOLLI RONGASTIHEND,
VNTVOLL - Tootja: REI
- Fitting Position: frontal sided
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 136
-
Swirl Type: Right-
hand Twist - Supplementary Article/Info 2: without mounting sleeve
- Housing Type: with housing
-
Material: PTFE
(polytetrafluoroethylene) -
Nimetus: VOLLI RONGASTIHEND,
VNTVOLL - Tootja: MEY
- Installatsiooni pool: stirnseitig
- Inner Diameter [mm]: 35
- Radial Shaft Seal Design: SP
-
Swirl Type: Right-
hand Twist -
Material: PTFE
(polytetrafluoroethylene) - Housing Type: with housing
- Dust Cover: with dust lip
- Observe mounting information:
- Tootja: ELRING
Installation Information: Mounting dry and without any additional oil and grease
- Installatsiooni pool: stirnseitig
- Mootorikood: CNHA
- Housing Type: with housing
- Inner Diameter [mm]: 135
- Outer Diameter [mm]: 215
- Height [mm]: 54
-
Swirl Type: Right-
hand Twist -
Material: PTFE
(polytetrafluoroethylene) -
Nimetus: VOLLI RONGASTIHEND,
VNTVOLL - Tootja: AJU
- Installatsiooni pool: kastipoolselt
- Mootorikood: CNHA
-
Material: PTFE
(polytetrafluoroethylene) - Supplementary Article/Info 2: with flange
-
Nimetus: VOLLI RONGASTIHEND,
VNTVOLL - Tootja: REI
- Fitting Position: transmission sided
- Inner Diameter [mm]: 85
- Outer Diameter [mm]: 131
-
Swirl Type: Left-
hand Twist - Supplementary Article/Info 2: with mounting sleeve
- Housing Type: with housing
-
Material: PTFE
(polytetrafluoroethylene) -
Nimetus: VOLLI RONGASTIHEND,
VNTVOLL - Tootja: MEY
- Mootorikood: CNHA
- Fitting Position: transmission sided
- Outer Diameter 1 [mm]: 130.9
- Height 1 [mm]: 15.8
-
Swirl Type: Left-
hand Twist -
Supplementary Article/Info 2: with flange,
with mounting sleeve - Outer Diameter 2 [mm]: 170
- Inner Diameter 1 [mm]: 85
- Tootja: CORTECO
- Nimetus: CO 20037305
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)
- Mootorikood: CNHA
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 136.3
- Fitting Position: frontal sided
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Installatsiooni pool: kastipoolselt
- Mootorikood: CNHA
- Housing Type: with housing
- Inner Diameter [mm]: 130
- Outer Diameter [mm]: 168
- Height [mm]: 16
-
Swirl Type: Left-
hand Twist -
Material: PTFE
(polytetrafluoroethylene) -
Nimetus: VOLLI RONGASTIHEND,
VNTVOLL - Tootja: AJU
- Installatsiooni pool: kastipoolselt
- Inner Diameter [mm]: 85
- Radial Shaft Seal Design: IWD
-
Swirl Type: Left-
hand Twist -
Material: PTFE
(polytetrafluoroethylene) - Housing Type: with housing
- Observe mounting information:
- Supplementary Article/Info 2: with mounting sleeve
- Tootja: ELRING
Installation Information: Mounting dry and without any additional oil and grease
Laki Auto universaaltooted
TecDoc sõidukite kataloog
TecDoc veokite kataloog