Tootekategooriad
Filtrid Pidurid vedrustus/alusvanker Roolisüsteem Jahutus/kliima Elektrisüsteem Veokonks/lisad Jõuülekanne Väljalaskesüsteem Kere Süüte-/eelsüütesüsteem Mootor Klaasid/klaasipuhastus Valgustus Kütus Kabiinivarustus HooldusToode
Kirjeldus
Laoseis
Hind
(km-ga)


- Fitting Position: transmission sided
- Inner Diameter 1 [mm]: 23
- Inner Diameter 2 [mm]: 56
- Height [mm]: 99
- Tootja: AUTOFREN SEINSA
- Nimetus: SE D8049
- Lisainfo: D8049


-
Installatsiooni pool: kastipoolselt,
esisild vasakul, esisild paremal - Length [mm]: 110
-
Material: Polychloroprene
(Neoprene) - Inner Diameter 1 [mm]: 69
- Inner Diameter 2 [mm]: 24.5
- Tootja: GSP


- Fitting Position: Wheel Side
- Inner Diameter 1 [mm]: 21
- Inner Diameter 2 [mm]: 83
- Height [mm]: 75
- Tootja: AUTOFREN SEINSA
- Nimetus: SE D8373


- Fitting Position: transmission sided
- Height [mm]: 85
- Weight [kg]: 0.13
- Material: Rubber
- Joint Type: Tripod Joint
- Inner Diameter 1 [mm]: 21.5
- Inner Diameter 2 [mm]: 70
- Tootja: METALCAUCHO


- Käigukasti liik: Käigukast
-
Fitting Position: transmission sided,
Front Axle - Length [mm]: 87
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 72
- Tootja: JPN


- Installatsiooni pool: kastipoolselt
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 70
- Height [mm]: 85
- for OE number: 8N0498201B
- Tootja: AUTOFREN SEINSA
- Nimetus: SE D8392
- Lisainfo: D8392


- Fitting Position: transmission sided
- Height [mm]: 85
- Weight [kg]: 0.26
- Material: Rubber
- Inner Diameter 1 [mm]: 21.5
- Inner Diameter 2 [mm]: 70
- Tootja: METALCAUCHO


-
Installatsiooni pool: Tagasild,
rattapool - Inner Diameter 1 [mm]: 21
- Inner Diameter 2 [mm]: 85
- Length [mm]: 75
- Material: Rubber
- SVHC: No SVHC present!
- Tootja: FAG


-
Tootmise kuupäev alates: 01/
06 - Fitting Position: transmission sided
- for OE number: 1K0498201D
- Tootja: SASIC


-
Installatsiooni pool: kastipoolselt,
Tagasild - Length [mm]: 99
- Material: Rubber
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 57
- Observe service information:
- Tootja: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.



-
Installatsiooni pool: rattapool,
esisild vasakul, esisild paremal - Length [mm]: 122
-
Material: Polychloroprene
(Neoprene) - Inner Diameter 1 [mm]: 96
- Inner Diameter 2 [mm]: 27
- Tootja: GSP


- Length [mm]: 130
- Inner Diameter [mm]: 62
-
Outer Diameter [mm]: 94,
86, 78, 66, 38, 32, 28, 24 - Material: Rubber
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.27
- Inner Diameter 3 [mm]: 74
- Supplementary Article/Info 2: with clamps
- Tootja: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

-
Installatsiooni pool: kastipoolselt,
Tagasild - Length [mm]: 99
- Material: Rubber
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 57
- Observe service information:
- Nimetus: SW 30 93 8345
- Tootja: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


-
Kerenumber (VIN): [8E-
4- 000001;], [8E- 4- 195 501;] - Parameter: Trilobal boots
- Height [mm]: 85
- Inner Diameter 2 [mm]: 70
- Nimetus: SN IBK54.010
- Tootja: SNR
Fitting Position: transmission sided, Front Axle Left, Front Axle Right


-
Tootmise kuupäev alates: 01/
06 - Fitting Position: Wheel Side
- Material: Thermoplast
- for OE number: 8E0498203C
- Tootja: SASIC



- Installatsiooni pool: Tagasild
- Inner Diameter 1 [mm]: 24
- Slim Set:
- Length [mm]: 103
- Height [mm]: 100
- Inner Diameter 2 [mm]: 57
-
Fitting Position: transmission sided,
Front Axle - Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.


- Käigukasti liik: Käigukast
- Joint Type: Tripod Joint
- Length [mm]: 87
- Material: Rubber
- Inner Diameter 1 [mm]: 24
- Weight [kg]: 0.236
- Inner Diameter 2 [mm]: 72
- Observe service information:
- Tootja: FEBI BILSTEIN
- Lisainfo: 38343 FEBI
Fitting Position: Front Axle Left, transmission sided, Front Axle Right General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


-
Fitting Position: Wheel Side,
Front Axle both sides - Height [mm]: 123
- Weight [kg]: 0.219
- Material: Thermoplast
- Inner Diameter 1 [mm]: 28
- Inner Diameter 2 [mm]: 97
- Tootja: METALCAUCHO


- Installatsiooni pool: rattapool
- Inner Diameter 1 [mm]: 28
- Inner Diameter 2 [mm]: 98
- Height [mm]: 120
- Tootja: AUTOFREN SEINSA
- Nimetus: SE D8378T
- Lisainfo: D8378T AUT





- Ehitusaasta alates: 04.2006
-
Installatsiooni pool: rattapool,
esisild vasakul, esisild paremal - Inner Diameter 1 from [mm]: 24
- Inner Diameter 1 to [mm]: 28
- Inner Diameter 2 from [mm]: 94
- Inner Diameter 2 to [mm]: 108
- Height [mm]: 127
- New Part:
- Supplementary Article/Supplementary Info: with grease
- Tootja: LOBRO
General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.

- Käigukasti liik: Käigukast
- Joint Type: Tripod Joint
- Length [mm]: 87
- Material: Rubber
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 72
- Weight [kg]: 0.236
- Observe service information:
- Nimetus: SW 30 93 8343
- Tootja: SWAG
Fitting Position: Front Axle Left, transmission sided, Front Axle Right General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.





















































- PR-numbri jaoks: TK7
- Mudeliaasta alates: 2006
- Fitting Position: transmission sided
- Length [mm]: 86
-
Material: NBR
(nitrile butadiene rubber) - Joint Type: Tripod Joint
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 81
- Tootja: FEBEST
-
Lisainfo: 1715-
A6T FEBEST



- Ehitusaasta alates: 04.2006
-
Installatsiooni pool: kastipoolselt,
esisild vasakul, esisild paremal - Inner Diameter 1 [mm]: 21
- Inner Diameter 2 [mm]: 81
- Height [mm]: 84
- Joint Type: Tripod Joint
-
Bellows Material: NBR
(nitrile butadiene rubber) - New Part:
- Supplementary Article/Supplementary Info: with grease
- Tootja: GKN LOBRO
General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.


-
Kerenumber (VIN): [;8E-
1A014312] - Parameter: Circular boots
- Height [mm]: 100
- Inner Diameter 2 [mm]: 57
-
Fitting Position: transmission sided,
Front Axle Left - Nimetus: SN IBK54.012
- Tootja: SNR


-
Fitting Position: transmission sided,
Front Axle both sides - Height [mm]: 89
- Weight [kg]: 0.27
- Material: Rubber
- Joint Type: Tripod Joint
- Inner Diameter 1 [mm]: 21.5
- Inner Diameter 2 [mm]: 70.5
- Tootja: METALCAUCHO


- Ehitusaasta alates: 04.2006
-
Installatsiooni pool: rattapool,
esisild vasakul, esisild paremal - Inner Diameter 1 [mm]: 28
- Inner Diameter 2 [mm]: 98
- Height [mm]: 123
- only in connection with: 4A0407643A
- Thread Size: M16x1.5x77
-
Bellows Material: TPE
(thermoplastic elastomer) - New Part:
- Supplementary Article/Info 2: with screw
- Supplementary Article/Supplementary Info: with grease
- Tootja: GKN LOBRO
General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.


- Ehitusaasta alates: 04.2006
-
Installatsiooni pool: rattapool,
Tagasild vasakul, Tagasild paremal - Inner Diameter 1 [mm]: 21
- Inner Diameter 2 [mm]: 85
- Height [mm]: 75
- Thread Size: M16x1.5x72
-
Bellows Material: NBR
(nitrile butadiene rubber) - New Part:
- Supplementary Article/Info 2: with screw
- Supplementary Article/Supplementary Info: with grease
- Tootja: LOBRO
General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.



- Installatsiooni pool: Tagasild
- Length [mm]: 115
- Height [mm]: 83
- Inner Diameter 1 [mm]: 34
- Inner Diameter 2 [mm]: 80
- Full Set:
-
Fitting Position: transmission sided,
Front Axle - Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.



- PR-numbri jaoks: TK7
- Mudeliaasta alates: 2006
- Fitting Position: Wheel Side
- Length [mm]: 120
- Material: PVC
- Joint Type: CV Joint
- Inner Diameter 1 [mm]: 28
- Inner Diameter 2 [mm]: 98
- Tootja: FEBEST



-
Outer Diameter [mm]: 27,
75, 92, 100, 108, 116 - Material: Rubber
-
Fitting Position: Front Axle,
Rear Axle - Height [mm]: 151
- Weight [kg]: 0.23
- Supplementary Article/Info 2: with clamps
- Observe service information:
- Tootja: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Ehitusaasta alates: 04.2006
-
Installatsiooni pool: kastipoolselt,
Tagasild vasakul, Tagasild paremal - Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 59
- Height [mm]: 100
- Supplementary Article/Info 2: with top
- Joint Type: Flexible Joint Disc
- Bore Diameter [mm]: 10.6
- Number of bores: 6
- Bolt Hole Circle Ø [mm]: 94
-
Bellows Material: NBR
(nitrile butadiene rubber) - New Part:
- Supplementary Article/Supplementary Info: with grease
- Tootja: LOBRO
General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.