Lisainfo: QB11667K

• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Length [mm]: 16
• Thread Size: M6x1
• Thread Type: with external thread
• Spanner Size: Torx-30
• Tootja: QUICK BRAKE
• Lisainfo: M6x1 16,0mm Torx-30 2tk

• Installatsiooni pool: Tagasild
• Brake System: LUCAS
• Tootja: JP GROUP A/S
• Lisainfo: Accessory Kit, disc brake pads

• Brake Type: Disc Brake
• Fitting Position: Front Axle
• Tootja: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Length [mm]: 16.1
• Thread Size: M6x1
• Material: Steel
• Surface: Chrome-(VI)- free passivation
• Bolt Head-/Nut Design: Female Torx
• Available as universal article as well, see article no.: TPM1000
• Weight [kg]: 0.003
• Tootja: TEXTAR

• Fitting Position: Front Axle
• for article number: V10-8182
• Warning Contact Length [mm]: 250
• Brake Type: Disc Brake
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: Tagasild
• Pidurisüsteem: TRW
• Nimetus: QB 109-1610
• Tootja: QUICK BRAKE
• Lisainfo: 109-1610 QB

• Installatsiooni pool: Tagasild
• Brake System: Lucas
• Tootja: AUTOFREN SEINSA
• Nimetus: SE D4-2548A

• Installatsiooni pool: Tagasild
• Brake System: Lucas
• Weight [kg]: 0.039
• Tootja: TOMEX C

• Fitting Position: Front Axle
• Brake System: Ate.
• Tootja: AUTOFREN SEINSA
• Nimetus: SE D4-2464A

• Installatsiooni pool: Tagasild
• PR-numbri jaoks: 1KE
• Brake System: LUCAS/TRW
• Weight [kg]: 0.04
• Tootja: ABS

• Installatsiooni pool: Esisild
• PR-numbri jaoks: 1LU
• Kogus pakendis: 2
• Brake Type: Disc Brake
• Length [mm]: 555
• Number of wear indicators [per axle]: 2
• Tootja: BREMBO HAMULCE

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-AU-003
• Tootja: NTY

• Fitting Position: Front Axle Left
• Fabrication Number: HTO-AU-010
• Outer Diameter [mm]: 320
• for brake disc diameter [mm]: 280
• paired article number: HTO-AU-011
• Tootja: NTY

• Fitting Position: Front Axle Right
• Fabrication Number: HTO-AU-011
• Outer Diameter [mm]: 320
• for brake disc diameter [mm]: 280
• paired article number: HTO-AU-010
• Tootja: NTY

• Installatsiooni pool: Esisild
• Pidurisüsteem: Brembo
• pidurikettaläbimõõdule (mm): 380
• pidurikettajämedusele (mm): 38
• Kogus pakendis: 2
• Length 1 [mm]: 396
• Brake Type: Disc Brake
• Nimetus: DE LZ0284
• Tootja: DELPHI

• Installatsiooni pool: Tagasild
• Manufacturer Restriction: TRW
• Tootja: TRW
• Kvaliteediklass: Q
• Nimetus: Brake pads fitting kit

SVHC: No information available, please contact the manufacturer!

• Installatsiooni pool: Esisild
• Piduriliik: Ketaspidur
• Pidurisüsteem: Brembo
• pidurikettaläbimõõdule (mm): 380
• pidurikettajämedusele (mm): 38
• Kogus pakendis: 2
• Length [mm]: 396
• Supplementary Article/Supplementary Info: Axle Kit
• Tootja: QUICK BRAKE
• Nimetus: QB WS0371A

• Fitting Position: Front Axle Right
• Outer Diameter [mm]: 320
• paired article number: 131-07-191
• Article number of recommended accessories: 231-03-014
• for brake disc diameter [mm]: 280
• Assy./disassy. by qualified personnel required!:
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle Left
• Outer Diameter [mm]: 320
• paired article number: 131-07-192
• Article number of recommended accessories: 231-03-014
• for brake disc diameter [mm]: 280
• Assy./disassy. by qualified personnel required!:
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle Left
• for OE number: 8E0615311A
• Material: Sheet Steel
• for brake disc diameter [mm]: 280
• Diameter 1 [mm]: 320
• Tootja: KAMOKA

• Fitting Position: Front Axle Right
• for OE number: 8E0615312A
• Material: Sheet Steel
• for brake disc diameter [mm]: 280
• Diameter 1 [mm]: 320
• Tootja: KAMOKA

• Installatsiooni pool: Tagasild
• Pidurisüsteem: TRW
• Kvaliteediklass: PJ
• Nimetus: Brake pads fitting kit

• Installatsiooni pool: vasakul, Esisild
• Diameter 1/Diameter 2 [mm]: 320
• Material: Sheet Steel
• for brake disc diameter [mm]: 280
• Fitting Position: Front Axle Left
• Nimetus: CFD 610214
• Tootja: DACO

• Installatsiooni pool: paremal, Esisild
• Diameter 1/Diameter 2 [mm]: 320
• Material: Sheet Steel
• for brake disc diameter [mm]: 280
• Fitting Position: Front Axle Right
• Nimetus: CFD 610215
• Tootja: DACO

• Fitting Position: Front Axle Left
• Manufacturer Restriction: ATE, Girling, Teves
• for brake disc diameter [mm]: 280
• Tootja: YSPARTS

• Installatsiooni pool: Tagasild
• Pidurisüsteem: TRW
• Tootja: METZGER

• Fitting Position: Front Axle Left
• paired article number: 131-07-194
• for brake disc diameter [mm]: 345
• Assy./disassy. by qualified personnel required!:
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle Right
• paired article number: 131-07-193
• for brake disc diameter [mm]: 345
• Assy./disassy. by qualified personnel required!:
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: esisild paremal
• Piduriseade: keraamikapiduriga sõidukile
• Length [mm]: 370
• Brake Type: Disc Brake
• Tootja: BOSCH

• Installatsiooni pool: esisild paremal
• Diameter 1 [mm]: 320
• Material: Sheet Steel
• for brake disc diameter [mm]: 280
• paired article number: 11054
• Weight [kg]: 0.32
• Tootja: ABS

• Fitting Position: Front Axle Right
• for OE number: 8E0615312C
• Material: Sheet Steel
• for brake disc diameter [mm]: 345
• Tootja: KAMOKA

• Fitting Position: Front Axle Left
• for OE number: 8E0615311C
• Material: Sheet Steel
• for brake disc diameter [mm]: 345
• Tootja: KAMOKA

• Installatsiooni pool: esisild vasakul
• Piduriseade: keraamikapiduriga sõidukile
• Length [mm]: 395
• Brake Type: Disc Brake
• Tootja: BOSCH

• Fitting Position: Rear Axle Right
• for brake disc diameter [mm]: 302
• Fabrication Number: HTO-AU-001
• paired article number: HTO-AU-000
• Tootja: NTY

• Installatsiooni pool: Tagasild
• Pidurisüsteem: TRW
• Kogus pakendis: 4
• Tootja: DELPHI LOCKHEED HAMULCE
• Nimetus: DE LX0383
• Kvaliteediklass: PJ

Lisainfo: "Tootja: DELPHI
VW TRANSPORTER T5
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left
• Material: Sheet Steel
• for brake disc diameter [mm]: 345
• Fabrication Number: HTO-AU-006
• paired article number: HTO-AU-007
• Tootja: NTY

• Fitting Position: Front Axle Right
• Material: Sheet Steel
• for brake disc diameter [mm]: 345
• Fabrication Number: HTO-AU-007
• paired article number: HTO-AU-006
• Tootja: NTY

• Ehitusaasta alates: 05.2006
• for OE number: 8E0927803B
• Cable Length [mm]: 990
• Sensor Type: Passive sensor
• Fitting Position: Front Axle
• Tootja: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Front Axle
• Length [mm]: 975
• Voltage [V]: 12
• Weight [kg]: 0.15
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Tootja: ENERGY

• Installatsiooni pool: Esisild
• Tootja: DELLO AUTOMEGA

• Installatsiooni pool: Tagasild paremal
• Sensor Type: Hall Sensor
• Tootja: JP GROUP
• Lisainfo: Sensor, wheel speed

• Ehitusaasta alates: 05.2006
• Cable Length [mm]: 1,190
• Sensor Type: Passive sensor
• Fitting Position: Rear Axle Left
• Tootja: KAMOKA

• Fitting Position: Front Axle Left, Front Axle Right
• Sensor Type: Inductive Sensor
• Lisainfo: ABS sensor, front, left/right

• Fitting Position: Rear Axle Left
• for brake disc diameter [mm]: 302
• Fabrication Number: HTO-AU-000
• paired article number: HTO-AU-001
• Tootja: NTY

• Fitting Position: Front Axle
• Cable Length [mm]: 1,005
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Assy./disassy. by qualified personnel required!:
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Ehitusaasta alates: 11.2005
• Installatsiooni pool: Tagasild
• Tootja: ATE

• Installatsiooni pool: Tagasild vasakul
• Hulk: 1
• Sensor Type: Passive sensor
• Number of occupied pins: 6
• Cable Length [mm]: 1,190
• Nimetus: DE SS21339-12B1
• Tootja: DELPHI

• Ehitusaasta alates: 04.2006
• Fitting Position: Front Axle Right
• for brake disc diameter [mm]: 345
• Guarantee: 3 years guarantee
• paired article number: 57SKV206
• Weight [kg]: 0.5
• Always compare old and new part (in particular OE No.):
• Tootja: SKV GERMANY
• Nimetus: CE 57SKV207

• Ehitusaasta alates: 04.2006
• Fitting Position: Front Axle Left
• for brake disc diameter [mm]: 345
• Guarantee: 3 years guarantee
• paired article number: 57SKV207
• Weight [kg]: 0.37
• Always compare old and new part (in particular OE No.):
• Tootja: SKV GERMANY
• Nimetus: CE 57SKV206

• Installatsiooni pool: Tagasild
• Pidurisüsteem: TRW
• Tootja: BOSCH

• Installatsiooni pool: Tagasild, paremal
• for brake disc diameter [mm]: 302
• Nimetus: CFD 610227
• Tootja: DACO

• Fitting Position: Front Axle both sides
• Number of connectors: 2
• Tootja: JPN

• Fitting Position: Rear Axle Right
• for OE number: 4F0615612
• Material: Sheet Steel
• Surface: painted
• for brake disc diameter [mm]: 302
• Tootja: KAMOKA

• Fitting Position: Rear Axle Left
• for OE number: 4F0615611
• Material: Sheet Steel
• Surface: painted
• for brake disc diameter [mm]: 302
• Tootja: KAMOKA

• Installatsiooni pool: Tagasild, vasakul
• for brake disc diameter [mm]: 302
• Nimetus: CFD 610226
• Tootja: DACO

• Ehitusaasta alates: 05.2006
• Fitting Position: Rear Axle Right
• Cable Length [mm]: 1,380
• Number of pins: 2
• Tootja: MAGNETI MARELLI
• Nimetus: MM MWSS126

• Sensor Type: Passive sensor
• Number of pins: 2
• Cable Length [mm]: 957
• Fitting Position: Front Axle Right, Front Axle Left
• Tootja: AUTOFREN SEINSA

• for OE number: 4B0927803E
• Sensor Type: Passive sensor
• Fitting Position: Front Axle
• Tootja: KAMOKA

• Fitting Position: Front Axle
• Length [mm]: 975
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.15
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Tootja: SKV GERMANY
• Nimetus: CE 06SKV038

• Fitting Position: Rear Axle Left
• Manufacturer Restriction: Girling, TRW
• for brake disc diameter [mm]: 302
• Tootja: YSPARTS

• Fitting Position: Rear Axle Right
• Manufacturer Restriction: Girling, TRW
• for brake disc diameter [mm]: 302
• Tootja: YSPARTS

• Installatsiooni pool: paremal, Esisild
• Material: Sheet Steel
• for brake disc diameter [mm]: 345
• Fitting Position: Front Axle Right
• Nimetus: CFD 610213
• Tootja: DACO

• Installatsiooni pool: vasakul, Esisild
• Material: Sheet Steel
• for brake disc diameter [mm]: 345
• Fitting Position: Front Axle Left
• Nimetus: CFD 610212
• Tootja: DACO

• Fitting Position: Rear Axle
• Guarantee: 5 years guarantee
• Nimetus: HU 131407
• Tootja: HUECO / HITACHI

• Fitting Position: Front Axle Right
• Material: Sheet Steel
• Surface: Zinc-coated, painted, Cathodic Painting
• for brake disc diameter [mm]: 345
• paired article number: 56315
• Diameter 1/Diameter 2 [mm]: 140 / 365
• Tootja: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle Left
• Material: Sheet Steel
• Surface: Zinc-coated, Stoved Enamel
• paired article number: V10-5029
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: Tagasild paremal
• Sensor Type: Passive sensor
• Number of pins: 2
• Cable Length [mm]: 1,372
• Tootja: AUTOFREN SEINSA
• Nimetus: SE DS0030

• Installatsiooni pool: Tagasild mõlemapoolselt, Tagasild paremal
• PR-numbri jaoks: 8Q0, 8Q1, 8Q3, 8Q5
• Plokieraldus:
• Cable Length [mm]: 1,365
• Number of connectors: 2
• Tootja: JPN

• Installatsiooni pool: Esisild
• Kerenumber (VIN) alates: 8E-5-400001
• Sensor Type: Passive sensor
• Number of occupied pins: 4
• Cable Length [mm]: 1,000
• Tootja: DELPHI LOCKHEED HAMULCE
• Nimetus: DE SS20197
• Kvaliteediklass: PJ

• Installatsiooni pool: Esisild
• PR-numbri jaoks: 1LU
• Kogus pakendis: 2
• Brake Type: Disc Brake
• Length [mm]: 395
• Tootja: TRW

SVHC: No information available, please contact the manufacturer!

• Ehitusaasta alates: 05.2006
• Cable Length [mm]: 1,197
• Sensor Type: Passive sensor
• Fitting Position: Rear Axle Right
• Tootja: KAMOKA

• Ehitusaasta alates: 05.2006
• Sensor Type: Inductive Sensor
• Fitting Depth [mm]: 28
• Fitting Position: Front Axle Right, Front Axle Left
• Overall Length [mm]: 980
• Length [mm]: 380
• for OE number: 8E0927803B
• Tootja: MEAT&DORIA

• Installatsiooni pool: Tagasild vasakul
• Surface: Cathodic Painting
• Material: Sheet Steel
• for brake disc diameter [mm]: 302
• paired article number: 11080
• Weight [kg]: 0.56
• Tootja: ABS

• Ehitusaasta alates: 04.2006
• vajaminev tükihulk: 1
• Fitting Position: Rear Axle Left, Rear Axle Right
• Cable Length [mm]: 1,370
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 6PU012806891
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Installatsiooni pool: Esisild
• Overall Length [mm]: 1,050
• Length [mm]: 28
• Sensor Type: Passive sensor
• Socket colour: black
• Cable Length [mm]: 1,000
• paired article number: 30010
• Weight [kg]: 0.13
• Tootja: ABS

• Installatsiooni pool: Tagasild paremal
• Overall Length [mm]: 1,440
• Length [mm]: 28
• Sensor Type: Passive sensor
• Socket colour: black
• Weight [kg]: 0.2
• Cable Length [mm]: 1,370
• Tootja: ABS

• pidurikettaläbimõõdule (mm): 324
• pidurikettajämedusele (mm): 22
• Fitting Position: Rear Axle Right
• paired article number: 6115197
• Material: Sheet Steel
• Surface: Cathodic Painting
• Tootja: METZGER

• Fitting Position: Rear Axle Right
• paired article number: 57066
• Surface: Cathodic Painting
• Diameter 1/Diameter 2 [mm]: 80 / 325
• Tootja: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle Left
• paired article number: 57067
• Surface: Cathodic Painting
• Diameter 1/Diameter 2 [mm]: 80 / 325
• Tootja: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• pidurikettaläbimõõdule (mm): 324
• PR-numbri jaoks: 1KY
• paired article number: 174632
• Fitting Position: Rear Axle Right
• Weight [kg]: 0.539
• Observe service information:
• Tootja: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• PR-numbri jaoks: 8Q0, 8Q1, 8Q3, 8Q5
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Plokieraldus:
• Braking/Driving Dynamics: for vehicles with ABS
• Rated Voltage [V]: 12
• Resistor [Ohm]: 1,650
• Cable Length [mm]: 1,360
• Sensor Type: Hall Sensor, Passive sensor
• Number of pins: 2
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.