• Pistikkontaktide arv: 4
• Piirangutega toode/piirangu info 2: ilma kaablita
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Tootja: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Pistikkontaktide arv: 6
• Piirangutega toode/piirangu info 2: ilma kaablita, koos plastiksokliga
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Tootja: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Piirangutega toode/piirangu info 2: koos pistikuga, koos kaabliga
• OE-numbri jaoks: 4D0971993
• Pistikkontaktide arv: 3
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Nimetus: Kaabliparanduskomplekt, ktuserohu andur
• Tootja: ABA

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• tootmise kuupäev kuni: 05.06.2018
• Pistikkontaktide arv: 3
• Installatsiooni pool: Silindripea
• Piirangutega toode/piirangu info 2: koos rõngastihendiga, ilma kaablita
• Pistikukatte kuju: ovaalne
• Korpuse materjal: GFK (klaaskiuga tugevdatud plastmass)
• Tootja: TOPRAN HANS PRIES

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Mootorikood: DESA
• Värv: must
• Pistikute teostus: Kruvikontakt
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: EPS

• Mootorikood: DESA
• Värv: must
• Pistikute teostus: Kruvikontakt
• Tootja: FACET

• Hulk: 1
• Pistikkontaktide arv: 3
• Nimetus: DE SS12308-12B1
• Tootja: DELPHI

• Mootorikood: DESA
• Keermemõõt: M12x1,5
• Võtmekaugus: 16
• Tootja: FACET

• Heitgaaside normatiiv: Euro 4 (D4), Euro 5
• Kerenumber (VIN) alates: FY-H-000 001
• Tootja piirang: VAG
• Pistikkontaktide arv: 4
• Kaablipikkus (mm): 175
• Kaabli ristlõige [mm²]: 0,75
• Kokkupuutepind: hõbetatud
• Piirangutega toode/piirangu info: Pistikuhülsi korpusega, koos tihenditega
• Piirangutega toode/piirangu info 2: koos ühendusega
• juhtmeisolatsiooni materjal: Silikoon
• temperatuurivahemik alates [°C]: −25
• Temperatuurivahemik kuni [°C]: +140
• Pistiku kesta tüüp: Pistikuhülsi korpus
• SVHC: SVHS aineid ei esine
• Nimetus: Kaabli remondikomplekt, ohumassimootja
• Tootja: HBE

• vajaminev tükihulk: 1
• Pistikkontaktide arv: 3
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Nimetus: HE 6PU358380651
• Tootja: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• PR-numbri jaoks: TD1
• tootmise kuupäev kuni: 14.06.2021
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Pistikkontaktide arv: 3
• Nimetus: Andur,Nukkvollipositsioon
• Tootja: MEY

• Mootorikood: DESA
• vajaminev tükihulk: 1
• Nimetus: EP 1.953.774
• Tootja: EPS

• Seerianumber: ECM-AU-005
• Tootja: NTY
• Nimetus: NTY ECM-AU-005

• Mootorikood: DESA
• vajaminev tükihulk: 1
• Tootja: FACET

• Pistikkontaktide arv: 3
• Tootja: JPN

• Üldine informatsioon: pressure sensor
• Tootja: VIKA

• Pistikkontaktide arv: 3
• Pistikukatte kuju: D-kuju
• Ühenduste arv: 2
• Kvaliteet: OE EQUIVALENT
• OE-numbri jaoks: 03L906051B
• Tootja: MEAT&DORIA

• Üldine informatsioon: hall sender camshaft
• Tootja: VIKA

• Tootja piirang: VAG
• Pistikuteostus-ID: Code A
• Kaablipikkus (mm): 175
• Pistikkontaktide arv: 3
• Kaabli ristlõige [mm²]: 0,75
• Kokkupuutepind: hõbetatud
• juhtmeisolatsiooni materjal: Silikoon
• Piirangutega toode/piirangu info: Pistikuhülsi korpusega, koos tihenditega
• Piirangutega toode/piirangu info 2: koos ühendusega
• temperatuurivahemik alates [°C]: −25
• Temperatuurivahemik kuni [°C]: +140
• SVHC: SVHS aineid ei esine
• Nimetus: Kaabli remondikomplekt, heitgaasi rohuandur
• Tootja: HBE

• Üldine informatsioon: Pressure difference sensor
• Tootja: BORSEHUNG

• Väljalaskesüsteem: enne tahmafiltrit
• Pistikukatte kuju: D-kuju
• Pistikkontaktide arv: 3
• Surve alates (Pa): −14 000
• Surve (Pa) kuni: 100 000
• Nimetus: Andur, heitgaasisurve
• Tootja: NRF

Tootja: BOSCH

• Pistikkontaktide arv: 3
• Surve alates [kPA]: 50
• Tootja: DLP

Nimetus: CZUJNIK CI—N. POWIETRZA AUDI A1, A3, A4, A5, A6, Q2, Q3, Q5, TT 2,0 TDI 08-

• Üldine informatsioon: Pressure difference sensor
• Tootja: BORSEHUNG

• Mootorikood: DESA
• Surve alates [kPA]: 29
• Surve kuni [kPA]: 400
• Väljundpinge alates [V]: 0,25
• Väljundpinge kuni [V]: 4,48
• Nimetus: EP 1.993.327
• Tootja: EPS

• Mootorikood: DESA
• Surve alates [kPA]: 29
• Surve kuni [kPA]: 400
• Väljundpinge alates [V]: 0,25
• Väljundpinge kuni [V]: 4,48
• Tootja: FACET

• Mootorikood: DESA
• Väljalaskesüsteem: enne tahmafiltrit
• Väljundpinge alates [V]: 0,5
• Väljundpinge kuni [V]: 4,5
• Tootja: FACET

• vajaminev tükihulk: 1
• Montaaživiis: kruvitud
• Piirangutega toode/piirangu info: koos tihenditega
• Pistikkontaktide arv: 3
• Anduritüüp: Impulssandur
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Nimetus: ANDUR,NUKKVOLLIPOSITSIOON
• Tootja: HEL

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Üldine informatsioon: Pressure difference sensor
• Tootja: BORSEHUNG

• Pistikkontaktide arv: 3
• Surve alates (Pa): 48 500
• Surve (Pa) kuni: 400 000
• Tootja: FAE

• Pistikkontaktide arv: 3
• Pistikukatte kuju: D-kuju
• Ühenduste arv: 1
• OE-numbri jaoks: 04L906051B
• Tootja: MEAT&DORIA

Tootja: NRF KLIMATYZACJA

• Installatsiooni pool: Tahmaosakeste filter
• Pistikkontaktide arv: 3
• Nimetus: ANDUR, HEITGAASISURVE
• Tootja: MEY

• Korpusetüüp: koos korpusega
• Korpuse materjal: Plastik
• Pinge [V]: 12
• Pikkus (mm): 110
• Seerianumber: EPP-AU-016
• Tootja: NTY

• Piirangutega toode/piirangu info 2: koos kaabliga
• Kaablipikkus (mm): 420
• pikkus üle kõige (mm): 560
• Pistikkontaktide arv: 2
• Pistikukatte kuju: ovaalne
• Pistiku värv: pruun
• Keermemõõt: M14 x 1,5
• Võtmekaugus: 17
• Anduritüüp: PTC-andur
• Nimetus: VA 368919
• Tootja: VALEO

• Väljalaskesüsteem: enne tahmafiltrit
• Montaaživiis: kruvitud
• Pistikkontaktide arv: 3
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Nimetus: CZUJNIK CI—N. SPALIN VW GOLF 2,0TDI 14-
• Tootja: HEL

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Pistiku värv: must
• Seerianumber: EGT-AU-054
• Kaablipikkus (mm): 490
• Tootja: NTY

• Väljalaskesüsteem: enne tahmafiltrit
• Pistikkontaktide arv: 3
• Avamisrõhk [kPa]: 14
• Tootja: DELPHI

• Üldine informatsioon: Fuel pressure sensor
• Tootja: BORSEHUNG

• PR-numbri jaoks: TD1
• Keermemõõt: M18 x 1,5
• Võtmekaugus: 27
• Pistikkontaktide arv: 3
• Nimetus: Andur,ktuserohk
• Tootja: MEY

• Piirangutega toode/piirangu info 2: ilma kaablita
• Installatsiooni sügavus (mm): 24
• Pistikkontaktide arv: 3
• Versioon: IAM
• Tootja: METZGER

• OE-numbri jaoks: 03L 906 461 A
• Tootja: KAMOKA

• Pistikkontaktide arv: 3
• Pistikukatte kuju: D-kuju
• Ühenduste arv: 2
• OE-numbri jaoks: 03L906051D
• Tootja: MEAT&DORIA

• Väljalaskesüsteem: enne tahmafiltrit
• OE-numbri jaoks: 03L 906 051 B
• Kinnitusaukude hulk: 1
• Ülekandeliinide arv: 2
• Pistikukatte kuju: D-kuju
• Pistikkontaktide arv: 3
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mootorikood: DESA
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Üldine informatsioon: pressure sensor
• Tootja: VIKA

• Installatsiooni pool: pärast tahmafiltrit
• OE-numbri jaoks: 4M0 906 088 AB
• pikkus üle kõige (mm): 670
• Kaablipikkus (mm): 540
• Pistikkontaktide arv: 2
• Pistikukatte kuju: D-kuju
• Garantii: 3 aastat garantii
• Väljalaskesüsteem: pärast tahmafiltrit
• Kaal (kg): 0,09
• Kuju: otse
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY
• Nimetus: CE 30SKV380

• Pistikukatte kuju: D-kuju
• Pistikkontaktide arv: 2
• Pinge [V]: 12
• Installatsiooni sügavus (mm): 25
• Kaablipikkus (mm): 724
• Keermemõõt: M14x1.5
• Piirangutega toode/piirangu info: sünteetilise määrdega
• Tootja: NRF

• Installatsiooni pool: pärast tahmafiltrit
• Komponendinumber: G 527, G 648
• Pistikkontaktide arv: 2
• Montaaživiis: kruvitud
• Pistiku värv: oranž
• Anduritüüp: PTC-andur
• Kaablipikkus (mm): 810
• pikkus üle kõige (mm): 940
• Keermemõõt: M 14
• Keerme samm (mm): 1,5
• Pistikukatte kuju: D-kuju
• Materjal, ühenduspistik: GFK (klaaskiuga tugevdatud plastmass)
• Piirangutega toode/piirangu info 2: koos kaabliga
• Korpuse materjal: Kõrgekvaliteetne teras
• Kruvipea-/Mutriprofiil: Kuuskant
• Kuju: otse
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Tootja: TOPRAN

Väljalaskesüsteem: Sõidukile tehases sisseehitatud tahma-/partiklifiltriga Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• vajaminev tükihulk: 1
• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Pistikukatte kuju: ovaalne
• Piirangutega toode/piirangu info 2: ilma kaablita
• Nimetus: Andur,Nukkvollipositsioon
• Tootja: VAL

• Nimetus: Andur, heitgaasisurve
• Tootja: BOS

• Kerenumber (VIN) alates: FY-H-000 001
• Mootorikood: DESA, DETA
• Plokieraldus:
• Anduritüüp: Rõhuerinevuse andur
• Väljundpinge kuni [V]: 5
• Mõõtepiirkond alates [kPa]: −14
• Mõõtepiirkond kuni [kPa]: 100
• Pistikkontaktide arv: 3
• Kinnitusaukude hulk: 1
• Piirangutega toode/piirangu info: ilma lisavarustuseta
• Installatsiooni pool: Tahmaosakeste filter
• Tootja: PIERBURG

• Läbimõõt survetorusikuühendus [mm]: 5, 6,5
• Pikkus [m]: 1
• Materjal: Silikoon
• keem.omadus: õlikindel
• temperatuurivahemik alates [°C]: −40
• Temperatuurivahemik kuni [°C]: +350
• Pingutusala alates [mm]: 10, 11, 11,5, 12,5
• Pingutusala kuni [mm]: 12,5, 13,5, 14, 15
• SVHC: SVHS aineid ei esine
• Tootja: HBE

Väljalaskesüsteem: Sõidukile tehases sisseehitatud tahma-/partiklifiltriga Piirangutega toode/piirangu info 2: ühendusjuhtmestikuga, koos kaitsevoolikuga, koos nugisekaitsega, koos kammitsatega Tehniline informatsioon: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Nimetus: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• Pistikukatte kuju: D-kuju
• Pistikkontaktide arv: 2
• Pinge [V]: 12
• Installatsiooni sügavus (mm): 30
• Kaablipikkus (mm): 715
• Keermemõõt: M14x1.5
• Piirangutega toode/piirangu info: sünteetilise määrdega
• Nimetus: Andur, heitgaasitemperatuur
• Tootja: NRF

• Mootorikood: DESA
• vajaminev tükihulk: 1
• Korpusetüüp: koos korpusega
• Pikkus (mm): 110
• Siseläbimõõt [mm]: 80
• Välisläbimõõt [mm]: 80
• Nimetus: EP 1.991.446
• Tootja: EPS

• Installatsiooni pool: katalüsaatori ees
• Heitgaaside normatiiv: Euro 6+
• vajaminev tükihulk: 1
• PR-numbri jaoks: 7MM
• Mootorikood: DETA
• Montaaživiis: kruvitud
• Pistikkontaktide arv: 2
• Kaablipikkus (mm): 497
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Nimetus: HE 6PT358226281
• Tootja: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Installatsiooni pool: pärast tahmafiltrit
• Heitgaaside normatiiv: Euro 6+
• vajaminev tükihulk: 1
• PR-numbri jaoks: 7MM
• Mootorikood: DETA
• Montaaživiis: kruvitud
• Pistikkontaktide arv: 2
• Kaablipikkus (mm): 750
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Nimetus: HE 6PT358226311
• Tootja: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Korpusetüüp: koos korpusega
• Tootja: VDO

• Lambda andur: Sond, Lineaarne lambda andur, soojendatud
• Installatsiooni pool: katalüsaatori ees
• Hulk: 1
• Kaablipikkus (mm): 831
• Nimetus: SONDA LAMBDA AUDI A4, A5, A6, Q5 13-
• Tootja: DLP

• Installatsiooni pool: pärast tahmafiltrit
• Pistikkontaktide arv: 2
• Kaablipikkus (mm): 800
• Anduritüüp: PTC-andur
• Nimetus: Andur, heitgaasitemperatuur
• Tootja: MEY

• Installatsiooni pool: katalüsaatori ees
• Tootja: BOSCH

• PR-numbri jaoks: T98
• Installatsiooni pool: Tahmaosakeste filter
• Pistikkontaktide arv: 3
• Tootja: METZGER

• Takistusliik: Hitzdrahtmassensensor
• Ühenduste arv: 4
• Kaal (kg): 0,18
• Korpusetüüp: koos korpusega
• Tootja: FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: DETA
• Installatsiooni pool: pärast tahmafiltrit
• Tootja: BOSCH

• Korpusetüüp: koos korpusega
• Pistikkontaktide arv: 4
• Pistikukatte kuju: ristkülik
• Installatsiooni pool: Õhufiltrikorpus
• Kinnitusaukude hulk: 2
• Piirangutega toode/piirangu info 2: ilma rõngastihendita, koos integreeritud võrega
• soovitatav remondimahtu suurendamine: Õhufilter
• soovitava lisavarustuse artiklinumber: 113 883
• Uus osa:
• Vana detaili tagastus mittevajalik:
• Tootja: TOPRAN

Korpuse materjal: Plastik, PBT (Polybutylenterephthalat), GFK (klaaskiuga tugevdatud plastmass) Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Kvaliteet: OE EQUIVALENT
• OE-numbri jaoks: 0281002956
• Tootja: MEAT&DORIA

• Korpusetüüp: koos korpusega
• Pistikkontaktide arv: 4
• Pistikute teostus: Male
• Korpusevärv: must
• Pinge [V]: 12
• soovitatav remondimahtu suurendamine: Õhufilter
• Tootja: DELPHI
• Nimetus: DE AF10397-12B1

• vajaminev tükihulk: 1
• Montaaživiis: Toruotsakud
• Pistikkontaktide arv: 4
• Läbimõõt õhuvõtuühendus [mm]: 80
• Monteerimist/demonteerimist peab tegema spetsialist!:
• SVHC: 7439-92-1; plii
• Nimetus: HE 8ET009149441
• Tootja: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Installatsiooni pool: Kütusetee
• Pistikkontaktide arv: 3
• Pistiku värv: must
• Keermemõõt: M18x1,5
• Tootja: METZGER

• PR-numbri jaoks: T98
• OE-numbri jaoks: 05L906088J
• Installatsiooni pool: enne tahmafiltrit
• Pistiku värv: pruun
• Tootja: METZGER

• soovitatav remondimahtu suurendamine: Õhufilter
• Nimetus: OHUMASSIMOOTJA
• Tootja: BOS

• Installatsiooni pool: Kütusetorustik
• Pistikkontaktide arv: 4
• Ühenduste arv: 2
• Pistiku värv: must
• Tootja: METZGER

• kombineeritud PR-numbrile: TD1+7MM, TD1+7MU, TD1+7MW
• Installatsiooni pool: enne tahmafiltrit
• Nimetus: DRM 02369
• Tootja: DR.MOTOR AUTOMOTIVE

• kombineeritud PR-numbrile: TD1+7MM, TD1+7MU, TD1+7MW
• Installatsiooni pool: enne tahmafiltrit
• Tootja: METZGER

• vajaminev tükihulk: 1
• Anduritüüp: Hallsensor
• Montaaživiis: Kruviühendus
• Kuju: ovaalne
• Ühenduste arv: 3
• Installatsiooni sügavus (mm): 24
• Piirangutega toode/piirangu info 2: koos rõngastihendiga