Tootekategooriad
Filtrid Pidurid vedrustus/alusvanker Roolisüsteem Jahutus/kliima Elektrisüsteem Veokonks/lisad Jõuülekanne Väljalaskesüsteem Kere Süüte-/eelsüütesüsteem Mootor Klaasid/klaasipuhastus Valgustus Kütus Kabiinivarustus HooldusToode
Kirjeldus
Laoseis
Hind
(km-ga)
-
Fitting Position: Front Axle both sides,
inner - Tootja: JP GROUP
-
Lisainfo: Wheel bearing,
front, inner
- Height [mm]: 14.7
- Inner Diameter [mm]: 29
- Outer Diameter [mm]: 50.3
- Fitting Position: Front Axle
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Alternative Repair Kit: 100 598 0101,
100 598 0101/ SK -
Fitting Position: Rear Axle,
inner - Inner Diameter [mm]: 29
- Outer Diameter [mm]: 50
- Height [mm]: 14.73
- Bearing Type: Tapered Roller Bearing
- Nimetus: RATTALAAGER
- Tootja: MEY
- Fitting Position: Front Axle
- Width [mm]: 37
- Inner Diameter [mm]: 39
- Outer Diameter [mm]: 75
- Tootja: DELLO AUTOMEGA
- Supplementary Article/Info 2: without wheel hub
-
Fitting Position: Rear Axle,
Front Axle Left, Front Axle Right -
Fabrication Number: KLP-
AU- 002 - Tootja: NTY
-
Nimetus: NTY KLP-
AU- 002
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Installatsiooni pool: Tagasild
- Fitting Position: Front Axle
- Width [mm]: 37
- Inner Diameter [mm]: 39
- Outer Diameter [mm]: 75
- Nimetus: RATTALAAGRIKOMPLEKT
- Tootja: MAX
- Installatsiooni pool: Tagasild
- Laius (mm): 37
- Siseläbimõõt [mm]: 39
- Välisläbimõõt [mm]: 75
- Tootja: DENCKERMANN PIASTY LOZYSKA KOL
- Installatsiooni pool: Tagasild
- Laius (mm): 37
- Siseläbimõõt [mm]: 39
- Välisläbimõõt [mm]: 75
- Kvaliteediklass: PJ
- Nimetus: Wheel bearing kit
- Installatsiooni pool: Esisild
- Inner Diameter 1 [mm]: 39
- Inner Diameter 2 [mm]: 41
- Outer Diameter [mm]: 75
- Height [mm]: 37
- Tootja: JP GROUP
Lisainfo: Wheel bearing kit, for one front wheel, with combi screw
- Installatsiooni pool: Tagasild mõlemapoolselt
- Outer Diameter [mm]: 82
- Inner Diameter 1 [mm]: 45
- Inner Diameter 2 [mm]: 42.8
- Width [mm]: 37
- Bearing Type: Angular Ball Bearing
- Tootja: DELLO AUTOMEGA
- Width [mm]: 37
- Inner Diameter [mm]: 39
- Outer Diameter [mm]: 75
- Bearing Type: Angular Ball Bearing
- Fitting Position: Front Axle
- Nimetus: Rattalaagrikomplekt
- Tootja: MAX
- Installatsiooni pool: Topeltsilla agregaat
- Width [mm]: 37
- Inner Diameter [mm]: 39
- Outer Diameter 1 [mm]: 75
- Tootja: METELLI LOZYSKA KOLA PIASTY
- Installatsiooni pool: Esisild
- Inner Diameter 1 [mm]: 39
- Inner Diameter 2 [mm]: 41
- Outer Diameter [mm]: 75
- Height [mm]: 37
- Bearing Type: Ball Bearing
- Nimetus: RATTALAAGER
- Tootja: MEY
Alternative Repair Kit: 100 598 0038, 100 598 0138, 100 598 0238, 100 598 0338
- Width 1 [mm]: 37
- Outer Diameter 1 [mm]: 75
- Inner Diameter 1 [mm]: 39
- Inner Diameter 2 [mm]: 41
- Tootja: GSP
Installatsiooni pool: Tagasild vasakul, Tagasild paremal, esisild vasakul, esisild paremal
- Installatsiooni pool: Tagasild
- Outer Diameter [mm]: 75
- Inner Diameter [mm]: 39
- Width [mm]: 37
- Nimetus: RATTALAAGRIKOMPLEKT
- Tootja: MAX
- Fitting Position: Front Axle
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Bearing Type: Ball Bearing
- Nimetus: RATTALAAGRIKOMPLEKT
- Tootja: MAX
- Fitting Position: Front Axle
- Width [mm]: 37
- Outer Diameter [mm]: 75
- Tootja: KAMOKA PRZEGUBY PÓ£OSIE PIASTY
-
Installatsiooni pool: esisild vasakul,
esisild paremal - Sõiduki varustusvariant: FRRE LR+FR LR+FR
- Inner Diameter [mm]: 39
- Width 1 [mm]: 37
- Number of mounting bores: 1
- Tootja: DAYCO ZESTAWY LOZYSK KOL
-
Installatsiooni pool: esisild vasakul,
esisild paremal -
Veljesuurus (toll): 15,
0 - Inner Diameter 1 [mm]: 39
- Inner Diameter 2 [mm]: 41
- Weight [kg]: 0.7
- Outer Diameter 1 [mm]: 75
- Width 1 [mm]: 37
- Tootja: ABS
- Installatsiooni pool: Esisild
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Inner Diameter 1 [mm]: 39
- Inner Diameter 2 [mm]: 41
- Outer Diameter [mm]: 75
- Height [mm]: 37
- Bearing Type: Ball Bearing
- Nimetus: RATTALAAGRIKOMPLEKT
- Tootja: MEY
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.
- Installatsiooni pool: Esisild
- vajaminev tükihulk: 2
- Tootja: DRIVE
- Installatsiooni pool: Esisild
- Laius (mm): 37
-
Kaal (kg): 0,
68 - Siseläbimõõt [mm]: 39
- Välisläbimõõt [mm]: 75
- Tootja: METALCAUCHO
- Width [mm]: 37
- Inner Diameter [mm]: 39
- Outer Diameter [mm]: 75
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.99
-
Supplementary Article/Supplementary Info: with nuts,
with drive shaft bolt - Nimetus: RATTALAAGRIKOMPLEKT
- Tootja: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Installatsiooni pool: Esisild
-
Veljesuurus (toll): 15,
0 - Width [mm]: 37
- Inner Diameter [mm]: 39
- Outer Diameter [mm]: 75
- Supplementary Article/Info 2: with fastening material
- Inner Diameter 2 [mm]: 41
- Nimetus: RATTALAAGRIKOMPLEKT
- Tootja: OPT
- Lisainfo: F100090
- Installatsiooni pool: Tagasild
- Width [mm]: 37
- Inner Diameter [mm]: 39
- Outer Diameter [mm]: 75
- Inner Diameter 2 [mm]: 41
- Tootja: OPTIMAL
- Installatsiooni pool: Esisild
-
Veljesuurus (toll): 15,
0 - Width [mm]: 37
- Inner Diameter [mm]: 39
- Outer Diameter [mm]: 75
- Supplementary Article/Info 2: with screw
- Inner Diameter 2 [mm]: 41
- Tootja: OPTIMAL
- Width [mm]: 37
- Inner Diameter [mm]: 39
- Outer Diameter [mm]: 75
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.99
-
Supplementary Article/Supplementary Info: with drive shaft bolt,
with nuts - Nimetus: SW 30 91 7534
- Tootja: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Mudeliaasta alates: 1992
- Fitting Position: Front Axle both sides
- Weight [kg]: 0.627
- Inner Diameter [mm]: 39
- Outer Diameter [mm]: 75
- Packaging length [cm]: 7.5
- Packaging width [cm]: 7.5
- Packaging height [cm]: 3.7
- Tootja: FEBEST
-
Installatsiooni pool: Tagasild,
Esisild - vajaminev tükihulk: 2
- Plokieraldus:
- Weight [kg]: 0.966
- Packaging length [cm]: 11
- Packaging width [cm]: 9
- Packaging height [cm]: 6
- Outer Diameter [mm]: 75
- Inner Diameter [mm]: 39
- Width [mm]: 37
-
Tootja: CONTITECH-
LOÅ»YSKA KÃÅ
- Mudeliaasta alates: 1992
- Fitting Position: Rear Axle
- Weight [kg]: 0.965
- Supplementary Article/Info 2: without wheel hub
- Packaging length [cm]: 11.2
- Packaging width [cm]: 8.6
- Packaging height [cm]: 3.8
- Tootja: FEBEST
-
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal - Sõiduki varustusvariant: FRRE LR+RE LR+RE
- Inner Diameter [mm]: 43
- Width 1 [mm]: 37
- Number of mounting bores: 1
- Tootja: DAYCO ZESTAWY LOZYSK KOL
- Installatsiooni pool: Tagasild
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Inner Diameter [mm]: 39
- Outer Diameter [mm]: 75
- Width [mm]: 37
- SVHC: No SVHC present!
- Nimetus: RATTALAAGRIKOMPLEKT
- Tootja: FAG
- Installatsiooni pool: Esisild
-
Veljesuurus (toll): 16,
0 - Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Inner Diameter 2 [mm]: 45
- Tootja: OPTIMAL
- Installatsiooni pool: Esisild
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Inner Diameter [mm]: 39
- Outer Diameter [mm]: 75
- Width [mm]: 37
- SVHC: No SVHC present!
- Nimetus: RATTALAAGRIKOMPLEKT
- Tootja: FAG
- Installatsiooni pool: Esisild
- Alternative Repair Kit: 100 498 0037
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Height [mm]: 37
- Bearing Type: Ball Bearing
- Nimetus: RATTALAAGER
- Tootja: MEY
- Installatsiooni pool: Esisild
- vajaminev tükihulk: 2
- Width [mm]: 37
- Inner Diameter [mm]: 39
- Outer Diameter [mm]: 75
- Nimetus: RATTALAAGRIKOMPLEKT
- Tootja: SKF
- Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.65
-
Supplementary Article/Supplementary Info: with drive shaft bolt,
with nuts - Tootja: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Installatsiooni pool: paremal,
vasakul, Esisild - Width 1 [mm]: 37
- Inner Diameter 1 [mm]: 39
- Outer Diameter 1 [mm]: 75
- Tootja: SNR
- Nimetus: SN R157.08
-
Installatsiooni pool: paremal,
vasakul, Tagasild - Tootja: SNR
- Nimetus: SN R157.14
-
Installatsiooni pool: paremal,
vasakul, Esisild - Nimetus: SN R157.11
-
Tootja: NTN-
SNR
-
Veljesuurus (toll): 16,
0 - Plokieraldus:
- Inner Diameter 1 [mm]: 43
- Inner Diameter 2 [mm]: 45
- Weight [kg]: 0.84
- Outer Diameter 1 [mm]: 82
- Width 1 [mm]: 37
- Tootja: ABS
Installatsiooni pool: esisild vasakul, esisild paremal, Tagasild vasakul, Tagasild paremal
- Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
-
Sealing lip material: NBR
(nitrile butadiene rubber) - Bearing Type: Angular Ball Bearing
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.806
- Tootja: FEBI BILSTEIN JR.
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Siseläbimõõt [mm]: 43
- Välisläbimõõt [mm]: 82
- Laius (mm): 37
-
Installatsiooni pool: esisild vasakul,
esisild paremal - Tootja: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
Laki Auto universaaltooted
TecDoc sõidukite kataloog
TecDoc veokite kataloog