• Lülitusrõhk [bar]: 1,4
• Ühenduste arv: 1
• Väliskeere [mm]: M10x1
• Värvimarkeering: must
• Tootja: JP GROUP
• Lisainfo: PAKENDIS 10 tk

• Lülituspunkt alates [bar]: 0,15
• Lülituspunkt kuni [bar]: 0,35
• Värvimarkeering: sinine
• Ühenduste arv: 1
• Väliskeere [mm]: M10x1
• Tootja: JP GROUP
• Lisainfo: PAKENDIS 10 tk

• Pistikkontaktide arv: 4
• Värvimarkeering: roheline
• Tootja: JP GROUP
• Lisainfo: Sender for water temperature gauge 4 pins

• Keermemõõt: M10x1
• Pikkus (mm): 46
• Võtmekaugus: 24
• Värvimarkeering: valge
• Pistikkontaktide arv: 1
• Tootja: DELLO AUTOMEGA

• Keermemõõt: M10x1
• Pikkus (mm): 46
• Võtmekaugus: 24
• Värv: sinine
• Pistikkontaktide arv: 1
• Tootja: DELLO AUTOMEGA

• Lülituspunkt alates [bar]: 1,6
• Lülituspunkt kuni [bar]: 2
• Tootja: JP GROUP
• Lisainfo: PAKENDIS 10 tk

• Mootorikood: AVF
• Surve (bar): 1
• Võtmekaugus: 24
• Pistikkontaktide arv: 1
• Tootja: KAVO

• Lülituspunkt alates [bar]: 0,75
• Lülituspunkt kuni [bar]: 1,05
• Väliskeere [mm]: M10x1
• Ühenduste arv: 1
• Värvimarkeering: hall
• Lisainfo: PAKENDIS 10 tk

• Pikkus (mm): 46
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Värvimarkeering: must
• Surve alates (bar): 1,2
• Surve (bar) kuni: 1,5
• Läbimõõt [mm]: 3
• Nimetus: OLISURVELšLITUS
• Tootja: MAX

• Lülituspunkt alates [bar]: 0,15
• Pikkus (mm): 46
• Lülituspunkt kuni [bar]: 0,35
• Siseläbimõõt [mm]: 2,54
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 13
• Võtmekaugus: 24
• Ühenduste arv: 1
• Värvimarkeering: sinine
• Pealispind: tsingitud
• Kaal (kg): 0,031
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: OLISURVELšLITUS
• Tootja: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pikkus (mm): 46
• Võtmekaugus: 24
• Värvimarkeering: sinine
• Pistikkontaktide arv: 1
• Keermemõõt: M10x1
• Surve alates (bar): 0,15
• Surve (bar) kuni: 0,35
• Läbimõõt [mm]: 3
• Nimetus: OLISURVELšLITUS
• Tootja: MAX

• Pistikukatte kuju: D-kuju
• Rakendustüüp: hüdrauliline
• Värvimarkeering: pruun
• Keermemõõt: M 10
• Keerme samm (mm): 1
• Pistikkontaktide arv: 1
• Lülitusulatus (bar): 0,55 - 0,85
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: TOPRAN HANS PRIES

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Pikkus (mm): 46
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Värvimarkeering: valge
• Pistikkontaktide arv: 1
• Surve (bar): 1,8
• Nimetus: OLISURVELšLITUS
• Tootja: MAX

• Mootorikood: AVF
• Värv: pruun
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Piirangutega toode/piirangu info: koos tihendiga
• Nimetus: OLISURVELšLITUS
• Tootja: MAX

• Pikkus (mm): 46
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Värvimarkeering: hall
• Pistikkontaktide arv: 1
• Surve alates (bar): 0,75
• Surve (bar) kuni: 1,05
• Läbimõõt [mm]: 2
• Nimetus: OLISURVELšLITUS
• Tootja: MAX

• Seerianumber: ECC-AU-004
• Pistiku värv: pruun
• Pistikkontaktide arv: 1
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: NTY

• OE-numbri jaoks: 1100619
• Tootja: KAMOKA

• Pikkus (mm): 46
• Lülituspunkt alates [bar]: 0,15
• Lülituspunkt kuni [bar]: 0,35
• Siseläbimõõt [mm]: 2,54
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 13
• Võtmekaugus: 24
• Ühenduste arv: 1
• Värvimarkeering: sinine
• Pealispind: tsingitud
• Kaal (kg): 0,031
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: SW 30 23 0002
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lülituspunkt alates [bar]: 1,6
• Pikkus (mm): 46
• Lülituspunkt kuni [bar]: 2
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 13
• Võtmekaugus: 24
• Ühenduste arv: 1
• Värvimarkeering: valge
• Pealispind: tsingitud
• Kaal (kg): 0,03
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: OLISURVELšLITUS
• Tootja: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Värv: hall
• Surve (bar): 0,9
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Värv: must
• Surve (bar): 1,4
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Värv: valge
• Surve (bar): 1,8
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Värv: sinine
• Lülituspunktid [bar]: 0,25
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Lülituspunkt alates [bar]: 1,2
• Pikkus (mm): 46
• Lülituspunkt kuni [bar]: 1,5
• Siseläbimõõt [mm]: 2,54
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 13
• Võtmekaugus: 24
• Ühenduste arv: 1
• Värvimarkeering: must
• Lülituspunktid [bar]: 1,2
• Pealispind: tsingitud
• Kaal (kg): 0,031
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: OLISURVELšLITUS
• Tootja: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Piirangutega toode/piirangu info: koos tihendiga
• Keermemõõt: M10x1,0
• Lülitusulatus (bar): 0,15 - 0,35
• Värv: sinine
• Kaal (kg): 0,038
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pikkus (mm): 46
• Lülituspunkt alates [bar]: 1,6
• Lülituspunkt kuni [bar]: 2
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 13
• Võtmekaugus: 24
• Ühenduste arv: 1
• Värvimarkeering: valge
• Pealispind: tsingitud
• Kaal (kg): 0,03
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: SW 30 23 0001
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Surve (bar): 0,25
• Keermemõõt: M10 x 1
• tehnilise informatsiooni number: circuit N.C.
• Tootja: ERA

• Hulk: 2
• Kaal (kg): 0,015
• Ühenduste arv: 2
• Kruvipikkus kruvipea all [mm]: 20
• Värv: hall
• Värvimarkeering: hall
• Üldine informatsioon: temperature sensor; grey; 2 pins
• Tootja: VIKA

• Käigukasti liik: Käigukast 5 käiku, Käigukast 6 käiku
• Pistikkontaktide arv: 2
• Garantii: 3 aastat garantii
• Kaal (kg): 0,05
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY
• Nimetus: CE 17SKV555

• Hulk: 2
• Kaal (kg): 0,015
• Ühenduste arv: 2
• Kruvipikkus kruvipea all [mm]: 20
• Värv: must
• Värvimarkeering: hall
• Üldine informatsioon: temperature sensor; black
• Tootja: VIKA

• Hulk: 1
• Kaal (kg): 0,02
• Ühenduste arv: 4
• Välisläbimõõt [mm]: 20
• Pistikuteostus-ID: 4
• Värv: roheline
• vajaminev tükihulk: 1
• Üldine informatsioon: temperature sensor; green; 4 pins
• Tootja: VIKA

• Lülituspunkt alates [bar]: 0,75
• Pikkus (mm): 46
• Lülituspunkt kuni [bar]: 1,05
• Siseläbimõõt [mm]: 2,48
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 13
• Võtmekaugus: 24
• Ühenduste arv: 1
• Värvimarkeering: hall
• Lülituspunktid [bar]: 0,7
• Pealispind: tsingitud
• Kaal (kg): 0,031
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: OLISURVELšLITUS
• Tootja: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Seerianumber: ECT-AU-004
• Pistikkontaktide arv: 4
• Värvimarkeering: roheline
• Pistikukatte kuju: ovaalne
• Tootja: NTY

• Mootorikood: AVF
• Ühenduste arv: 4
• Tootja: 3RG

• Keermemõõt: M10x1,0
• Värv: valge
• Kaal (kg): 0,033
• Surve alates (bar): 1,6
• Surve (bar) kuni: 2
• Tootja: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pikkus (mm): 46
• Lülituspunkt alates [bar]: 1,2
• Lülituspunkt kuni [bar]: 1,5
• Siseläbimõõt [mm]: 2,54
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 13
• Võtmekaugus: 24
• Ühenduste arv: 1
• Värvimarkeering: must
• Lülituspunktid [bar]: 1,2
• Pealispind: tsingitud
• Kaal (kg): 0,031
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: SW 30 23 0003
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Seerianumber: ECT-AU-005
• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Anduritüüp: NTC-andur
• Pistiku värv: must

• Surve (bar): 8,5
• Korpusevärv: tumepruun
• Keermemõõt: M10×1-6g
• Läbimõõt [mm]: 24
• Võtmekaugus: 24
• Pistikkontaktide arv: 1
• Nimetus: OLISURVELšLITUS
• Tootja: DLP
• Kvaliteediklass: PJ

Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Kerenumber (VIN) alates: 8D-Y-000 001, 8E-1-000 001
• Kerenumber (VIN) kuni: 8D-1-200 000
• Pistikkontaktide arv: 4
• Värv: roheline
• Tootja: DELLO AUTOMEGA

• Mootorikood: AVF
• Värv: pruun
• Surve (bar) kuni: 0,85
• Surve alates (bar): 0,55
• Surve (bar): 0,7
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Tootja: FACET

• Lülitusrõhk [bar]: 0,7
• Keermemõõt: M10x1.0
• Anduritüüp: lahtine anduri ehitusviis
• Tootja: VERNET

• Mootorikood: AVF
• Värv: pruun
• Surve (bar) kuni: 0,85
• Surve alates (bar): 0,55
• Surve (bar): 0,7
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Nimetus: OLISURVELšLITUS
• Tootja: EPS

• Lülituspunkt alates [bar]: 0,75
• Pikkus (mm): 46
• Lülituspunkt kuni [bar]: 1,05
• Siseläbimõõt [mm]: 2,48
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 13
• Võtmekaugus: 24
• Ühenduste arv: 1
• Värvimarkeering: hall
• Lülituspunktid [bar]: 0,7
• Pealispind: tsingitud
• Kaal (kg): 0,031
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: SW 30 23 0004
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Keermemõõt: M 10x1
• Korpusevärv: pruun
• Surve (bar): 0,7
• Tootja: FAE

• Pistikukatte kuju: D-kuju
• Materjal: Plastik
• Pistikkontaktide arv: 4
• Pistikute teostus: Female
• Anduritüüp: NTC-andur
• Võtmekaugus: 0
• Keermemõõt: 0
• Tootja: NISSENS

Tehniline informatsioon: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Korpusevärv: must
• Pistikkontaktide arv: 4
• Võtmekaugus: 0
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: DLP

• Installatsiooniläbimõõt (mm): 20
• Pistikkontaktide arv: 4
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MAX

• Värvimarkeering: roheline
• Pistikukatte kuju: ovaalne
• Anduritüüp: NTC-andur
• Pistikkontaktide arv: 4
• OE-numbri jaoks: 059 919 501A, 1 124 770
• Tootja: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Anduritüüp: NTC-andur
• Montaaživiis: klemmitud
• Pistikukatte kuju: D-kuju
• Pistikkontaktide arv: 4
• OE-numbri jaoks: 059919501A
• Piirangutega toode/piirangu info 2: koos osadega
• Nimetus: Andur,Jahutusvedeliku temp.
• Tootja: NRF

• Anduritüüp: NTC-andur
• Piirangutega toode/piirangu info 2: ilma rõngastihendita
• Värv: roheline
• Pistikkontaktide arv: 4
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MEY

• Pistikkontaktide arv: 4
• Piirangutega toode/piirangu info: koos tihendiga
• Piirangutega toode/piirangu info 2: koos klemmihoidjaga
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Kaal (kg): 0,02
• Ühenduste arv: 4
• Välisläbimõõt [mm]: 20
• Pistikuteostus-ID: 4
• Värv: must
• vajaminev tükihulk: 1
• Üldine informatsioon: temperature sensor; black; 4 pins
• Tootja: VIKA

• Keermemõõt: M 10x1
• Korpusevärv: hall
• Surve (bar): 0,9
• Tootja: FAE

• Keermemõõt: 20 mm
• Pins'ide arv: 4
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: VER

• Kaal (kg): 0,041
• Tootja: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mootorikood: AVF
• Korpusevärv: roheline
• Vastab originaalosa värvile: must
• Tootja: FACET

• Keermemõõt: M20
• Pistikkontaktide arv: 2
• Korpusevärv: hall
• Pistikukatte kuju: ovaalne
• Tootja: ERA

• Lülitusulatus (bar): 0.55/0.85BAR
• Värv: pruun
• Üldine informatsioon: oil pressure switch
• Tootja: BORSEHUNG

• OE-numbri jaoks: 078 919 501 C
• Tootja: TRUCKTEC

• Pistikkontaktide arv: 4
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Värv: roheline
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Mootorikood: AVF
• Korpusevärv: roheline
• Vastab originaalosa värvile: must
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: EPS

• Väändejõud alates [Nm]: 20
• Pinge [V]: 12
• Lüliti funktsioon: Lukustaja
• Voolutugevus (A): 0,15
• Tolerants (%): 15
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Surve alates (bar): 0,555
• Surve (bar) kuni: 0,85
• Pistikkontaktide arv: 1
• Vastab originaalosa värvile: pruun
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Tootja: HELLA

• Lülitusrõhk alates [bar]: 0,55
• Lülitusrõhk kuni [bar]: 0,85
• Keermemõõt: M10x1
• Vastab originaalosa värvile: pruun, must
• Tootja: METZGER

• Kerenumber (VIN) alates: 8E-1-000 001
• Kerenumber (VIN) kuni: 8E-5-400 000
• Surve alates (bar): 0,55
• Surve (bar) kuni: 0,85
• Lüliti funktsioon: Lukustaja
• Värv: pruun
• Võtmekaugus: 24
• Keermemõõt: M10 x 1,0
• Pistikkontaktide arv: 1
• Nimetus: OLISURVELšLITUS
• Tootja: MEY

• Pistikkontaktide arv: 4
• Värv: roheline
• Piirangutega toode/piirangu info: koos tihendiga
• Versioon: IAM
• soovitava lisavarustuse artiklinumber: 0905458
• Võimsus [W]: 0,06
• Tootja: METZGER

• Pistikkontaktide arv: 2
• Värvimarkeering: hall
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Montaaživiis: pistetud
• Pinge [V]: 12
• Piirangutega toode/piirangu info: koos tihendiga
• Värv: roheline
• Anduritüüp: NTC-andur
• Pistikkontaktide arv: 4
• Piirangutega toode/piirangu info 2: koos turvarõngaga
• Vastab originaalosa värvile: roheline, must
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Nimetus: Andur,Jahutusvedeliku temp.
• Tootja: HEL

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Kaal (kg): 0,017, 0,027
• Piirangutega toode/piirangu info: koos tihendiga
• OE-numbri jaoks: 059 919 501 A
• Värvimarkeering: roheline
• Vedrukuju: Kinnitusvedru
• Pistikkontaktide arv: 4
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Ühenduste arv: 2
• Värvimarkeering: hall
• Kruvipikkus kruvipea all [mm]: 20
• Kaal (kg): 0,03
• Piirangutega toode/piirangu info: koos tihendiga, hoidevedruga
• Nimetus: SW 30 92 9318
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.