Tootekategooriad
Filtrid Pidurid vedrustus/alusvanker Roolisüsteem Jahutus/kliima Elektrisüsteem Veokonks/lisad Jõuülekanne Väljalaskesüsteem Kere Süüte-/eelsüütesüsteem Mootor Klaasid/klaasipuhastus Valgustus Kütus Kabiinivarustus HooldusToode
Kirjeldus
Laoseis
Hind
(km-ga)
-
Fitting Position: Upper,
Rear, Front Axle Left, Front Axle Right - Control/Trailing Arm Type: for control arm
- Nimetus: Control arm bush left=right
- Kvaliteediklass: PJ
Lisainfo: "Tootja: SRL
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"
Lisainfo: AUDI A4 AVANT / QUATTRO
- Quantity per axle: 2
- Control/Trailing Arm Type: for control arm
-
Fitting Position: Front Axle,
Lower, Front, inner, both sides - Article number of recommended accessories: 39430 01
- Observe service information:
-
Nimetus: Puks -
Kndmik VW P. A4/ PASSAT 97- - Tootja: LMI
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front Axle Left,
Front Axle Right, inner -
Mounting Type: Rubber-
Metal Mount -
Lisainfo: Rubber mount for wishbone,
front, rear
- Weight [kg]: 0.07
- Length 2 [mm]: 31
- Length 1 [mm]: 37
-
Fitting Position: Lower,
Front Axle, Front, both sides - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 40.2
- Required quantity: 2
- Tootja: TEDGUM
-
Fitting Position: Lower,
Front, Front Axle Left, Front Axle Right -
Material: Rubber/
Metal - Thickness [mm]: 37
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 40,
24 -
Mounting Type: Rubber-
Metal Mount - Nimetus: Control arm bush left=right
- Kvaliteediklass: PJ
Lisainfo: "Tootja: SRL
AUDI A4 SDN 01-
(kvaliteediklass: PJ)"
Lisainfo: Rubber mount for wishbone, front
-
Fitting Position: Front Axle Left,
Front Axle Right, Lower, inner - Tootja: JP GROUP
-
Lisainfo: Rubber mount for wishbone,
front, inner
- Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 2
- Outer Diameter [mm]: 50
- Inner Diameter [mm]: 12
- Width [mm]: 31
- Tootja: TOPRAN HANS PRIES
Fitting Position: Front Axle Left, Front Axle Right, Lower, Front, inner General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount -
Fitting Position: Centre,
Lower Front Axle - Axle alignment required after fitting:
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Lower Front Axle,
outer -
Mounting Type: Rubber-
Metal Mount -
Lisainfo: Rubber mount for wishbone,
front
- PR-numbri jaoks: 1BV
-
Fitting Position: Front Axle Left,
Front Axle Right, Upper -
Mounting Type: Rubber-
Metal Mount -
Lisainfo: Rubber mount for wishbone,
front
-
Installatsiooni pool: Esisild,
üleval -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 46
- Width [mm]: 40
- SVHC: No SVHC present!
- Nimetus: Puks
- Tootja: FAG
-
Installatsiooni pool: paremal,
vasakul - Fitting Position: Front Axle
- Required quantity: 4
- Nimetus: COC 80004742
- Tootja: CORTECO
- Kerenumber (VIN) alates: 8E1000001
- Kerenumber (VIN) kuni: 8E5400000
- Fitting Position: Front Axle
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Height [mm]: 40
- Outer Diameter [mm]: 46
- Inner Diameter [mm]: 10
-
Material: Rubber/
Metal - Weight [kg]: 0.07
-
Nimetus: DY 37-
06034- 5 - Tootja: DYS
-
Installatsiooni pool: Esisild,
väljas, all - Inner Diameter 1 [mm]: 12
- Outer Diameter 1 [mm]: 40
- Thickness 1 [mm]: 37
- Tootja: DELPHI
- Nimetus: DE TD475W
- Kogus pakendis: 2
- Diameter [mm]: 46
-
Mounting Type: Rubber-
Metal Mount - Height [mm]: 40
- Axle alignment required after fitting:
-
Fitting Position: both sides,
inner, Upper Front Axle - Control/Trailing Arm Type: for control arm
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Installatsiooni pool: üleval,
Esisild - Tootja: GSP
-
Fitting Position: Front Axle Left,
Front Axle Right, Upper, inner - Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 4
- Outer Diameter [mm]: 46
- Inner Diameter [mm]: 10
- Width [mm]: 26
- Axle alignment required after fitting:
- Tootja: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Thickness [mm]: 37
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 40,
24 -
Material: Rubber/
Metal -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.074
-
Nimetus: Puks -
Kndmik VW P. A4/ A6/ A8 - Tootja: FEB
Fitting Position: Lower, Front Axle Left, Front, outer, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle,
Lower, both sides, Front, outer -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Outer Diameter [mm]: 37
- Inner Diameter [mm]: 30
- Height [mm]: 40.4
-
Nimetus: Puks -
Kndmik VW P. A4/ A6/ A8 - Tootja: MAX
-
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal, üleval - Tootja: GSP ZAWIESZENIE
-
Installatsiooni pool: Esisild,
taga, üleval - Inner Diameter 1 [mm]: 10
- Outer Diameter 1 [mm]: 47
- Thickness 1 [mm]: 40
- Tootja: DELPHI
- Nimetus: DE TD437W
-
Fitting Position: Rear Axle Lower,
inner, Lower - Tootja: GSP
- Width [mm]: 37
- Thickness [mm]: 37
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 40,
24 -
Material: Rubber/
Metal -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.065
- Nimetus: SW 32 60 0003
- Tootja: SWAG
Fitting Position: Lower, Front Axle Left, Front, outer, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle Lower
-
Mounting Type: Rubber-
Metal Mount - Outer Diameter [mm]: 36
- Tootja: KAMOKA
- Thickness [mm]: 40
- Inner Diameter [mm]: 10
-
Outer Diameter [mm]: 46,
47 -
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Upper, Front Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.09
-
Nimetus: Puks -
Kndmik VW P. A4/ A6/ A8 LE/ PR PRZEDNIA - Tootja: FEB
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle,
Upper, inner, outer - Thickness [mm]: 46
-
Outer Diameter [mm]: 36,
26 - Inner Diameter [mm]: 12
-
Nimetus: Puks -
Kndmik VW T. A4 00- LE/ PR - Tootja: MAX
-
Fitting Position: Front Axle,
Front, Lower - Inner Diameter [mm]: 12.5
- Outer Diameter [mm]: 40.5
- for OE number: 8E0407181C
- paired article number: 9001539
- Tootja: SASIC
-
Fitting Position: Front Axle,
Lower, both sides, Front, outer -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Outer Diameter [mm]: 37
- Inner Diameter [mm]: 30
- Height [mm]: 40.4
- Quantity per axle: 2
- Article number of recommended accessories: 39430 01
- Observe service information:
-
Nimetus: Puks -
Kndmik VW P. A4/ A6/ A8/ PASSAT 01- DOLNE - Tootja: LMI
SVHC: No information available, please contact the manufacturer!
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
-
Fitting Position: Front Axle,
Upper, both sides, Front, Rear, inner - Length [mm]: 40
- Inner Diameter [mm]: 10.1
- Outer Diameter [mm]: 46.4
- Quantity per axle: 4
- Tootja: TRW
SVHC: No information available, please contact the manufacturer!
- Thickness [mm]: 40
- Inner Diameter [mm]: 10
-
Outer Diameter [mm]: 46,
47 -
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Upper, Front Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.09
- Nimetus: SW 32 93 0696
- Tootja: SWAG
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle both sides,
Upper - Inner Diameter [mm]: 10.2
- Outer Diameter [mm]: 46
- Height [mm]: 40
- Nimetus: ALT 80928AL
- Tootja: ALTE AUTOMOTIVE
-
Installatsiooni pool: Esisild,
sees, üleval, silla ees - Height 1 [mm]: 40
- Height 2 [mm]: 26
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 47
- Tootja: KAVO
-
Fitting Position: Upper Front Axle,
inner -
Material: Rubber/
Metal - Outer Diameter [mm]: 46
- Tootja: KAMOKA
- Outer Diameter 1 [mm]: 46
- Outer Diameter 2 [mm]: 47
- Inner Diameter 1 [mm]: 10
- Thickness [mm]: 40
-
Mounting Type: Rubber-
Metal Mount - Tootja: BGA
Fitting Position: Front Axle Left, Upper Front Axle, Front Axle Right
- Kogus pakendis: 2
- Fitting Position: Front Axle
- Weight [kg]: 0.08
- Height 1 [mm]: 26
- Height 2 [mm]: 39.8
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 46.4
- Control/Trailing Arm Type: Control Arm
- Weight [g]: 80
- Tootja: METALCAUCHO
- Fitting Position: Rear Axle
- Total Length [mm]: 60
- Outer Diameter [mm]: 43.8
- Inner Diameter [mm]: 12.2
- Nimetus: COC 80005087
- Tootja: CORTECO
- Height [mm]: 37
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 40
- Supplementary Article/Supplementary Info: without holder
- Required quantity: 2
- replacement in pairs recommended:
-
Nimetus: Puks -
Kndmik VW P. A4/ A6/ A8 - Tootja: MEY
Fitting Position: outer, Front, Lower, Front Axle Left, Front Axle Right
-
Installatsiooni pool: Esisild,
all -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 50
- Width 1 [mm]: 32
- Width 2 [mm]: 60
- SVHC: No SVHC present!
- Tootja: FAG
- Nimetus: LU 829009710
-
Kerenumber (VIN) alates: 8E-
1- 000 0 -
Kerenumber (VIN) kuni: 8E-
5- 400 0 - Šassii: ilma sportvedrustuseta sõidukitele
-
Fitting Position: Front Axle both sides,
Upper, inner -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Outer Diameter [mm]: 46.4
- Inner Diameter [mm]: 10
- Weight [kg]: 0.086
- Length [mm]: 40
- Tootja: RTS SA
-
Fitting Position: Front Axle,
Front, inner, Right, Left - Outer Diameter [mm]: 50.2
- Inner Diameter [mm]: 12.2
- Weight [kg]: 0.2
- Nimetus: COC 21652815
- Tootja: CORTECO
- Height [mm]: 60
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 44
- Supplementary Article/Supplementary Info: without holder
- Required quantity: 2
- replacement in pairs recommended:
-
Nimetus: Puks -
Kndmik VW T. A4 00- LE/ PR - Tootja: MEY
Fitting Position: outer, Front, Rear Axle Right, Rear Axle Left, Lower
- Length [mm]: 60
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 50
-
Material: Rubber/
Metal - Weight [kg]: 0.202
- Observe service information:
-
Nimetus: Puks -
Kndmik VW P. A4/ PASSA - Tootja: FEB
Fitting Position: Front Axle Left, Lower, Front, inner, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Installatsiooni pool: Tagasild,
väljas - Inner Diameter 1 [mm]: 60
- Outer Diameter 1 [mm]: 12
- Thickness 1 [mm]: 46
- Tootja: DELPHI
- Nimetus: DE TD1246W
- Fitting Position: Rear Axle both sides
- Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 44
- Height [mm]: 60
- Nimetus: ALT 98282AL
- Tootja: ALTE AUTOMOTIVE
-
Installatsiooni pool: Esisild,
sees, all - Inner Diameter 1 [mm]: 12
- Outer Diameter 1 [mm]: 50
- Thickness 1 [mm]: 60
- Tootja: DELPHI
- Nimetus: DE TD440W
- Length [mm]: 60
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 50
-
Material: Rubber/
Metal - Weight [kg]: 0.202
- Observe service information:
- Nimetus: SW 30 60 0031
- Tootja: SWAG
Fitting Position: Front Axle Left, Lower, Front, inner, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: Rear Axle
- Axle alignment required after fitting:
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control/Trailing Arm Type: for control arm
-
Fitting Position: Rear Axle,
Upper -
Mounting Type: Rubber-
Metal Mount - Axle alignment required after fitting:
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Installatsiooni pool: väljas,
Tagasild mõlemapoolselt, all - vajaminev tükihulk: 2
- Nimetus: SK VKDS431017
- Tootja: SKF
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Nimetus: Control arm bush left=right
- Kvaliteediklass: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI A4 SDN 01-
(kvaliteediklass: PJ)"
-
Installatsiooni pool: all,
väljas, ees, esisild mõlemapoolselt - vajaminev tükihulk: 2
- paired article number: VKDS 331006
- Height [mm]: 40.2
- Inner Diameter [mm]: 12.4
- Outer Diameter [mm]: 40.2
- Nimetus: SK VKDS331006
- Tootja: SKF
- Installatsiooni pool: Esisild
- Hulk: 2
-
Fitting Position: inner,
Front, Front Axle both sides, Lower - Weight [kg]: 0.202
- Length [mm]: 60
-
Material: Rubber/
Metal - Required quantity: 2
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 50
- General Information: Bush for control arm
- Tootja: VIKA
- Thickness [mm]: 60
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 46
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.12
-
Nimetus: Puks -
Kndmik VW T. A4 00- LE/ PR - Tootja: FEB
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Installatsiooni pool: Esisild,
sees, silla ees, üleval, silla taga - Plokieraldus:
- Inner Diameter 1 [mm]: 10
- Outer Diameter 1 [mm]: 47
- Thickness 1 [mm]: 40
- Tootja: DELPHI
- Nimetus: DE TD871W
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Nimetus: Control arm bush left=right
- Kvaliteediklass: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
-
Installatsiooni pool: Esisild,
üleval -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 46
- Width [mm]: 40
- SVHC: No SVHC present!
- Tootja: SCHAEFFLER POLSKA
-
Fitting Position: outer,
Lower, Front Axle Left, Front Axle Right - Outer Diameter 1 [mm]: 44
- Inner Diameter 1 [mm]: 12
- Thickness 1 [mm]: 38
- Tootja: BGA
- Thickness [mm]: 60
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 46
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.12
- Nimetus: SW 30 93 0687
- Tootja: SWAG
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Height [mm]: 60
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 50
- Supplementary Article/Supplementary Info: without holder
- reinforced version:
- Required quantity: 2
- Replace in pairs only:
-
Nimetus: Puks -
Kndmik VW P. A4/ PASSA - Tootja: MEY
Fitting Position: Front Axle Right, Front Axle Left, Lower, Front, inner General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.
- Kerenumber (VIN) alates: 8E5400001
-
Fitting Position: Front Axle Left,
Front Axle Right - Tootja: JP GROUP
-
Lisainfo: Rubber mount for wishbone,
front
-
Installatsiooni pool: Esisild,
sees, ees, taga - Ehitusaasta kuni: 03.2008
- Telg: 1.Es
- Control/Trailing Arm Type: Control Arm
- Required quantity: 4
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.115
- Packaging length [cm]: 11
- Packaging width [cm]: 6
- Packaging height [cm]: 6
- Tootja: MONROE
- Thickness [mm]: 46
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 36,
26 -
Material: Rubber/
Metal - Weight [kg]: 0.073
-
Nimetus: Puks -
Kndmik VW T. A4 00- LE/ PR - Tootja: FEB
Fitting Position: Rear Axle Left, Upper, inner, outer, Rear Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Upper,
Rear Axle Right, Rear Axle Left - Height [mm]: 46
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 36
- Supplementary Article/Supplementary Info: without holder
- Required quantity: 2
- replacement in pairs recommended:
-
Nimetus: Puks -
Kndmik VW T. A4 00- LE/ PR - Tootja: MEY
- Fitting Position: Lower
- General Information: Bush for wishbone arm
- Tootja: VIKA
-
Fitting Position: Rear Axle,
inner, Left, Right, Upper, outer -
Fabrication Number: ZTT-
CH- 006D - Tootja: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Installatsiooni pool: Tagasild,
sees - Inner Diameter 1 [mm]: 12
- Outer Diameter 1 [mm]: 36
- Thickness 1 [mm]: 46
- Tootja: DELPHI
- Nimetus: DE TD1301W
- Ehitusaasta kuni: 03.2008
-
OE-numbri jaoks: 8E0505311AF,
8E0505312AF -
Fitting Position: Front,
Rear Axle Lower, outer - Tootja: FEBEST
-
Fitting Position: Front Axle Right,
Front Axle Left, Centre - Nimetus: COC 49400197
- Tootja: CORTECO
-
Installatsiooni pool: Esisild,
all, ees, väljas -
Mounting Type: Rubber-
Metal Mount, Pressed - Inner Diameter [mm]: 12.4
- Outer Diameter [mm]: 40.3
- Width 1 [mm]: 37
- Width 2 [mm]: 31
- SVHC: No SVHC present!
- Nimetus: LU 829063910
- Tootja: FAG
-
Installatsiooni pool: ees,
esisild mõlemapoolselt, all, sees - vajaminev tükihulk: 2
- paired article number: VKDS 331013
- Height [mm]: 60
- Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 24
- Nimetus: SK VKDS331013
- Tootja: SKF
- Inner Diameter [mm]: 12.5
- Outer Diameter [mm]: 40.2
- Length [mm]: 37
- paired article number: 270702
- Weight [kg]: 0.07
-
Installation Information: Important:
Observe Fitting Instructions - Tootja: ABS
Installatsiooni pool: silla ees, esisild vasakul, esisild paremal, väljas, all
-
Installatsiooni pool: Esisild,
sees, all, taga - Inner Diameter 1 [mm]: 12
- Outer Diameter 1 [mm]: 65
- Thickness 1 [mm]: 80
- Nimetus: DE TD1366W
- Tootja: DELPHI
-
Fitting Position: Lower,
inner, Front -
Material: Rubber/
Metal - Outer Diameter [mm]: 50
- Tootja: KAMOKA
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
-
Fitting Position: Front Axle both sides,
Lower, inner, Front - Outer Diameter [mm]: 50.3
- Inner Diameter [mm]: 12.2
- Length [mm]: 60
- Weight [kg]: 0.202
- Tootja: RTS SA
- Thickness [mm]: 46
- Inner Diameter [mm]: 12.3
-
Outer Diameter [mm]: 36.5,
26 -
Material: Rubber/
Metal - Weight [kg]: 0.07
- Nimetus: SW 30 93 0494
- Tootja: SWAG
Fitting Position: Rear Axle Left, Upper, inner, outer, Rear Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Nimetus: Control arm bush left=right
- Kvaliteediklass: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65.2
- Material: Aluminium
-
Fitting Position: Front Axle Left,
Lower, Rear, Front Axle Right - Weight [kg]: 0.45
- Observe service information:
-
Nimetus: Puks -
Kndmik VW P. A4 04- - Tootja: FEB
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle,
Upper, both sides, Front, Rear - Control/Trailing Arm Type: for control arm
- Quantity per axle: 4
-
Nimetus: Puks -
Kndmik VW P. A4/ A6/ A8 LE/ PR PRZEDNIA - Tootja: LMI
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front,
Rear, Upper Front Axle, outer - Tootja: FEBEST
- PR-numbri jaoks: 1BV
-
Fitting Position: Upper,
Front Axle Left, Front Axle Right - Height [mm]: 40
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 47
- Supplementary Article/Supplementary Info: without holder
- reinforced version:
- Required quantity: 2
- Replace in pairs only:
-
Nimetus: Puks -
Kndmik VW P. A4/ A6/ A8 LE/ PR PRZEDNIA - Tootja: MEY
General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.
- Length [mm]: 37.8
- Width [mm]: 40
- Thickness [mm]: 38
- Inner Diameter [mm]: 12.3
- Outer Diameter [mm]: 40
-
Material: Rubber/
Metal - Weight [kg]: 0.13
- Nimetus: Puks
- Tootja: FEB
Fitting Position: Rear Axle Left, Lower, Rear, inner, Rear Axle Right General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Installatsiooni pool: paremal,
vasakul - Fitting Position: Front Axle
- Required quantity: 2
- Total Length [mm]: 80
- Outer Diameter [mm]: 65
- Inner Diameter [mm]: 12.1
- Nimetus: COC 80004744
- Tootja: CORTECO
-
Fitting Position: Front Axle,
Lower, Front, inner - Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 24
- Height [mm]: 60
- Nimetus: ALT 80990AL
- Tootja: ALTE AUTOMOTIVE
-
Installatsiooni pool: esisild vasakul,
esisild paremal, all, väljas - for OE number: 4D0 407 182 E
- Tootja: GSP
-
Installatsiooni pool: Tagasild,
kahepoolne, all, väljas -
Mounting Type: Rubber-
Metal Mount - Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 41.3
- Width [mm]: 45
- SVHC: No SVHC present!
- Tootja: FAG
-
OE-numbri jaoks: 8E0407693AL,
8E0407694AL -
Mounting Type: Rubber-
Metal Mount -
Fitting Position: Front Axle,
Lower, both sides, Rear, inner - Length [mm]: 56
- Overall Length [mm]: 79.3
- Inner Diameter 1 [mm]: 12
- Inner Diameter 2 [mm]: 27
- Outer Diameter [mm]: 63.4
- Tootja: TRW
SVHC: No information available, please contact the manufacturer!
-
kombineeritud PR-numbrile: 1BA,
1BE, 1BR, 1BV -
Fitting Position: Rear Axle Upper,
Rear, outer - Tootja: FEBEST
- Length [mm]: 37.8
- Width [mm]: 40.4
- Thickness [mm]: 37.8
- Inner Diameter [mm]: 12.3
- Outer Diameter [mm]: 40
-
Material: Rubber/
Metal - Weight [kg]: 0.13
- Nimetus: SW 30 10 4781
- Tootja: SWAG
Fitting Position: Rear Axle Left, Lower, Rear, inner, Rear Axle Right General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
kombineeritud PR-numbrile: 1BA,
1BE, 1BR, 1BV -
Fitting Position: inner,
Rear Axle Lower, Centre - Tootja: FEBEST
- Length [mm]: 45
- Width [mm]: 42
- Thickness [mm]: 45
- Inner Diameter [mm]: 12.3
- Outer Diameter [mm]: 41.5
-
Material: Rubber/
Metal - Weight [kg]: 0.25
- Nimetus: Puks
- Tootja: FEB
Fitting Position: Rear Axle Left, Lower, Rear, outer, Rear Axle Right General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle,
Lower, both sides, Rear, inner -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
-
Nimetus: Puks -
Kndmik AUDI P. A6 04- 11 - Tootja: LMI
SVHC: No information available, please contact the manufacturer!
-
Installatsiooni pool: silla ees,
esisild vasakul, esisild paremal, all -
Piduri-/sõidudünaamika: Sõidukitele koos ABS-
ga - Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 50.4
- Length [mm]: 60
- paired article number: 270327
- Weight [kg]: 0.21
-
Installation Information: Important:
Observe Fitting Instructions - Tootja: ABS
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Nimetus: Control arm bush left=right
- Kvaliteediklass: PJ
Lisainfo: "Tootja: TEKNOROT
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"
-
Fitting Position: Lower,
inner, both sides, Front Axle, Rear - Outer Diameter [mm]: 65.1
- Length 2 [mm]: 56
- Inner Diameter [mm]: 12
- Weight [kg]: 0.3
- Required quantity: 2
- Length 1 [mm]: 80
- Tootja: TEDGUM
-
kombineeritud PR-numbrile: 1BA,
1BE, 1BR, 1BV -
Fitting Position: Rear Axle Lower,
Upper, outer, Centre - Tootja: FEBEST
-
Installatsiooni pool: Esisild,
kahepoolne, üleval - Control/Trailing Arm Type: Control Arm
- Required quantity: 4
- Height [mm]: 40
- Outer Diameter [mm]: 46.3
- Inner Diameter [mm]: 10.1
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.102
- Packaging length [cm]: 11
- Packaging width [cm]: 6
- Packaging height [cm]: 6
- Tootja: MONROE
-
Fitting Position: Front Axle both sides,
Lower, Rear - Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 65
- Height [mm]: 79.9
- Nimetus: ALT 84083AL
- Tootja: ALTE AUTOMOTIVE
-
Installatsiooni pool: Esisild,
vasakul, paremal, väljas, all - Tootja: HUTCHINSON
-
Tootmise kuupäev alates: 09/
04 -
Fitting Position: Front Axle,
Rear, Lower - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65
- for OE number: 4F0407183E
- Tootja: SASIC
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
-
for OE number: 8E0501529G,
8E0501529K, 4F0501529C - Tootja: TRW
Fitting Position: Rear Axle Left, Rear Axle Right, Lower, Rear, outer SVHC: No information available, please contact the manufacturer!
- Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 64.5
- Length [mm]: 80
- paired article number: 270760
- Weight [kg]: 0.29
-
Installation Information: Important:
Observe Fitting Instructions - Tootja: ABS
Installatsiooni pool: silla taga, esisild vasakul, esisild paremal, sees, all
-
Kerenumber (VIN) alates: 8E-
5- 400 001 -
Fitting Position: Rear,
Lower, Front Axle Left, Front Axle Right - Height [mm]: 80
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65
- Supplementary Article/Supplementary Info: without holder
- reinforced version:
- Required quantity: 2
- Replace in pairs only:
-
Nimetus: Puks -
Kndmik VW P. A4 04- - Tootja: MEY
General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.
- Piduri-/sõidudünaamika: sõidukitele ilma ABS
-
Fitting Position: inner,
Front, Rear Axle Lower - Nimetus: Puks
- Tootja: MAX
- PR-numbri jaoks: D2G
- Quantity: 10
- Length [mm]: 40
- Thread Size: M6x1
- Tootja: FEBEST
-
Lisainfo: 2398-
002- PCS10 FEBEST
-
Installatsiooni pool: sees,
esisild alla - Tootja: GSP
- Fitting Position: Front Axle
- for OE number: 8K0 407 515
- Guarantee: 3 years guarantee
- Width [mm]: 90
- Tootja: AT AUTOTEILE GERMANY
General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
-
Fitting Position: behind the axle,
Rear, Lower Front Axle - Inner Diameter [mm]: 65
- Tootja: FEBEST
-
Fitting Position: Rear,
Lower, Front Axle Left, Front Axle Right - Outer Diameter 1 [mm]: 64
- Inner Diameter 1 [mm]: 12
- Thickness [mm]: 80
- Tootja: BGA
- Ehitusaasta kuni: 03.2008
- Quality: OE Performance
- Fitting Position: Front
- Colour: silver
- Weight [g]: 483
- Tootja: GATES
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Nimetus: Control arm bush left=right
- Kvaliteediklass: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI A4 05-/A6 04-
(kvaliteediklass: PJ)"
-
kombineeritud PR-numbrile: 1BA,
1BE, 1BR, 1BV -
Fitting Position: Rear Axle Lower,
Rear, inner - Tootja: FEBEST
-
Lisainfo: FSTADAB-
002
-
Installatsiooni pool: taga,
sees, all, esisild mõlemapoolselt - vajaminev tükihulk: 2
- paired article number: VKDS 331014
- Height [mm]: 80
- Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 64.9
- Tootja: SKF
- Nimetus: SK VKDS331014
-
Fitting Position: Front Axle,
Lower, both sides, Rear, inner -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Outer Diameter [mm]: 63
-
Nimetus: Puks -
Kndmik VW P. A4 04- DOLNY TY L/ P 62, 5MM - Tootja: MAX
-
Fitting Position: Rear,
inner, Lower, Front Axle -
Material: Rubber/
Metal - Mounting Type: Hydro Mount
- Weight [g]: 455
- new version:
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65
- Length [mm]: 65
- Overall Length [mm]: 80
- Nimetus: IM 1314
- Tootja: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- Installatsiooni pool: Esisild
- Hulk: 2
-
Fitting Position: Rear,
inner, Lower Front Axle - Weight [kg]: 0.486
-
Material: Rubber/
Metal - Thickness [mm]: 80
- Required quantity: 2
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 64
- General Information: Bush for control arm
- Tootja: VIKA
-
kombineeritud PR-numbrile: 1BA,
1BE, 1BR, 1BV -
Fitting Position: Rear Axle Lower,
outer, Lower - Tootja: FEBEST
-
Installatsiooni pool: Esisild,
all -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65
- Width [mm]: 80
- SVHC: No SVHC present!
- Nimetus: Puks
- Tootja: FAG
- Ehitusaasta kuni: 03.2008
- Quality: OE Performance
- Fitting Position: Front
- Colour: silver
- Weight [g]: 773
- Tootja: GATES
- Mounting Type: Hydro Mount
-
Fitting Position: both sides,
Rear, Lower Front Axle - Control/Trailing Arm Type: for control arm
- Axle alignment required after fitting:
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Rear,
Lower, Front Axle Left, Front Axle Right - Height [mm]: 80
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65
- Supplementary Article/Supplementary Info: without holder
- reinforced version:
- Required quantity: 2
- Replace in pairs only:
-
Nimetus: Puks -
Kndmik VW P. A4/ A6/ A8/ PASSAT 97- HD - Tootja: MEY
General Information: No risk of leakage: MEYLE-HD full-rubber bushing with optimized rubber shape for a significantly longer lifetime.
- new version:
- Thickness [mm]: 80
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 64
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Lower, Rear, Front Axle Right - Weight [kg]: 0.486
- for OE number: 4D0 407 183 AC
- Observe service information:
-
Nimetus: Puks -
Kndmik VW P. A4/ PASSA - Tootja: FEB
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- new version:
- Thickness [mm]: 80
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Lower, Rear, Front Axle Right - Weight [kg]: 0.484
- Observe service information:
- Nimetus: SW 30 60 0041
- Tootja: SWAG
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
kombineeritud PR-numbrile: 1BA,
1BE, 1BR, 1BV -
Fitting Position: inner,
Rear Axle Lower, Front - Tootja: FEBEST
Laki Auto universaaltooted
TecDoc sõidukite kataloog
TecDoc veokite kataloog