Tootekategooriad
Filtrid Pidurid vedrustus/alusvanker Roolisüsteem Jahutus/kliima Elektrisüsteem Veokonks/lisad Jõuülekanne Väljalaskesüsteem Kere Süüte-/eelsüütesüsteem Mootor Klaasid/klaasipuhastus Valgustus Kütus Kabiinivarustus HooldusToode
Kirjeldus
Laoseis
Hind
(km-ga)
- Material: Plastic
-
Tootja: JP GROUP A/
S - Lisainfo: PAKENDIS 10 tk
- Thickness [mm]: 3.5
- Inner Diameter [mm]: 19.5
-
Material: NBR
(nitrile butadiene rubber) - Tootja: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Fitting Position: Left
- Tootja: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Kogus pakendis: 100
- Tootja: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Material: NBR
(nitrile butadiene rubber) - Weight [kg]: 0.003
- Thickness [mm]: 3.5
- Inner Diameter [mm]: 19.5
- Required quantity: 1
- General Information: O ring
- Tootja: VIKA
- Material: Plastic
- for OE number: 032121142
- Tootja: DELLO AUTOMEGA
- Thickness [mm]: 3.5
- Inner Diameter [mm]: 19.5
-
Material: NBR
(nitrile butadiene rubber) - Weight [kg]: 0.003
- Tootja: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Plastic
- Weight [kg]: 0.015
- Tootja: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: engine sided
- Sealing Ring Diameter [mm]: 50
- Thickness [mm]: 3.15
- Shape: O Shape
- Tootja: JP GROUP
- Lisainfo: PAKENDIS 10 tk
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Width [mm]: 32
- Thickness [mm]: 1.98
- Material: Steel
- Weight [kg]: 0.001
- Tootja: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Kogus pakendis: 10
- Fitting Position: engine sided
- Sealing Ring Diameter [mm]: 50
- Thickness [mm]: 3.15
- Shape: O Shape
- Surface: nubby
- Tootja: TOPRAN
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Installatsiooni pool: Silindripea
- Kogus pakendis: 25
- Inner Diameter [mm]: 50
- Outer Diameter [mm]: 56.3
- Thickness [mm]: 3.15
-
Shape: O-
Ring - Tootja: ELRING
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- for manufacturer number: 7920065
- Tootja: KAMOKA
- Material: Plastic
- Diameter 1 [mm]: 32
- Tootja: 3RG
- Material: Plastic
- Fitting Position: Front
-
Supplementary Article/Supplementary Info: with gasket/
seal - Tootja: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Material: Plastic
-
Fitting Position: transmission sided,
Cylinder Head - Heating/Cooling: with thermal switch connector
- Supplementary Article/Info 2: with seal ring
- Tootja: TOPRAN HANS PRIES
- Lisainfo: 110 361 HP
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- for OE number: 038121121B
- Material: Plastic
-
Supplementary Article/Supplementary Info: without gasket/
seal - Weight [g]: 100
- Length 1 [mm]: 160
- Supplementary Article/Info 2: without thermostat
- Inner Diameter 1 [mm]: 40
- Inner Diameter 2 [mm]: 25
- Nimetus: IM 90354
- Tootja: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- Material: Plastic
-
Fitting Position: Front,
Longitudinal - General Information: Thermostat cover
- Tootja: VIKA
- Mootorikood: BKE
- Fitting Position: Rear
- Tootja: METALCAUCHO
- for manufacturer number: 7920096
- Tootja: KAMOKA
- Fitting Position: Cylinder Head
- Heating/Cooling: with thermal switch connector
- Tootja: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Weight [kg]: 0.153
-
Supplementary Article/Supplementary Info: with gasket/
seal - Required quantity: 1
- General Information: Coolant flange
- Tootja: VIKA
- Diameter 1 [mm]: 32
- Diameter 2 [mm]: 16
- Diameter 3 [mm]: 20
- for OE number: 038121132D
- Tootja: MEAT&DORIA
-
Supplementary Article/Supplementary Info: with gasket/
seal - Supplementary Article/Info 2: without engine temperature sensor
-
Fitting Position: Cylinder Head,
Flywheel side - Tootja: VERNET
Cooling Hose: from EGR cooler to flange, from engine to engine cooler
- Supplementary Article/Info 2: without thermostat
- Weight [g]: 156
- Fitting Position: Cylinder Head
-
Supplementary Article/Supplementary Info: with gasket/
seal - Material: Plastic
- for OE number: 038121132D
- Colour: grey
- Number of mounting bores: 2
- Packaging length [cm]: 15.9
- Packaging width [cm]: 15
- Packaging height [cm]: 11
- Tootja: MOTORAD
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Weight [kg]: 0.153
-
Supplementary Article/Supplementary Info: with gasket/
seal - for OE number: 038 121 132 D
- Tootja: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Supplementary Article/Supplementary Info: with gasket/
seal - Fitting Position: Cylinder Head
- Tootja: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Supplementary Article/Supplementary Info: with gasket/
seal - for OE number: 038 121 132 D
- Nimetus: SW 30 94 6298
- Tootja: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 3M218B011AA
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [g]: 152
- Supplementary Article/Info 2: without thermostat
- Nimetus: IM 90573
- Tootja: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
-
Fitting Position: Cylinder Head,
transmission sided - Material: Plastic
- Heating/Cooling: with thermal switch connector
- Supplementary Article/Info 2: with seal ring
-
Fabrication Number: CTM-
VW- 030 - Tootja: NTY
-
Nimetus: NTY CTM-
VW- 030
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Length [mm]: 185
- Height [mm]: 65
-
Supplementary Article/Supplementary Info: with gasket/
seal - Width [mm]: 90
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Weight [kg]: 0.15
- Supplementary Article/Info 2: without thermostat
- Tootja: METALCAUCHO
-
Fitting Position: Cylinder Head,
transmission sided - Cooling Hose: from engine to engine cooler
- for OE number: 038121132D
Laki Auto universaaltooted
TecDoc sõidukite kataloog
TecDoc veokite kataloog