• Kütusesüsteemi seadmed: Karburaator
• Filter type: In-Line Filter
• Height [mm]: 142
• Outer Diameter [mm]: 32
• Outer Diameter 1 [mm]: 37
• Tootja: JP GROUP
• Lisainfo: Fuel filter

• Kütusesüsteemi seadmed: Karburaator
• Kogus pakendis: 24
• Filter type: In-Line Filter
• Outer Diameter [mm]: 35.5
• Height [mm]: 136
• Tootja: HENGST FILTER

• Filter type: In-Line Filter
• Height [mm]: 105
• Outer Diameter [mm]: 36
• Diameter 3 [mm]: 6
• Diameter 4 [mm]: 6
• Tootja: PURFLUX

• Filter type: In-Line Filter
• Inlet Ø [mm]: 6
• Outlet Ø [mm]: 6
• Height [mm]: 125
• Fuel Type: Petrol
• Outer Diameter [mm]: 48
• Tootja: KAMOKA

• Mootorikood: SF
• Filter type: In-Line Filter
• Height [mm]: 116
• Outer Diameter [mm]: 51
• Outer Diameter 1 [mm]: 44
• Inlet Ø [mm]: 6
• Outlet Ø [mm]: 6
• Tootja: VALEO

• Kütusesüsteemi seadmed: Karburaator
• Filter type: In-Line Filter
• Height [mm]: 118
• Outer Diameter [mm]: 48
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• SVHC: No SVHC present!
• Tootja: FILTRON

• Kütusesüsteemi seadmed: Karburaator
• Filter type: In-Line Filter
• Length [mm]: 97
• Outer Diameter [mm]: 49
• Diameter 1/Diameter 2 [mm]: IN/OUT: 8
• for OE number: 532281
• Tootja: ASHIKA-FILTRY

• Kütusesüsteemi seadmed: Karburaator
• Filter type: In-Line Filter
• Length [mm]: 97
• Outer Diameter [mm]: 49
• Diameter 1/Diameter 2 [mm]: IN/OUT: 8
• for OE number: 532281
• Tootja: JAPKO

• Filter type: In-Line Filter
• Diameter [mm]: 48
• Height [mm]: 117.5
• Inlet Ø [mm]: 7.2
• Outlet Ø [mm]: 7.2
• Tootja: BOSCH
• Nimetus: BS F026403169

• Kogus pakendis: 10
• Filter type: In-Line Filter
• Diameter [mm]: 30
• Height [mm]: 143.5
• Inlet Ø [mm]: 6
• Outlet Ø [mm]: 6.1
• Net Weight [g]: 17
• Packaging width [cm]: 4
• Packaging height [cm]: 4
• Packaging length [cm]: 8
• Nimetus: KN KL15OF
• Tootja: KNECHT

• Number of Teeth: 121
• Length [mm]: 1,153
• Width [mm]: 18
• Tooth Pitch [mm]: 9.525
• Tootja: BOSCH
• Nimetus: BS 1987949018

• Outer Diameter [mm]: 72
• Width [mm]: 20
• Lisainfo: Tension pulley for timing belt

• Vedavad seadmed: Nukkvõll
• Sõiduki varustusvariant: CR
• Number of Teeth: 121
• Width [mm]: 18
• Nimetus: DA 94017
• Tootja: DAYCO

• Width [mm]: 18
• Number of Teeth: 121
• Belts: with trapezoidal tooth profile
• Weight [kg]: 0.5
• for OE number: 056 109 119 A
• Observe service information:
• Tootja: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vedavad seadmed: Nukkvõll
• Number of Teeth: 121
• Packaging length [cm]: 25.5
• Packaging width [cm]: 16
• Packaging height [cm]: 3
• Weight [kg]: 0.139
• Width [mm]: 18
• Tooth Pitch [mm]: 9.525
• Tootja: CONTITECH
• Nimetus: CT 637

• Vedavad seadmed: Nukkvõll
• Soovitatava eritööriista tootenumber: GAT4740
• Article number of the recommended special tool: STT-1
• Tensile Cord Material: Fiberglass
• Belt Material: Polychloroprene (Neoprene)
• Colour: black
• Number of Teeth: 121
• Width [mm]: 18
• Tooth Pitch [mm]: 9.525
• Length [mm]: 1,153
• Tootja: GATES

• Installatsiooni pool: Tagasild
• Kogus pakendis: 4
• Width [mm]: 31
• Brake System: ATE
• Supplementary Article/Info 2: with handbrake lever
• Inner brake drum diameter [mm]: 180
• Tootja: BREMBO
• Nimetus: BR S 85 507

• Vedavad seadmed: Nukkvõll
• Sõiduki varustusvariant: HSN
• Number of Teeth: 121
• Width [mm]: 18
• Nimetus: DA 94737
• Tootja: DAYCO

• Width [mm]: 20
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 72
• Material: Metal
• Weight [kg]: 0.3
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Piduriseade: sõidukitele ilma pidurijõu regulaatorita
• Width [mm]: 31
• Outer Diameter [mm]: 180
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Weight [kg]: 1.14
• Tootja: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Width 1 [mm]: 24
• Outer Diameter 1 [mm]: 72
• Tootja: SNR
• Nimetus: SN GT357.01

• Diameter [mm]: 72
• Width [mm]: 20
• Tensioner Pulley Actuation: Manual
• Nimetus: SK VKM11000
• Tootja: SKF

• Installatsiooni pool: Esisild
• mudeli koodi jaoks: GLE, GTE, Sport
• Kogus pakendis: 4
• FMSI Code: D147-7079
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 20574
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 104.2
• Width 2 [mm]: 104.2
• Height 1 [mm]: 67.1
• Height 2 [mm]: 67.1
• Thickness 1 [mm]: 19.1
• Thickness 2 [mm]: 19.1
• Nimetus: DE LP179
• Tootja: DELPHI

• Sõiduki varustusvariant: TENS
• Belt Pulley Ø [mm]: 72
• Height 1 [mm]: 20.5
• Height 2 [mm]: 27.5
• Weight [kg]: 0.4
• Tootja: DAYCO PASKI

• Piduriseade: sõidukitele ilma pidurijõu regulaatorita
• Fitting Position: Rear Axle
• Diameter [mm]: 180
• Width [mm]: 30
• Brake Lining: with lining
• Lisainfo: Brake shoe set, without E-mark, 180x30 mm

• Outer Diameter [mm]: 72
• Width [mm]: 24
• SVHC: No SVHC present!
• Tootja: INA
• Nimetus: LU 531006310

• Installatsiooni pool: Tagasild
• Kogus pakendis: 4
• Width [mm]: 40
• Brake System: VAG
• Supplementary Article/Info 2: with handbrake lever
• Inner brake drum diameter [mm]: 200
• Tootja: BREMBO
• Nimetus: BR S 85 508

• Kogus pakendis: 4
• Fitting Position: Front Axle
• Thickness [mm]: 19.5
• Width [mm]: 104.4
• Height [mm]: 66.5
• Brake System: TRW
• Weight [kg]: 1.14
• Tootja: TOMEX

• Installatsiooni pool: Tagasild
• mudeli koodi jaoks: GLE, GTE, Sport
• Kogus pakendis: 4
• Brake System: V.A.G.
• Inner brake drum diameter [mm]: 200
• Width [mm]: 40
• Nimetus: DE LS1625
• Tootja: DELPHI

• Width [mm]: 18
• Number of Teeth: 121
• Belts: with trapezoidal tooth profile
• Weight [kg]: 1.2
• Units/Pulleys: incl. tensioner pulley
• for OE number: 051 198 119
• Observe service information:
• Nimetus: SW 30 02 0040
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of belts: 1
• Pulleys contained: 1
• Number of Teeth: 121
• Width [mm]: 18
• Tension pulley diameter [mm]: 83
• for components see parts list:
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: Tagasild
• Inner brake drum diameter [mm]: 180
• Width [mm]: 31
• Brake Lining: with lining
• Tootja: BOSCH

• Installatsiooni pool: Tagasild
• Inner brake drum diameter [mm]: 200
• Width [mm]: 40
• Weight [kg]: 1.45
• Brake System: VAG
• Installation Information: Important: Observe Fitting Instructions
• Tootja: ABS

• Plokieraldus:
• Kerenumber (VIN) kuni: ******81*H*299000
• Width [mm]: 40
• Outer Diameter [mm]: 200
• Test Mark: ECE R90 Approved
• Material: Sheet Steel
• Brake Lining: with lining
• Fitting Position: Rear Axle
• Weight [kg]: 1.55
• Tootja: FEBI HAMULCE

Piduriseade: tugevdatud piduriga sõidukile, sõidukitele koos pidurijõuregulaatoriga General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Tagasild
• Inner brake drum diameter [mm]: 200
• Width [mm]: 40
• Brake Lining: with lining
• Brake Size: 200x400
• Tootja: BOSCH

• Kütusesüsteemi seadmed: Bensiini sissepritse
• Filter type: Spin-on Filter
• Height [mm]: 172
• Outer Diameter [mm]: 81
• Entry Thread Size: M14x1.5
• Exit Thread Size: M14x1.5
• SVHC: No SVHC present!
• Tootja: FILTRON

• Number of Teeth: 121
• Length [mm]: 1,153
• Width [mm]: 18
• Tooth Pitch [mm]: 9.525
• Number of track rollers: 1
• Tootja: BOSCH
• Nimetus: BS 1987946321

• Vedavad seadmed: Nukkvõll
• Sõiduki varustusvariant: KTB
• Hammastehulk: 121
• Laius (mm): 18
• Pikkus (mm): 1 153
• Rihmade arv: 1
• sisaldab rulle: 1
• Weight [kg]: 0.6
• Nimetus: DA KTB265
• Tootja: DAYCO

• Belt Width [mm]: 18
• Colour: black
• Number of Teeth: 121
• Belts: with trapezoidal tooth profile
• Nimetus: SK VKMA01000
• Tootja: SKF

• Number of Teeth 1: 121
• Width 1 [mm]: 18
• Observe service information:
• SVHC: No SVHC present!
• Tootja: INA
• Nimetus: LU 530016210

• Vedavad seadmed: Nukkvõll
• Soovitatava eritööriista tootenumber: GAT4740
• Article number of the recommended special tool: STT-1
• Tootja: GATES

• Number of track rollers: 1
• Number of belts: 1
• Width 1 [mm]: 18
• Number of Teeth: 121
• Tootja: SNR

• Vedavad seadmed: Nukkvõll
• Packaging length [cm]: 26.5
• Packaging width [cm]: 16.5
• Packaging height [cm]: 7
• Weight [kg]: 0.64
• Number of Teeth: 121
• Width [mm]: 18
• contains more articles than the OE kit (art. no.): 056 198 119
• Tootja: CONTITECH

• Installatsiooni pool: Esisild
• Kogus pakendis: 4
• Manufacturer Restriction: TRW
• Width [mm]: 119.3
• Height [mm]: 69.6
• Thickness [mm]: 19.4
• Wear Warning Contact: not prepared for wear warning indicator
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with brake caliper screws
• Test Mark: E1 90R 01024/059
• Tootja: LUCAS

SVHC: No information available, please contact the manufacturer!

• Width [mm]: 18
• Housing Type: without housing
• Number of Teeth: 121
• Surface: PTFE (Polytetrafluorethylene) coated
• Belts: with trapezoidal tooth profile
• Weight [kg]: 1.99
• for OE number: 051 198 119 S2
• Tootja: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of Teeth: 121
• Width [mm]: 18
• Number of belts: 1
• Weight [kg]: 0.56
• Tootja: DOLZ

• Installatsiooni pool: Esisild
• Kogus pakendis: 4
• Brake System: TRW
• Supplementary Article/Supplementary Info: with accessories
• Width [mm]: 119
• Height [mm]: 70
• Height 1 [mm]: 70
• Thickness [mm]: 19.4
• WVA Number: 20168
• Test Mark: R90 Homologated
• Wear Warning Contact: not prepared for wear warning indicator
• Weight [kg]: 1.52
• Packing Type: Carton
• Packaging length [cm]: 16.8
• Packaging width [cm]: 12.7
• Packaging height [cm]: 4.7
• Tootja: JURID

• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Width [mm]: 31
• Brake System: VAG
• Inner brake drum diameter [mm]: 180
• Mounting Type: Pre-assembled
• Adjustment: with manual adjustment
• Bore Diameter [mm]: 14
• Tootja: BREMBO

• Piston Diameter [mm]: 17.5
• Width [mm]: 31
• Outer Diameter [mm]: 180
• Test Mark: ECE R90 Approved
• Mounting Type: Pre-assembled
• Fitting Position: Rear Axle
• Weight [kg]: 1.65
• Tootja: FEBI HAMULCE

Supplementary Article/Supplementary Info: with wheel brake cylinder, with accessories, with fastening/mounting material General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Width [mm]: 18
• Housing Type: with housing
• Number of Teeth: 121
• Surface: PTFE (Polytetrafluorethylene) coated
• Belts: with trapezoidal tooth profile
• Weight [kg]: 2.77
• for OE number: 051 198 119 S3
• Tootja: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Piston Diameter [mm]: 17.5
• Width [mm]: 40
• Outer Diameter [mm]: 200
• Test Mark: ECE R90 Approved
• Mounting Type: Pre-assembled
• Fitting Position: Rear Axle
• Weight [kg]: 1.65
• Tootja: FEBI BILSTEIN

Supplementary Article/Supplementary Info: with wheel brake cylinder, with accessories, with fastening/mounting material General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Tagasild
• Mounting Type: Pre-assembled
• Adjustment: with automatic adjustment
• Supplementary Article/Supplementary Info: with accessories, with wheel brake cylinder
• Brake Lining: with lining
• Inner brake drum diameter [mm]: 180
• Width [mm]: 30
• Piston Diameter [mm]: 14.3
• Tootja: BOSCH HAMULCE

• Number of Teeth 1: 121
• Width 2 [mm]: 18
• Observe service information:
• SVHC: No SVHC present!
• Tootja: INA

• Outer Diameter [mm]: 72
• Width [mm]: 24
• Material: Metal