• Materjal: Plastik
• OE-numbri jaoks: 06A 103 247
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Tootja: ABAKUS LORO
• Nimetus: AB 053-028-055

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fabrication Number: GPP-VW-054
• Tootja: NTY

• Fabrication Number: GPP-VW-057
• Tootja: NTY

• Installatsiooni pool: Vändaraam
• Seerianumber: GPP-VW-005
• Tootja: NTY
• Nimetus: NTY GPP-VW-005

• Kuju: T-kuju(T-tükk)
• Materjal: AEM (Etüleenakrülaatkautšuk)
• Vooliku tüüp: Eelvormitud voolik
• Sisend-/väljundite arv: 3
• Tootja: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Üldine informatsioon: PCV pipe
• Tootja: VIKA

• OE-numbri jaoks: 06A 129 101 D
• Installatsiooni pool: Silindripea
• Pikkus (mm): 80
• Laius (mm): 64
• Kõrgus (mm): 54
• Rakendustüüp: juhitav survega
• Klapitüüp: Õhutusklapp, Membraanklapp
• Hooldusinfot jälgida:
• Materjal tihend: FPM (Fluor-Kautschuk)/ACM (Polyacryl-Kautschuk)
• Seerianumber: EPCV-VW-004
• Tootja: NTY
• Nimetus: NTY EPCV-VW-004

• Ehitusaasta kuni: 06.2008
• Õhuvarustus-voolikud/ühendused: ühendustorust klapini (karterituulutus)
• Materjal: Plastik
• Värv: must
• vooliku pikkus [mm]: 100
• Siseläbimõõt 1 [mm]: 17,5
• Siseläbimõõt 2 (mm): 17,5
• Tootja: GATES

• Materjal: AEM (Etüleenakrülaatkautšuk)
• Nimetus: VOOLIK,KARTERITUULUTUS
• Tootja: MAX

• Üldine informatsioon: PCV pipe
• Tootja: VIKA

• Kaal (kg): 0,065
• Tootja: 3RG

• Hulgaühik: Komplekt
• Osade arv [-osaline]: 3
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Tootja: ABAKUS LORO
• Nimetus: AB 053-028-052

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• OE-numbri jaoks: 06A 103 213
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Tootja: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• OE-numbri jaoks: 06A 103 213F
• Tootja: DELLO AUTOMEGA

• Installatsiooni pool: üleval
• Tootja: JP GROUP
• Lisainfo: Breather tube for cylinder head

• Installatsiooni pool: üleval
• Nimetus: VOOLIK,KARTERITUULUTUS
• Tootja: MAX

• OE-numbri jaoks: 06A 103 247
• Pikkus (mm): 49
• Garantii: 3 aastat garantii
• Tootja: AT AUTOTEILE GERMANY

Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Pikkus (mm): 80
• Laius (mm): 64
• Tootja: 3RG

• Ehitusaasta kuni: 06.2008
• Õhuvarustus-voolikud/ühendused: ühendustorust klapini (karterituulutus)
• Material: NBR (nitrile butadiene rubber)
• Colour: black
• Hose Length [mm]: 87
• Inner Diameter 1 [mm]: 31.5
• Inner Diameter 2 [mm]: 18.5
• Tootja: GATES

• Nimetus: PRZEWàD WENTYLACJI SKRZYNI KORBOWEJ VW 1.8T
• Tootja: VAI

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• OE-numbri jaoks: 06A103247
• Kaal (g): 47
• Siseläbimõõt 1 [mm]: 20
• Siseläbimõõt 2 (mm): 22
• Nimetus: Voolik,Karterituulutus
• Tootja: IMP

Üldine informatsioon: The installation of this product can be performed only in a workshop environment by trained professionals

Tootja: OYODO

• Tootja: VAI

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Nimetus: PRZEWàD WENTYLACJI SKRZYNI KORBOWEJ VW PASSAT 1.8T 96-

• Kaal (kg): 0,077
• Tootja: METALCAUCHO

• Garantii: 3 aastat garantii
• Kaal (kg): 0,05
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY
• Nimetus: CE 54SKV760

• Installatsiooni pool: Silindripea
• OE-numbri jaoks: 06A 129 101 D
• Rakendustüüp: juhitav survega
• Kõrgus (mm): 54
• Jälgige sõidukitootja juhiseid:
• Klapitüüp: Õhutusklapp, Membraanklapp
• Pikkus (mm): 80
• Laius (mm): 64
• Hooldusinfot jälgida:
• Materjal tihend: FPM (Fluor-Kautschuk)/ACM (Polyacryl-Kautschuk)
• Nimetus: KLAPP, KARTERITUULUTUS
• Tootja: MAX

• vajaminev tükihulk: 1
• Kaal (g): 73
• Pikkus (mm): 139
• Siseläbimõõt 1 [mm]: 29
• Siseläbimõõt 2 (mm): 16
• Nimetus: Voolik,Karterituulutus
• Tootja: IMP

Üldine informatsioon: The installation of this product can be performed only in a workshop environment by trained professionals

• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Ehitusaasta kuni: 06.2008
• Õhuvarustus-voolikud/ühendused: plokikaanest klapini (karterituulutus)
• Materjal: Plastik
• Värv: must
• vooliku pikkus [mm]: 180
• Siseläbimõõt 1 [mm]: 28,5
• Siseläbimõõt 2 (mm): 15,5
• Nimetus: Voolik,Karterituulutus
• Tootja: GAT

• Seerianumber: GPP-VW-126
• Tootja: NTY

• OE-numbri jaoks: 06B 103 221 G
• Tootja: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Kõrgus (mm): 14
• Klapitüüp: Tagasilöögi klapp
• Laius (mm): 24
• Tehnilisi andmeid jälgida:
• Hooldusinfot jälgida:
• OE-numbri jaoks: 035 103 245 G
• Rakendustüüp: juhitav survega
• Soovituslik vahetusintervall (km): 60 000
• Korpuse materjal: Polyamid 6.6
• Installatsiooni pool: mootoripoolne
• Pikkus (mm): 40
• Soovituslik vahetusintervall (aastad): 3
• Jälgige sõidukitootja juhiseid:
• Nimetus: ODPOWIETRZNIK SKRZYNI KORBOWEJ VW PASSAT 1.8T 00-
• Tootja: VAI

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• OE-numbri jaoks: 6A103213
• Kaal (g): 90
• Nimetus: Voolik,Karterituulutus
• Tootja: IMP

Üldine informatsioon: The installation of this product can be performed only in a workshop environment by trained professionals

• OE-numbri jaoks: 6A1 032 13A M
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Tootja: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: üleval
• Materjal: Plastik
• Siseläbimõõt 1 [mm]: 28,5
• Siseläbimõõt 2 (mm): 15,5
• Garantii: 3 aastat garantii
• Kaal (kg): 0,06
• Värv: must
• vooliku pikkus [mm]: 180
• sobiv sõidukitüübi jaoks: Sõiduauto
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY
• Nimetus: CE 24SKV461

• Installatsiooni pool: Silindripea
• Rakendustüüp: juhitav survega
• Klapitüüp: Õhutusklapp
• Garantii: 3 aastat garantii
• Uus osa:
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Kaal (kg): 0,07
• Nimetus: CE 31SKV010
• Tootja: ESEN SKV

• OE-numbri jaoks: 06A 103 247
• Nimetus: PRZEWàD WENTYLACJI SKRZYNI KORBOWEJ VW
• Tootja: VAI

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Üldine informatsioon: PCV pipe
• Tootja: VIKA

• Rakendustüüp: pneumaatiline
• Üldine informatsioon: Pressure adjustment valve for charger
• Tootja: VIKA

• Installatsiooni pool: üleval
• Kaal (kg): 0,065
• Hooldusinfot jälgida:
• Nimetus: VOOLIK,KARTERITUULUTUS
• Tootja: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Installatsiooni pool: üleval
• Kaal (kg): 0,065
• Nimetus: SW 30 93 6274
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Rakendustüüp: pneumaatiline
• Garantii: 3 aastat garantii
• Uus osa:
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Kaal (kg): 0,11
• Tootja: SKV GERMANY
• Nimetus: CE 31SKV014

• Installatsiooni pool: vasakul
• OE-numbri jaoks: 06B 103 224 B, 06B 103 224 C
• Tootja: METZGER

• Kaal (kg): 0,13
• Rakendustüüp: pneumaatiline
• Tootja: METALCAUCHO

• OE-numbri jaoks: 06A 103 213F
• Tootja: METZGER

• Tootja: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• OE-numbri jaoks: 06A 103 213
• Tootja: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• OE-numbri jaoks: 06A 103 213 F
• Installatsiooni pool: Vändaraam
• Tootja: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Hulgaühik: Komplekt
• Osade arv [-osaline]: 6
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Nimetus: AB 053-028-054
• Tootja: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Üldine informatsioon: PCV pipe
• Tootja: BORSEHUNG

• OE-numbri jaoks: 06A 129 101 D
• Rakendustüüp: juhitav survega
• Kõrgus (mm): 54
• Klapitüüp: Õhutusklapp, Membraanklapp
• Installatsiooni pool: Silindripea
• Pikkus (mm): 80
• Laius (mm): 64
• Materjal tihend: FPM (Fluor-Kautschuk)/ACM (Polyacryl-Kautschuk)
• Nimetus: klapp, karterituulutus
• Tootja: MAX

• Installatsiooni pool: Plokikaas
• Materjal: Metalltoru
• Tootja: METZGER

• Rakendustüüp: pneumaatiline-hüdrauliline
• Tootja: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.