Tootekategooriad
Filtrid Pidurid vedrustus/alusvanker Roolisüsteem Jahutus/kliima Elektrisüsteem Veokonks/lisad Jõuülekanne Väljalaskesüsteem Kere Süüte-/eelsüütesüsteem Mootor Klaasid/klaasipuhastus Valgustus Kütus Kabiinivarustus HooldusToode
Kirjeldus
Laoseis
Hind
(km-ga)
-
Kerenumber (VIN) alates: 8D-
X- 200 001 - PR-numbri jaoks: 1BV
- Šassii: sportvedrustusega sõidukile
-
Installatsiooni pool: üleval,
taga, esisild vasakul, esisild paremal - Roolimisliik: õõtshoova jaoks
- Nimetus: Control arm bush left=right
- Kvaliteediklass: PJ
Lisainfo: "Tootja: SRL
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"
-
Installatsiooni pool: sees,
Esisild, all, ees - Control/Trailing Arm Type: Control Arm
-
Mounting Type: Rubber-
Metal Mount -
Lisainfo: AUDI A4 AVANT /
QUATTRO
- Quantity per axle: 2
- Control/Trailing Arm Type: for control arm
-
Fitting Position: Front Axle,
Lower, Front, inner, both sides - Article number of recommended accessories: 39430 01
- Observe service information:
- Tootja: LEMFORDER
- Nimetus: LMI 1454101
-
Kerenumber (VIN) alates: 8D-
X- 200 001 - mitte PR-numbrile: 1BV
- Šassii: ilma sportvedrustuseta sõidukitele
-
Lisainfo: Bolts,
nuts and washer for JP item no. 1140100210
-
Fitting Position: Front Axle Left,
Front Axle Right, inner -
Mounting Type: Rubber-
Metal Mount -
Tootja: JP-
GROUP -
Lisainfo: Rubber mount for wishbone,
front, rear
- Šassii: ilma sportvedrustuseta sõidukitele
-
Fitting Position: Upper Front Axle,
inner - Tootja: JP GROUP
-
Lisainfo: Rubber mount for wishbone,
front
-
Installatsiooni pool: Esisild,
all -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 40
- Tootja: DELLO AUTOMEGA
-
Installatsiooni pool: Esisild,
üleval -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 46
- Tootja: DELLO AUTOMEGA
-
Kerenumber (VIN) alates: 8D-
W- 260130 -
PR-numbri jaoks: 1BA,
1BB, 1BC, 1BE, 1BP, 1BQ, 1BT -
Fitting Position: Front Axle Left,
Front Axle Right, Upper, inner - Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 4
- Axle alignment required after fitting:
- Tootja: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Installatsiooni pool: Esisild,
üleval -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 46
- Width [mm]: 40
- SVHC: No SVHC present!
- Tootja: FAG
- Nimetus: LU 829009410
- Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 2
- Outer Diameter [mm]: 50
- Inner Diameter [mm]: 12
- Width [mm]: 31
- Tootja: TOPRAN
Fitting Position: Front Axle Left, Front Axle Right, Lower, Front, inner General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Kogus pakendis: 5
- Control/Trailing Arm Type: Control Arm
- Axle alignment required after fitting:
-
Fitting Position: inner,
Upper, Front Axle -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.118
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Installatsiooni pool: all,
ees, esisild vasakul, esisild paremal -
Materjal: Kumm/
metall - Jämedus/Tugevus (mm): 49
- Siseläbimõõt [mm]: 12
-
Välisläbimõõt [mm]: 40,
24 - Nimetus: Control arm bush left=right
- Kvaliteediklass: PJ
Lisainfo: "Tootja: SRL
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
- Installatsiooni pool: esisild mõlemapoolselt
- Üldine informatsioon: control arm bush
- Tootja: VIKA
- Šassii: sportvedrustusega sõidukile
- Ehitusaasta alates: 02.1999
- PR-numbri jaoks: 1BV
-
Fitting Position: Front Axle Left,
Front Axle Right, Upper, inner - Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 4
- Outer Diameter [mm]: 46
- Inner Diameter [mm]: 10
- Width [mm]: 26
- Axle alignment required after fitting:
- Tootja: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Lower Front Axle,
Front, outer - Tootja: JP GROUP
-
Lisainfo: Rubber mount for wishbone,
front, outer
-
Kerenumber (VIN) kuni: 8D-
W- 260 129 -
Installatsiooni pool: üleval,
esisild vasakul, esisild paremal -
Materjal: Kumm/
metall - Jämedus/Tugevus (mm): 40
- Siseläbimõõt [mm]: 10
-
Välisläbimõõt [mm]: 47,
23 - Nimetus: Control arm bush left=right
- Kvaliteediklass: PJ
Lisainfo: "Tootja: SRL
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
- Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 2
- Outer Diameter [mm]: 40
- Inner Diameter [mm]: 12
- Width [mm]: 42
- Axle alignment required after fitting:
- Tootja: TOPRAN
Fitting Position: Front Axle Left, Front Axle Right, Lower, Front, outer General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Installatsiooni pool: Pealis
-
Laagritüüp: Kummi-
metalllaager - Nimetus: Control arm bush left=right
- Kvaliteediklass: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle,
Front, Lower - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 40
- for OE number: 4D0407181H
- paired article number: 9001539
- Tootja: SASIC
- Weight [kg]: 0.1
- Required quantity: 2
-
Fitting Position: Front Axle,
both sides, Lower, Front, outer - Control/Trailing Arm Type: for control arm
- Outer Diameter [mm]: 40.3
- Inner Diameter [mm]: 12
- Tootja: TEDGUM
Lisainfo: Rubber mount for wishbone, front
-
Kerenumber (VIN) kuni: 8D-
W- 260 129 -
Installatsiooni pool: üleval,
sees, paremal, vasakul - Fitting Position: Front Axle
- Outer Diameter [mm]: 46.5
- Inner Diameter [mm]: 10.2
- Weight [kg]: 0.07
- Nimetus: COC 21652949
- Tootja: CORTECO
-
Installatsiooni pool: Esisild,
all -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 40
- Width [mm]: 50
- SVHC: No SVHC present!
- Tootja: FAG
-
Fitting Position: Front Axle,
Rear, Upper - Inner Diameter [mm]: 10
- Outer Diameter [mm]: 46.5
- for OE number: 4D0407515C
- Tootja: SASIC
-
Fitting Position: Front Axle,
Front, outer, Right, Left - Outer Diameter [mm]: 40.3
- Inner Diameter [mm]: 12.1
- Weight [kg]: 0.09
- Nimetus: COC 21652796
- Tootja: CORTECO
-
Installatsiooni pool: Esisild,
kese -
Laagritüüp: Kummi-
metalllaager - Roolimisliik: õõtshoova jaoks
-
Kaal (kg): 0,
11 -
Nimetus: DY 37-
06046- 6 - Tootja: DYS
-
Installatsiooni pool: Esisild,
taga, üleval - Inner Diameter 1 [mm]: 10
- Outer Diameter 1 [mm]: 47
- Thickness 1 [mm]: 40
- Tootja: DELPHI
- Nimetus: DE TD437W
- Kerenumber (VIN) kuni: ******8D*W*260129
- Thickness [mm]: 40
- Inner Diameter [mm]: 10
-
Outer Diameter [mm]: 47,
23 -
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Upper, Front Axle Right - Weight [kg]: 0.078
- Tootja: FEBI BILSTEIN
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Installatsiooni pool: Esisild,
ees, esisild alla, väljas - Hulk: 2
-
Kerenumber (VIN) alates: 8D-
W- 006 471 -
Kaal (kg): 0,
095 -
Materjal: Kumm/
metall - Jämedus/Tugevus (mm): 49
- vajaminev tükihulk: 2
- Siseläbimõõt [mm]: 12
-
Välisläbimõõt [mm]: 40,
24 - Üldine informatsioon: control arm bush
- Tootja: VIKA
- Kerenumber (VIN) alates: ******8D*X*200001
- Šassii: madaldatud vedrustusega sõidukile
- PR-numbri jaoks: 1BV
- Thickness [mm]: 40
- Inner Diameter [mm]: 10
-
Outer Diameter [mm]: 46,
47 -
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Upper, Front Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.09
- Tootja: FEBI BILSTEIN
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: inner,
Upper, Front Axle -
Material: Rubber/
Metal - Weight [g]: 81
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 46
- Length [mm]: 40
- Nimetus: IM 1718
- Tootja: ORIGINAL IMPERIUM
-
Installatsiooni pool: üleval,
Esisild - Tootja: GSP
- Kerenumber (VIN) kuni: ******8D*W*260129
- Thickness [mm]: 40
- Inner Diameter [mm]: 10
-
Outer Diameter [mm]: 46,
23 -
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Upper, Front Axle Right - Weight [kg]: 0.075
- Nimetus: SW 30 60 0029
- Tootja: SWAG
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
-
Fitting Position: Front Axle,
Upper, both sides, Front, Rear, inner - Length [mm]: 40
- Inner Diameter [mm]: 10.1
- Outer Diameter [mm]: 46.4
- Quantity per axle: 4
- Tootja: TRW
SVHC: No information available, please contact the manufacturer!
-
Installatsiooni pool: Esisild,
väljas, all - Inner Diameter 1 [mm]: 12
- Outer Diameter 1 [mm]: 40
- Thickness 1 [mm]: 50
- Nimetus: DE TD441W
- Tootja: DELPHI
-
Installatsiooni pool: esisild mõlemapoolselt,
üleval -
Siseläbimõõt [mm]: 10,
2 - Välisläbimõõt [mm]: 46
- Kõrgus (mm): 40
- Nimetus: ALT 80928AL
- Tootja: ALTE AUTOMOTIVE
- Installatsiooni pool: esisild alla
-
Seerianumber: ZTP-
AU- 005A - Tootja: NTY
-
Kerenumber (VIN) alates: 8D-
X- 200 001 - Šassii: madaldatud vedrustusega sõidukile
- Thickness [mm]: 40
-
Mounting Type: Rubber-
Metal Mount - Outer Diameter 1 [mm]: 46
- Outer Diameter 2 [mm]: 47
- Inner Diameter 1 [mm]: 10
- Tootja: BGA
Fitting Position: Front Axle Left, Upper Front Axle, Front Axle Right
- Kerenumber (VIN) alates: ******8D*X*200001
- Šassii: madaldatud vedrustusega sõidukile
- PR-numbri jaoks: 1BV
- Thickness [mm]: 40
- Inner Diameter [mm]: 10
-
Outer Diameter [mm]: 46,
47 -
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Upper, Front Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.09
- Nimetus: SW 32 93 0696
- Tootja: SWAG
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Installatsiooni pool: Esisild,
all, ees, väljas - Siseläbimõõt [mm]: 12
- Välisläbimõõt [mm]: 40
- Kõrgus (mm): 50
- Nimetus: ALT 80989AL
- Tootja: ALTE AUTOMOTIVE
-
Installatsiooni pool: esisild vasakul,
esisild paremal, all, väljas - for OE number: 4D0 407 181 F
- Tootja: GSP ZAWIESZENIE
-
Installatsiooni pool: Esisild,
all -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 50
- Width 1 [mm]: 32
- Width 2 [mm]: 60
- SVHC: No SVHC present!
- Tootja: FAG
- Nimetus: LU 829009710
-
Installatsiooni pool: Esisild,
all - Mounting Type: Rubber Mount
- Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 50
- Tootja: DELLO AUTOMEGA
- Thickness [mm]: 49
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 40,
24 -
Material: Rubber/
Metal - Weight [kg]: 0.095
- Observe service information:
- Tootja: FEBI BILSTEIN
Fitting Position: Front Axle Left, Lower, Front, outer, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Installatsiooni pool: all,
ees, esisild vasakul, esisild paremal -
Materjal: Kumm/
metall - pikkus [mm]: 60
- Siseläbimõõt [mm]: 12
- Välisläbimõõt [mm]: 50
- Nimetus: Control arm bush left=right
- Kvaliteediklass: PJ
Lisainfo: "Tootja: SRL
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
- Šassii: ilma sportvedrustuseta sõidukitele
-
Installatsiooni pool: esisild mõlemapoolselt,
üleval, sees -
Laagritüüp: Kummi-
metalllaager - Roolimisliik: õõtshoova jaoks
-
Välisläbimõõt [mm]: 46,
4 - Siseläbimõõt [mm]: 10
-
Kaal (kg): 0,
086 - Pikkus (mm): 40
- Tootja: RTS
-
Fitting Position: Front Axle Left,
Front Axle Right, Lower, inner - Tootja: JP GROUP
-
Lisainfo: Rubber mount for wishbone,
front, inner
- Length [mm]: 60
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 50
-
Material: Rubber/
Metal - Weight [kg]: 0.202
- Observe service information:
- Tootja: FEBI BILSTEIN
Fitting Position: Front Axle Left, Lower, Front, inner, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Kogus pakendis: 2
- Installatsiooni pool: Esisild
-
Kaal (kg): 0,
08 - Kõrgus 1 (mm): 26
-
Kõrgus 2 (mm): 39,
8 - Siseläbimõõt [mm]: 10
-
Välisläbimõõt [mm]: 46,
4 - Roolimisliik: Õõtshoob
- Kaal (g): 80
- Tootja: METALCAUCHO
- Outer Diameter 1 [mm]: 40
- Inner Diameter 1 [mm]: 12
- Thickness 1 [mm]: 50
- Tootja: BGA
Fitting Position: outer, Lower, Front, Front Axle Left, Front Axle Right
-
Fitting Position: Front Axle,
Rear, Lower - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 50
- for OE number: 4D0407182G
- Tootja: SASIC
-
Fitting Position: Front Axle,
Front, inner, Right, Left - Outer Diameter [mm]: 50.2
- Inner Diameter [mm]: 12.2
- Weight [kg]: 0.2
- Nimetus: COC 21652815
- Tootja: CORTECO
- Thickness [mm]: 49
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 40,
24 -
Material: Rubber/
Metal - Weight [kg]: 0.092
- Observe service information:
- Nimetus: SW 32 69 0003
- Tootja: SWAG
Fitting Position: Front Axle Left, Lower, Front, outer, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Installatsiooni pool: Esisild,
sees, all - Inner Diameter 1 [mm]: 12
- Outer Diameter 1 [mm]: 50
- Thickness 1 [mm]: 60
- Tootja: DELPHI
- Nimetus: DE TD440W
-
Installatsiooni pool: Esisild,
sees, esisild peal - Hulk: 4
-
Kerenumber (VIN) alates: 8D-
W- 260 130 -
Kerenumber (VIN) kuni: 8D-
W- 260 129 -
Kaal (kg): 0,
078 -
Materjal: Kumm/
metall - Jämedus/Tugevus (mm): 40
- Siseläbimõõt [mm]: 10
-
Välisläbimõõt [mm]: 47,
23 - Üldine informatsioon: control arm bush
- Tootja: VIKA
- Length [mm]: 60
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 50
-
Material: Rubber/
Metal - Weight [kg]: 0.202
- Observe service information:
- Nimetus: SW 30 60 0031
- Tootja: SWAG
Fitting Position: Front Axle Left, Lower, Front, inner, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Installatsiooni pool: ees,
esisild mõlemapoolselt, all, väljas - vajaminev tükihulk: 2
- paired article number: VKDS 331012
- Height [mm]: 50
- Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 40.2
- Nimetus: SK VKDS331012
- Tootja: SKF
- Kogus pakendis: 2
- Installatsiooni pool: Esisild
-
Kaal (kg): 0,
1 - Kõrgus 1 (mm): 42
-
Kõrgus 2 (mm): 49,
8 - Siseläbimõõt [mm]: 12
-
Välisläbimõõt [mm]: 40,
5 - Roolimisliik: Õõtshoob
-
Laagritüüp: Kummi-
metalllaager - Kaal (g): 100
- Tootja: METALCAUCHO
-
Kerenumber (VIN) kuni: 8D-
W- 260 129 -
Installatsiooni pool: taga,
sees, üleval, ees, esisild mõlemapoolselt - vajaminev tükihulk: 4
- paired article number: VKDS 331021
- Nimetus: SK VKDS331021
- Tootja: SKF
-
Installatsiooni pool: esisild mõlemapoolselt,
üleval, sees -
Laagritüüp: Kummi-
metalllaager - Roolimisliik: õõtshoova jaoks
-
Välisläbimõõt [mm]: 46,
4 - Siseläbimõõt [mm]: 10
- Pikkus (mm): 40
-
Kaal (kg): 0,
088 - Tootja: RTS
-
Installatsiooni pool: Esisild,
sees, ees, esisild mõlemapoolselt, all - Hulk: 2
-
Kerenumber (VIN) alates: 8D-
W- 006 471 -
Kaal (kg): 0,
202 - Pikkus (mm): 60
-
Materjal: Kumm/
metall - vajaminev tükihulk: 2
- Siseläbimõõt [mm]: 12
- Välisläbimõõt [mm]: 50
- Üldine informatsioon: control arm bush
- Tootja: VIKA
- Installatsiooni pool: Pealis
-
Laagritüüp: Kummi-
metalllaager - Nimetus: Control arm bush left=right
- Kvaliteediklass: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
-
Installatsiooni pool: Esisild,
all, ees, sees - Siseläbimõõt [mm]: 12
- Välisläbimõõt [mm]: 24
- Kõrgus (mm): 60
- Nimetus: ALT 80990AL
- Tootja: ALTE AUTOMOTIVE
-
Fitting Position: Lower,
inner, Front -
Material: Rubber/
Metal - Outer Diameter [mm]: 50
- Tootja: KAMOKA
-
Installatsiooni pool: Esisild,
väljas -
Laagritüüp: Kummi-
metalllaager - Roolimisliik: õõtshoova jaoks
-
Kaal (kg): 0,
22 -
Nimetus: DY 37-
06046- 5 - Tootja: DYS
-
Laagritüüp: Kummi-
metalllaager - Roolimisliik: õõtshoova jaoks
-
Installatsiooni pool: esisild mõlemapoolselt,
all, sees, ees -
Välisläbimõõt [mm]: 50,
3 -
Siseläbimõõt [mm]: 12,
2 - Pikkus (mm): 60
-
Kaal (kg): 0,
202 - Tootja: RTS
-
Installatsiooni pool: esisild vasakul,
esisild paremal, all, väljas - for OE number: 4D0 407 182 E
- Tootja: GSP
- Installatsiooni pool: Pealis
-
Laagritüüp: Kummi-
metalllaager - Nimetus: Control arm bush left=right
- Kvaliteediklass: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
-
Installatsiooni pool: silla ees,
esisild vasakul, esisild paremal, all -
Piduri-/sõidudünaamika: Sõidukitele koos ABS-
ga - Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 50.4
- Length [mm]: 60
- paired article number: 270327
- Weight [kg]: 0.21
-
Installation Information: Important:
Observe Fitting Instructions - Tootja: A.B.S.
- PR-numbri jaoks: 1BV
-
Kerenumber (VIN) alates: 8D-
X- 200 001 - Šassii: sportvedrustusega sõidukile
-
Fitting Position: Front Axle,
Upper, both sides, Front, Rear - Control/Trailing Arm Type: for control arm
- Quantity per axle: 4
- Tootja: LEMFORDER
- Nimetus: LMI 2931801
-
Installatsiooni pool: esisild mõlemapoolselt,
ees, all, sees - vajaminev tükihulk: 2
- paired article number: VKDS 331013
- Height [mm]: 60
- Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 24
- Nimetus: SK VKDS331013
- Tootja: SKF
-
Kerenumber (VIN) alates: 8D-
W- 260 130 -
Fitting Position: Front Axle,
Upper, both sides, Front, Rear - Quantity per axle: 4
- Nimetus: LMI 2590901
- Tootja: LEMFÃRDER
-
Installatsiooni pool: Esisild,
sees - Telg: 1.Es
-
Fitting Position: both sides,
Upper, Front Axle - Height [mm]: 40
- Weight [kg]: 0.102
- Required quantity: 4
- Inner Diameter [mm]: 10.1
- Outer Diameter [mm]: 46.3
- Control/Trailing Arm Type: Control Arm
-
Mounting Type: Rubber-
Metal Mount - Packaging length [cm]: 11
- Packaging width [cm]: 6
- Packaging height [cm]: 6
- Tootja: MONROE
- Installatsiooni pool: Pealis
-
Laagritüüp: Kummi-
metalllaager - Nimetus: Control arm bush left=right
- Kvaliteediklass: PJ
Lisainfo: "Tootja: TEKNOROT
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"
-
Installatsiooni pool: Esisild,
all -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65
- Tootja: DELLO AUTOMEGA
-
Fitting Position: Front Axle Left,
Front Axle Right, Rear, inner - Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 2
- Outer Diameter [mm]: 65
- Inner Diameter [mm]: 12
- Width [mm]: 65
- Axle alignment required after fitting:
- old version:
- Tootja: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Kerenumber (VIN) kuni: 8D-
W- 260 129 - Control/Trailing Arm Type: for control arm
-
Fitting Position: Front Axle,
Upper, both sides, Front, Rear - Quantity per axle: 4
- Tootja: LEMFORDER
-
Installatsiooni pool: esisild vasakul,
esisild paremal, all, sees - Tootja: GSP
- Installatsiooni pool: Esisild
- OE-numbri jaoks: 8K0 407 515
- Kaal (g): 87
- Garantii: 3 aastat garantii
- Pikkus (mm): 46
- Laius (mm): 90
- Tootja: AT AUTOTEILE GERMANY
Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
-
Fitting Position: Front Axle,
Lower, Front, outer, both sides - Control/Trailing Arm Type: for control arm
- Quantity per axle: 2
- Tootja: LEMFÖRDER
-
Kerenumber (VIN) kuni: 8D-
W- 104 628 - Mootorikood: AFB
-
Installatsiooni pool: all,
taga, esisild vasakul, esisild paremal - OE-numbri jaoks: 4D0 407 183 P
-
Materjal: Kumm/
metall - Jämedus/Tugevus (mm): 80
- Siseläbimõõt [mm]: 12
- Välisläbimõõt [mm]: 64
- Nimetus: Control arm bush left=right
- Kvaliteediklass: PJ
Lisainfo: "Tootja: SRL
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
-
Installatsiooni pool: sees,
esisild alla - Tootja: GSP
- Installatsiooni pool: Pealis
-
Laagritüüp: Kummi-
metalllaager - Nimetus: Control arm bush left=right
- Kvaliteediklass: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
- Weight [kg]: 0.56
- Outer Diameter [mm]: 64.9
-
Fitting Position: Rear,
inner, Lower Front Axle, both sides - Required quantity: 2
- Inner Diameter [mm]: 12
- Tootja: TEDGUM
- Nimetus: TG 00729773
- Installatsiooni pool: Pealis
-
Laagritüüp: Kummi-
metalllaager - Nimetus: Control arm bush left=right
- Kvaliteediklass: PJ
Lisainfo: "Tootja: TEKNOROT
A.A8 03-/VW PHEATON
(kvaliteediklass: PJ)"
-
Installatsiooni pool: Esisild,
taga, all - Inner Diameter 1 [mm]: 12
- Outer Diameter 1 [mm]: 65
- Thickness 1 [mm]: 80
- Tootja: DELPHI ZAWIESZENIE
- OE-numbri jaoks: KIT 02
- Installatsiooni pool: esisild mõlemapoolselt
- Garantii: 3 aastat garantii
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
-
Kaal (kg): 1,
6 - Roolimisliik: Õõtshoob
- Tootja: SKV GERMANY
-
Installatsiooni pool: silla taga,
esisild vasakul, esisild paremal, all - Inner Diameter [mm]: 12.1
- Outer Diameter [mm]: 64
- Length [mm]: 80
- paired article number: 270437
- Weight [kg]: 0.51
-
Installation Information: Important:
Observe Fitting Instructions - Tootja: A.B.S.
-
Fitting Position: Rear,
Lower, Front Axle Left, Front Axle Right - Thickness [mm]: 80
- Outer Diameter 1 [mm]: 64
- Inner Diameter 1 [mm]: 12
- Tootja: BGA
- Installatsiooni pool: Pealis
-
Laagritüüp: Kummi-
metalllaager - Nimetus: Control arm bush left=right
- Kvaliteediklass: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
- Ehitusaasta alates: 11.1997
- Ehitusaasta kuni: 10.2000
- Quality: OE Performance
- Fitting Position: Front
- Colour: silver
- Weight [g]: 483
- Tootja: GATES
- Installatsiooni pool: Esisild
-
Laagritüüp: Kummi-
metalllaager - Roolimisliik: õõtshoova jaoks
-
Kaal (kg): 0,
52 -
Nimetus: DY 37-
06044- 5 - Tootja: DYS
-
Fitting Position: Front Axle,
Rear, inner, Right, Left - Total Length [mm]: 80
- Outer Diameter [mm]: 65
- Inner Diameter [mm]: 12.2
- Weight [kg]: 0.53
- Nimetus: COC 21652814
- Tootja: CORTECO
-
Installatsiooni pool: taga,
sees, all, esisild mõlemapoolselt - vajaminev tükihulk: 2
- paired article number: VKDS 331014
- Height [mm]: 80
- Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 64.9
- Nimetus: SK VKDS331014
- Tootja: SKF
-
Installatsiooni pool: esisild paremal,
all, taga - Siseläbimõõt [mm]: 12
- Välisläbimõõt [mm]: 65
- Kõrgus (mm): 80
- Nimetus: ALT 80927AL
- Tootja: ALTE AUTOMOTIVE
-
Fitting Position: Rear,
inner, Lower, Front Axle -
Material: Rubber/
Metal - Mounting Type: Hydro Mount
- Weight [g]: 455
- new version:
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65
- Length [mm]: 65
- Overall Length [mm]: 80
- Nimetus: IM 1314
- Tootja: ORIGINAL IMPERIUM
- Installatsiooni pool: Esisild
-
Kaal (kg): 0,
55 - Kõrgus 1 (mm): 65
-
Kõrgus 2 (mm): 80,
2 - Siseläbimõõt [mm]: 12
-
Välisläbimõõt [mm]: 64,
6 - Roolimisliik: Õõtshoob
-
Laagritüüp: Kummi-
metalllaager - Kaal (g): 550
- Tootja: METALCAUCHO
-
Installatsiooni pool: Esisild,
sees - Telg: 1.Ts
-
Fitting Position: both sides,
Rear, Lower, Front Axle - Height [mm]: 80
- Weight [kg]: 0.6
- Required quantity: 2
- Inner Diameter [mm]: 12.1
- Outer Diameter [mm]: 65
- Control/Trailing Arm Type: Control Arm
- Mounting Type: Hydro Mount
- Packaging length [cm]: 13.5
- Packaging width [cm]: 9.5
- Packaging height [cm]: 7
- Tootja: MONROE
- Mounting Type: Hydro Mount
-
Fitting Position: both sides,
Rear, Lower Front Axle - Control/Trailing Arm Type: Control Arm
- Axle alignment required after fitting:
- Weight [kg]: 0.508
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Kerenumber (VIN) alates: 8D-
V- 152088 - Installatsiooni pool: Esisild
- Garantii: 3 aastat garantii
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
-
Kaal (kg): 1,
57 - Tootja: SKV GERMANY
-
Installatsiooni pool: Esisild,
taga, sees, esisild alla - Hulk: 2
-
Kerenumber (VIN) alates: 8D-
W- 006 471 -
Kaal (kg): 0,
486 -
Materjal: Kumm/
metall - Jämedus/Tugevus (mm): 80
- vajaminev tükihulk: 2
- Siseläbimõõt [mm]: 12
- Välisläbimõõt [mm]: 64
- Üldine informatsioon: control arm bush
- Tootja: VIKA
-
Kaal (kg): 0,
324 -
Installatsiooni pool: Tagasild mõlemapoolselt,
all, väljas -
Laagritüüp: Kummi-
metalllaager - Roolimisliik: õõtshoova jaoks
-
Siseläbimõõt [mm]: 12,
2 -
Välisläbimõõt [mm]: 55,
8 - Pikkus (mm): 101
- Tootja: RTS
-
Installatsiooni pool: Esisild,
all -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65
- Width [mm]: 80
- SVHC: No SVHC present!
- Tootja: FAG
- Nimetus: LU 829009610
- Ehitusaasta alates: 11.1997
- Ehitusaasta kuni: 10.2000
- Quality: OE Performance
- Fitting Position: Front
- Colour: silver
- Weight [g]: 773
- Tootja: GATES
- Mootorikood: AFB
- Kerenumber (VIN) kuni: ******8D*W*104628
- old version:
- Thickness [mm]: 80
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 64
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Lower, Rear, Front Axle Right - Weight [kg]: 0.521
- for OE number: 4D0 407 183 P
- Observe service information:
- Tootja: FEBI BILSTEIN
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- new version:
- Thickness [mm]: 80
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 64
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Lower, Rear, Front Axle Right - Weight [kg]: 0.486
- for OE number: 4D0 407 183 AC
- Observe service information:
- Tootja: FEBI BILSTEIN
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Mootorikood: AFB
- Kerenumber (VIN) kuni: ******8D*W*104628
- old version:
- Thickness [mm]: 80
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 64
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Lower, Rear, Front Axle Right - Weight [kg]: 0.483
- Observe service information:
- Nimetus: SW 30 60 0016
- Tootja: SWAG
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- new version:
- Thickness [mm]: 80
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Lower, Rear, Front Axle Right - Weight [kg]: 0.484
- Observe service information:
- Nimetus: SW 30 60 0041
- Tootja: SWAG
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Mounting Type: Hydro Mount
-
Fitting Position: Front Axle,
Lower, both sides, Rear - Length [mm]: 80
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65
- Quantity per axle: 2
- Tootja: TRW
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front Axle,
Lower, both sides, Rear - Mounting Type: Hydro Mount
- Control/Trailing Arm Type: for control arm
- Outer Diameter [mm]: 65
- Inner Diameter [mm]: 12
- Width [mm]: 80
- Quantity per axle: 2
- Nimetus: LMI 1765901
- Tootja: LEMFÃRDER
- Installatsiooni pool: Esisild
- Üldine informatsioon: Bush kit for control arm; 12 pcs
- Tootja: VIKA
Laki Auto universaaltooted
TecDoc sõidukite kataloog
TecDoc veokite kataloog