• Ehitusaasta alates: 01.1999
• Kerenumber (VIN) alates: 8DX200001
• Kaablipikkus (mm): 1 025
• Installatsiooni pool: esisild vasakul, esisild paremal
• Seerianumber: HCA-AU-007
• Tootja: NTY
• Nimetus: NTY HCA-AU-007

• Ehitusaasta kuni: 12.1999
• Fitting Position: Front Axle Left, Front Axle Right
• Sensor Type: Passive sensor
• Length [mm]: 1,100
• Tootja: JP GROUP
• Lisainfo: ABS sensor, front, left/right

• Fitting Position: Rear Axle Left, Rear Axle Right
• Sensor Type: Inductive Sensor
• Tootja: JP GROUP A/S
• Lisainfo: ABS sensor, rear, left/right

• Välisläbimõõt [mm]: 18,8
• Tootja: FAST

Üldine informatsioon: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu

• Length [mm]: 32
• Outer Diameter [mm]: 18.8
• Weight [kg]: 0.005
• Nimetus: FIKSEERIMISHšLSS, RATTAP™™RETE ANDUR
• Tootja: FEB
• Lisainfo: F15340

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Tootja: METZGER

Installatsiooni pool: esisild vasakul, esisild paremal, Tagasild vasakul, Tagasild paremal

• Installatsiooni pool: esisild mõlemapoolselt
• Hammastehulk: 45
• Laius (mm): 11
• Siseläbimõõt [mm]: 77
• Välisläbimõõt [mm]: 81
• Seerianumber: NZA-AU-001
• Tootja: NTY
• Nimetus: NTY NZA-AU-001
• Lisainfo: 45 T 81 MM / 77 MM / 11 MM

• Installatsiooni pool: Esisild
• Width [mm]: 11
• Number of Teeth: 45
• Outer Diameter [mm]: 81
• Inner Diameter [mm]: 77
• Nimetus: ANDUR,ABS
• Tootja: MAX

• Fitting Position: Front Axle both sides
• Width [mm]: 11
• Number of Teeth, ABS ring: 45
• Inner Diameter [mm]: 77
• Outer Diameter [mm]: 80.7
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: Esisild
• Hammastehulk: 45
• Siseläbimõõt [mm]: 77
• Jämedus/Tugevus (mm): 11
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle both sides
• Tootja: DELLO AUTOMEGA
• Lisainfo: 110100510 DELLO

• Installatsiooni pool: Tagasild
• Inner Diameter [mm]: 67
• Width [mm]: 11
• Number of Teeth: 45
• Outer Diameter [mm]: 107
• Nimetus: ANDUR,ABS
• Tootja: MAX
• Lisainfo: 109114015

• Installatsiooni pool: Esisild
• Inner Diameter [mm]: 76.8
• Width [mm]: 11
• Outer Diameter [mm]: 80.7
• Number of Teeth, ABS ring: 45
• Nimetus: ANDUR,ABS
• Tootja: TRI
• Lisainfo: VAG

• Installatsiooni pool: Tagasild
• Inner Diameter [mm]: 67
• Width [mm]: 11
• Outer Diameter [mm]: 106.8
• Number of Teeth, ABS ring: 45
• Nimetus: ANDUR,ABS
• Tootja: TRI
• Lisainfo: AUDI

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Seerianumber: HCA-AU-005
• Tootja: NTY

• Fitting Position: Rear Axle both sides
• Tootja: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Ehitusaasta kuni: 12.1998
• Kaablipikkus (mm): 1 100
• Installatsiooni pool: esisild vasakul, esisild paremal
• Seerianumber: HCA-AU-006
• Tootja: NTY

• Ehitusaasta kuni: 12.1998
• Kerenumber (VIN) kuni: 8D..X..199 999
• for OE number: 8D0 927 803
• Sensor Type: Passive sensor
• Overall Length [mm]: 1,100
• Fitting Position: Front Axle
• Tootja: KAMOKA UK£ADY HAMULCOWE

• Ehitusaasta kuni: 10.2000
• Sensor Type: Passive sensor
• Overall Length [mm]: 975
• Fitting Position: Rear Axle
• Tootja: KAMOKA UK£ADY HAMULCOWE

• Ehitusaasta alates: 01.1999
• Installatsiooni pool: Esisild
• Kaablipikkus (mm): 1 025
• Pistikkontaktide arv: 2
• Anduritüüp: Induktiivandur
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Tootja: ABAKUS LORO
• Nimetus: AB 120-02-039

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: Esisild
• Kaablipikkus (mm): 1 020
• Pistikkontaktide arv: 2
• Anduritüüp: Induktiivandur
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Tootja: ABAKUS LORO
• Nimetus: AB 120-02-122

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: Tagasild
• Kaablipikkus (mm): 963
• Pistikkontaktide arv: 2
• Anduritüüp: Induktiivandur
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Tootja: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Ehitusaasta alates: 01.1999
• Kerenumber (VIN) alates: 8DX200001
• Installatsiooni pool: esisild vasakul, esisild paremal
• Seerianumber: HCA-AU-008
• Veljesuurus (toll): 18,0
• Tootja: NTY

• Installatsiooni pool: Tagasild
• Tootja: DELLO AUTOMEGA

• Inner Diameter [mm]: 66.8
• Outer Diameter [mm]: 106.8
• Fitting Position: Rear Axle
• Number of Teeth, ABS ring: 45
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: Esisild, esisild paremal, esisild vasakul
• Tootja: AUTO-GH

• Ehitusaasta alates: 01.1999
• Installatsiooni pool: Esisild
• Kaablipikkus (mm): 1 035
• Pistikkontaktide arv: 2
• Anduritüüp: passiivne andur
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Tootja: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: Tagasild
• Pikkus (mm): 890
• Pistikkontaktide arv: 2
• Pistikute teostus: Male
• Pistikukatte kuju: ristkülik
• Pinge [V]: 12
• Kaal (kg): 0,15
• Värv: must
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: ENERGY

• Ehitusaasta alates: 01.1999
• Installatsiooni pool: Esisild
• Kaablipikkus (mm): 1 025
• Pistikkontaktide arv: 2
• Anduritüüp: Induktiivandur
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Tootja: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Ehitusaasta alates: 01.1999
• Fitting Position: Front Axle
• Resistor [Ohm]: 1,250
• for OE number: 8D0927803D
• Tootja: MAGNETI MARELLI
• Nimetus: MM MWSS022

• Kerenumber (VIN) kuni: 8D-1-200 000
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Siseläbimõõt [mm]: 67
• Välisläbimõõt [mm]: 107
• Jämedus/Tugevus (mm): 6
• Hammastehulk: 45
• Tootja: METZGER

• Installatsiooni pool: Esisild, esisild paremal, esisild vasakul
• Tootja: AUTO-GH

• vajaminev tükihulk: 2
• Installatsiooni pool: Esisild
• Pikkus (mm): 985
• Tootja: DENCKERMANN ZAWIESZENIE

• Inner Diameter [mm]: 67
• Outer Diameter [mm]: 107
• Number of Teeth, ABS ring: 45
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.17
• Tootja: FEBI BILSTEIN
• Lisainfo: F27176

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Ehitusaasta kuni: 12.1998
• Kerenumber (VIN) kuni: 8D-X-199999
• Fitting Position: Front Axle
• Sensor Type: Passive sensor
• Cable Length [mm]: 1,035
• Nimetus: ANDUR, RATTAP™™RETE ARV
• Tootja: MAX

• Ehitusaasta alates: 01.1999
• Ehitusaasta kuni: 10.2000
• Kerenumber (VIN) alates: 8D..X..200 001
• for OE number: 8D0 927 803 B
• Sensor Type: Passive sensor
• Overall Length [mm]: 1,025
• Fitting Position: Front Axle
• Tootja: KAMOKA

• Installatsiooni pool: Tagasild
• Sensor Type: Passive sensor
• Cable Length [mm]: 985
• Nimetus: ANDUR, RATTAP™™RETE ARV
• Tootja: MAX

• Ehitusaasta kuni: 12.1998
• Installatsiooni pool: Esisild
• Pikkus (mm): 1 040
• Pistikkontaktide arv: 2
• Pistikute teostus: Male
• Pistikukatte kuju: ristkülik
• Pinge [V]: 12
• Kaal (kg): 0,14
• Värv: must
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: ENERGY

• Installatsiooni pool: Tagasild mõlemapoolselt
• Ühenduste arv: 2
• Tootja: JPN

• Ehitusaasta alates: 01.1999
• Kerenumber (VIN) alates: 8D-X-200001
• Fitting Position: Front Axle
• Sensor Type: Passive sensor
• Cable Length [mm]: 965
• Nimetus: ANDUR, RATTAP™™RETE ARV
• Tootja: MAX

• Installatsiooni pool: esisild vasakul, esisild paremal
• Hammastehulk ABS-rõngas: 45
• Siseläbimõõt [mm]: 77
• Laius (mm): 11
• Tootja: METZGER

• Fitting Position: Rear Axle
• Resistor [Ohm]: 1,250
• Cable Length [mm]: 880
• for OE number: 8D0927807C
• Number of pins: 2
• Tootja: MAGNETI MARELLI

• Kerenumber (VIN) kuni: 8D_X_199999
• Installatsiooni pool: Esisild
• Sensor Type: Inductive Sensor
• Length [mm]: 1,030
• Tootja: DELLO AUTOMEGA

Lisainfo: ABS sensor, front, left/right

• Ehitusaasta alates: 01.1999
• Hulk: 2
• Kerenumber (VIN) alates: 8DX200001
• Fitting Position: Front Axle
• Sensor Type: Passive sensor
• Cable Length [mm]: 1,050
• Nimetus: ANDUR, RATTAP™™RETE ARV
• Tootja: MAX

• Mudeliaasta alates: 1999
• Kerenumber (VIN) alates: 8D-X-200 001
• Fitting Position: Front Axle Left, Front Axle Right
• Sensor Type: Passive sensor
• Tootja: JP GROUP
• Lisainfo: ABS sensor, front, left/right

• Installatsiooni pool: esisild mõlemapoolselt
• Ühenduste arv: 2
• Tootja: JPN

• Fitting Position: Rear Axle
• Thickness [mm]: 6
• Inner Diameter [mm]: 66.9
• Outer Diameter [mm]: 106
• Number of Teeth, ABS ring: 45
• Nimetus: ANDUR,ABS
• Tootja: MEY

• Sensor Type: Passive sensor
• Number of pins: 2
• Cable Length [mm]: 1,068
• Fitting Position: Front Axle Right, Front Axle Left
• Tootja: AUTOFREN SEINSA
• Nimetus: SE DS0016

• Ehitusaasta alates: 01.1999
• Installatsiooni pool: Esisild
• Pikkus (mm): 1 000
• Garantii: 3 aastat garantii
• Pinge [V]: 12
• Kaal (kg): 0,15
• Värv: punane/must
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY
• Nimetus: CE 06SKV009

• Kerenumber (VIN) alates: 8D_X_200001
• Installatsiooni pool: Esisild
• Tootja: DELLO AUTOMEGA

• Installatsiooni pool: Tagasild, Tagasild paremal, Tagasild vasakul
• Tootja: AUTO-GH

• Kerenumber (VIN) kuni: 8D-1-200 000
• Installatsiooni pool: Tagasild mõlemapoolselt
• Hammastehulk: 45
• Siseläbimõõt [mm]: 67
• Välisläbimõõt [mm]: 107
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Sensor Type: Passive sensor
• Number of pins: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 980
• Tootja: AUTOFREN SEINSA
• Nimetus: SE DS0031

• Sensor Type: Passive sensor
• Number of pins: 4
• Cable Length [mm]: 980
• Fitting Position: Front Axle Right, Front Axle Left
• Tootja: AUTOFREN SEINSA
• Nimetus: SE DS0012

• Ehitusaasta alates: 02.1999
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with cable
• Length [mm]: 1,031
• Braking/Driving Dynamics: for vehicles with ABS
• Tootja: TOPRAN

Sõidukivarustus: piduriklotside kulumisindikaatori näidikuga sõidukite jaoks General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Piduri-/sõidudünaamika: sõidukitele ilma ESP
• Supplementary Article/Info 2: with lid, with sensor
• Material: Plastic
• Observe system fill quantity:
• Tootja: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Kerenumber (VIN) alates: 8D-W-280001
• vajaminev tükihulk: 2, 1
• Plokieraldus:
• Sõidukivarustus: tulekaugusregulaatoriga sõidukitele e(automaatne)
• Installatsiooni pool: Tagasild paremal
• Sensor Type: Passive sensor
• Cable Length [mm]: 920
• Number of pins: 2
• paired article number: 20-0339
• Nimetus: Andur, rattap””rete arv
• Tootja: MAX

• Ehitusaasta alates: 01.1999
• Installatsiooni pool: Esisild
• Pikkus (mm): 990
• Garantii: 3 aastat garantii
• Pinge [V]: 12
• Kaal (kg): 0,14
• Värv: punane/must
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY
• Nimetus: CE 06SKV015

• Installatsiooni pool: Tagasild
• Pikkus (mm): 890
• Pistikkontaktide arv: 2
• Pistikute teostus: Male
• Pistikukatte kuju: ristkülik
• Garantii: 3 aastat garantii
• Pinge [V]: 12
• Kaal (kg): 0,15
• Värv: must
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY
• Nimetus: CE 06SKV013

• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Info 2: with cable
• Length [mm]: 954
• Braking/Driving Dynamics: for vehicles with ABS
• Tootja: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• Length [mm]: 985
• Braking/Driving Dynamics: for vehicles with ABS
• Rated Voltage [V]: 12
• Height [mm]: 39
• Required quantity: 2
• Resistor [Ohm]: 1,400
• Cable Length [mm]: 920
• Sensor Type: Inductive Sensor, Passive sensor
• Number of pins: 2
• Number of connectors: 2
• Supplementary Article/Info 2: with cable
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Seerianumber: CZW-VW-027
• Piirangutega toode/piirangu info 2: koos kaanega, koos anduriga
• Ühenduste arv: 2
• Materjal: Plastik
• jälgida süsteemi mahutavust:
• Tootja: NTY

• Ehitusaasta kuni: 12.1998
• Installatsiooni pool: Esisild
• Pikkus (mm): 1 040
• Pistikkontaktide arv: 2
• Pistikute teostus: Male
• Pistikukatte kuju: ristkülik
• Garantii: 3 aastat garantii
• Pinge [V]: 12
• Kaal (kg): 0,14
• Värv: must
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY
• Nimetus: CE 06SKV075

• vasak/paremroolimine: vasakpoolse roolimise jaoks
• Material: Plastic
• Supplementary Article/Supplementary Info: with dummy connector
• Nimetus: PAISUPAAK,PIDURIVEDELIK
• Tootja: MAX

• Installatsiooni pool: ees
• Üldine informatsioon: Wheel speed sensor; front
• Tootja: VIKA

• Installatsiooni pool: Esisild
• Ehitusaasta kuni: 12.1998
• Kerenumber (VIN) kuni: 8D-X-199999
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 1,035
• Nimetus: ANDUR, RATTAP™™RETE ARV
• Tootja: DLP
• Kvaliteediklass: PJ

• Number of pins: 2
• Connector Shape: rectangular
• Cable Length [mm]: 880
• Overall Length [mm]: 945
• Sensor Type: Inductive Sensor
• Fitting Depth [mm]: 39.3
• Fitting Position: Rear Axle Right, Rear Axle Left
• for OE number: 8D0927807C
• Tootja: MEAT&DORIA

• Installatsiooni pool: Esisild
• Ehitusaasta alates: 01.1999
• Kerenumber (VIN) alates: 8D-X-200001
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 965
• Nimetus: ANDUR, RATTAP™™RETE ARV
• Tootja: DLP

• Supplementary Article/Info 2: with lid
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Lisainfo: Brake fluid tank

• Ehitusaasta alates: 01.1999
• Sensor Type: Inductive Sensor
• Fitting Depth [mm]: 39.5
• Fitting Position: Front Axle Right, Front Axle Left
• Overall Length [mm]: 990
• Length [mm]: 400
• for OE number: 8D0927803D
• Tootja: MEAT&DORIA

• Installatsiooni pool: Tagasild
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 980
• Nimetus: ANDUR, RATTAP™™RETE ARV
• Tootja: DLP
• Kvaliteediklass: PJ

• Plug housing design: Plug sleeve housing
• Manufacturer Restriction: BMW, Volvo, VAG
• Number of pins: 3
• Cable Length [mm]: 250
• Cable Cross Section [mm²]: 1
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• SVHC: No SVHC present!
• Tootja: HBE

Nimetus: Kaabliparanduskomplekt, seadeelement- tulede ulatuse regul

• Hulk: 1
• Kaal (kg): 0,145
• vajaminev tükihulk: 1
• Üldine informatsioon: Brake fluid tank
• Tootja: VIKA

• Kerenumber (VIN) alates: 8D-X-200 001
• Sensor Type: Passive sensor
• Cable Length [mm]: 975
• Wear Warning Contact: prepared for wear warning indicator
• Number of pins: 2
• Fitting Position: Front Axle
• Nimetus: ANDUR, RATTAP™™RETE ARV
• Tootja: MEY

• Ehitusaasta alates: 01.2000
• Installatsiooni pool: esisild vasakul, esisild paremal
• Pikkus (mm): 1 025
• Anduritüüp: passiivne andur
• Kaal (kg): 0,127
• Tootja: TOMEX C

• Ehitusaasta kuni: 12.1998
• Number of pins: 2
• Connector Shape: rectangular
• Length [mm]: 1,090
• Sensor Type: Inductive Sensor
• Fitting Position: Front Axle Right, Front Axle Left
• for OE number: 8D0927803
• Tootja: MEAT & DORIA

• Weight [kg]: 9.5
• New Part:
• Packaging length [cm]: 72.5
• Packaging width [cm]: 59
• Packaging height [cm]: 34

• Kerenumber (VIN) kuni: 8D-X-199 999
• Vehicle Equipment: for vehicles without brake pad wear indicator
• Supplementary Article/Info 2: with ABS sensor ring
• Quantity Unit: Set
• Number of Teeth, ABS ring: 45
• Supplementary Article/Supplementary Info: with gasket/seal
• Fitting Position: Front Axle
• Rated Voltage [V]: 12
• Required quantity: 2
• Resistor [Ohm]: 1,200
• Cable Length [mm]: 1,070
• Sensor Type: Inductive Sensor, Passive sensor
• Number of pins: 2
• Number of connectors: 2
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Ehitusaasta kuni: 12.1999
• Installatsiooni pool: esisild vasakul, esisild paremal
• Pikkus (mm): 1 100
• Anduritüüp: passiivne andur
• Kaal (kg): 0,118
• Tootja: TOMEX C