• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 268
• Brake Disc Thickness [mm]: 12
• Number of Holes: 5
• Surface: Coated

• Installatsiooni pool: Tagasild
• Piduriketta liik: täis
• Veljeaukude hulk: 5
• Kõrgus (mm): 35
• Pidurikettajämedus [mm]: 12
• Välisläbimõõt [mm]: 268
• Keskaugu läbimõõt (mm): 71
• Tootja: JPN

• Brake Disc Type: solid
• Outer Diameter [mm]: 290
• Brake Disc Thickness [mm]: 12
• Fitting Position: Rear Axle
• Number of Holes: 5
• Centering Diameter [mm]: 71
• Height [mm]: 35
• Bolt Hole Circle Ø [mm]: 108
• Minimum thickness [mm]: 10
• Nimetus: Piduriketas
• Tootja: MAX

• Installatsiooni pool: Tagasild
• Minimum thickness [mm]: 10
• Brake Disc Type: solid
• Bore Diameter [mm]: 13.2
• Brake Disc Thickness [mm]: 12
• Bolt Hole Circle Ø [mm]: 108
• Number of Holes: 5
• Inner Diameter [mm]: 133
• Height [mm]: 35
• Centering Diameter [mm]: 71.1
• Outer Diameter [mm]: 268
• Tootja: DENCKERMANN FILTRY

• Installatsiooni pool: Tagasild
• Minimum thickness [mm]: 10
• Brake Disc Type: solid
• Bore Diameter [mm]: 13.2
• Brake Disc Thickness [mm]: 12
• Bolt Hole Circle Ø [mm]: 108
• Number of Holes: 5
• Inner Diameter [mm]: 133
• Height [mm]: 35
• Centering Diameter [mm]: 71.1
• Outer Diameter [mm]: 290
• Tootja: DENCKERMANN ZAWIESZENIE
• Kogus pakendis: 2

• Outer Diameter [mm]: 268
• Brake Disc Thickness [mm]: 12
• Brake Disc Type: solid
• Fitting Position: Rear Axle
• Height [mm]: 35
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 71
• Number of Holes: 5
• Minimum thickness [mm]: 10
• Nimetus: Piduriketas
• Tootja: MAX

• Kogus pakendis: 2
• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Surface: Coated
• Outer Diameter [mm]: 268
• Brake Disc Thickness [mm]: 12
• Centering Diameter [mm]: 717
• Height [mm]: 35
• Minimum thickness [mm]: 10
• Rim Hole Number: 5
• Number of mounting bores: 2
• Supplementary Article/Info 2: without integrated wheel bearing
• Test Mark: ECE-R90
• Weight [kg]: 8.83
• Tootja: VALEO TARCZE

• Installatsiooni pool: Tagasild
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 12
• Bolt Hole Circle Ø [mm]: 108
• Number of Holes: 5
• Outer Diameter [mm]: 268
• Centering Diameter [mm]: 71
• Tootja: DELLO AUTOMEGA
• Kogus pakendis: 2

• Installatsiooni pool: Tagasild
• Tootja piirang: BOSCH
• Test Mark: R90
• Height [mm]: 35
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 12
• Outer Diameter [mm]: 268
• Number of Holes: 5
• Centering Diameter [mm]: 71.1
• Bolt Hole Circle Ø [mm]: 108
• Surface: Coated
• Tootja: KAV KAVO PARTS TARCZE
• Kogus pakendis: 2

• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Brake Disc Type: solid
• Number of Holes: 5
• Test Mark: E1 90R-02C0250/1401
• Surface: Coated
• Outer Diameter [mm]: 268
• Brake Disc Thickness [mm]: 12
• Minimum thickness [mm]: 10
• Centering Diameter [mm]: 71.1
• Height [mm]: 35
• Tootja: DELPHI LOCKHEED HAMULCE
• Nimetus: DE BG4661C

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 290
• Brake Disc Thickness [mm]: 12
• Minimum thickness [mm]: 10
• Number of bores: 5
• Height [mm]: 35
• Brake Disc Type: solid
• Surface: Painted
• Tootja: JAPKO

• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Height [mm]: 35
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 12
• Minimum thickness [mm]: 10
• Number of bores: 2
• Outer Diameter [mm]: 268
• Number of Holes: 5
• Centering Diameter [mm]: 71.1
• Bolt Hole Circle Ø [mm]: 108
• Surface: Coated
• Tootja: SKF
• Nimetus: SK VKBD90087S2

• Kogus pakendis: 2
• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 12
• Outer Diameter [mm]: 290
• Height [mm]: 35
• Centering Diameter [mm]: 71.1
• Surface: Coated
• Supplementary Article/Info 2: with bolts/screws
• Minimum thickness [mm]: 10
• Tootja: OPTIMAL ZAWIESZENIE

• Installatsiooni pool: Tagasild
• Piduriketta liik: täis
• Pidurikettajämedus [mm]: 12
• Välisläbimõõt [mm]: 268
• Kaal (kg): 4,3
• Kõrgus (mm): 35
• Aukude arv: 5
• Ava Ø (mm): 108
• Tsentri läbimõõt (mm): 71
• Pealispind: kaetud
• Miinimumjämedus (mm): 10
• Ava läbimõõt kuni [mm]: 13,3
• Nimetus: ALT 128260FCAL
• Tootja: ALTE AUTOMOTIVE

• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Outer Diameter [mm]: 268
• Brake Disc Thickness [mm]: 12
• Minimum thickness [mm]: 10
• Height [mm]: 35
• Rim Hole Number: 5
• Brake Disc Type: solid
• Centering Diameter [mm]: 71
• Bolt Hole Circle Ø [mm]: 108
• Surface: Coated
• Hub Diameter [mm]: 142
• Weight [kg]: 4.24
• Installation Information: Important: Observe Fitting Instructions
• Tootja: A.B.S.

• Installatsiooni pool: Tagasild
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 12
• Bolt Hole Circle Ø [mm]: 108
• Number of Holes: 5
• Outer Diameter [mm]: 290
• Centering Diameter [mm]: 71
• Tootja: DELLO AUTOMEGA
• Kogus pakendis: 2

• Fitting Position: Front Axle
• Outer Diameter [mm]: 304
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 26
• Height [mm]: 48
• Number of bores: 5
• Brake Disc Type: Vented
• Surface: Painted
• Tootja: ASHIKA
• Lisainfo: 60-00-0600C

• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Brake Disc Type: solid
• Number of Holes: 5
• Outer Diameter [mm]: 268
• Centering Diameter [mm]: 71
• Height [mm]: 35
• Brake Disc Thickness [mm]: 12
• Minimum thickness [mm]: 10
• Bolt Hole Circle Ø [mm]: 108
• Bore Diameter 1 [mm]: 13.3
• Bore Diameter 2 [mm]: 8.6
• Colour: black
• Surface: Painted
• Test Mark: E190R-02C0190/0535
• Nimetus: PIDURIKETAS
• Tootja: TRW
• Kvaliteediklass: Q

SVHC: No information available, please contact the manufacturer!

• Kogus pakendis: 2
• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 268
• Brake Disc Thickness [mm]: 12
• Centering Diameter [mm]: 71
• Height [mm]: 35
• Minimum thickness [mm]: 10
• Rim Hole Number: 5
• Number of mounting bores: 2
• Supplementary Article/Info 2: with screw
• Test Mark: ECE-R90
• Weight [kg]: 8.83
• Tootja: VALEO

• Installatsiooni pool: Tagasild
• Outer Diameter [mm]: 268
• Brake Disc Thickness [mm]: 12
• Minimum thickness [mm]: 10
• Height [mm]: 35
• Bolt Hole Circle Ø [mm]: 108
• Brake Disc Type: solid
• Centering Diameter [mm]: 71
• Number of Holes: 5
• Surface: Coated
• Machining: High-carbon
• fulfils ECE norm: ECE-R90
• Bore Diameter up to [mm]: 13
• Nimetus: PIDURIKETAS
• Tootja: BOS
• Kogus pakendis: 2

• Installatsiooni pool: Tagasild
• Outer Diameter [mm]: 290
• Brake Disc Thickness [mm]: 12
• Minimum thickness [mm]: 10
• Height [mm]: 35
• Bolt Hole Circle Ø [mm]: 108
• Brake Disc Type: solid
• Centering Diameter [mm]: 71.07
• Number of Holes: 5
• Surface: Coated
• Machining: High-carbon
• Supplementary Article/Info 2: with bolts/screws
• fulfils ECE norm: ECE-R90
• Bore Diameter up to [mm]: 13.3
• Nimetus: PIDURIKETAS
• Tootja: BOS
• Kogus pakendis: 2

• Installatsiooni pool: Esisild
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 28
• Bolt Hole Circle Ø [mm]: 108
• Number of Holes: 5
• Outer Diameter [mm]: 304
• Centering Diameter [mm]: 71
• Tootja: DELLO AUTOMEGA
• Kogus pakendis: 2

• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 28
• Outer Diameter [mm]: 304
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 71
• Height [mm]: 48
• Fitting Position: Front Axle
• Minimum thickness [mm]: 26
• Nimetus: PIDURIKETAS
• Tootja: MAX
• Lisainfo: 19-2749

• Outer Diameter [mm]: 268
• Brake Disc Thickness [mm]: 12
• Brake Disc Type: solid
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 10
• Height [mm]: 35
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 71.1
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Surface: Painted
• Number of Holes: 5
• Nimetus: Piduriketas
• Tootja: QUARO

• Installatsiooni pool: Esisild
• Tootja piirang: ATE
• Height [mm]: 48.1
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 28
• Outer Diameter [mm]: 304
• Number of Holes: 5
• Centering Diameter [mm]: 71
• Bolt Hole Circle Ø [mm]: 108
• Surface: Coated
• Tootja: KAV KAVO PARTS TARCZE
• Kogus pakendis: 2

• Kogus pakendis: 2
• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 290
• Brake Disc Thickness [mm]: 12
• Centering Diameter [mm]: 71
• Height [mm]: 35
• Minimum thickness [mm]: 10
• Rim Hole Number: 5
• Number of mounting bores: 3
• Supplementary Article/Info 2: with screw
• Test Mark: ECE-R90
• Weight [kg]: 9.98
• Tootja: VALEO

• Installatsiooni pool: Esisild
• Minimum thickness [mm]: 26
• Brake Disc Type: Vented
• Bore Diameter [mm]: 13.2
• Brake Disc Thickness [mm]: 28
• Bolt Hole Circle Ø [mm]: 108
• Number of Holes: 5
• Inner Diameter [mm]: 133.2
• Height [mm]: 48
• Centering Diameter [mm]: 71
• Outer Diameter [mm]: 304
• Tootja: DENCKERMANN HAMULCE
• Kogus pakendis: 2

• Installatsiooni pool: Tagasild
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 12
• Outer Diameter [mm]: 268
• Height [mm]: 35
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 71
• Surface: Coated
• Rim Hole Number: 5
• Nimetus: Piduriketas
• Tootja: QUARO

• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 12
• Number of Holes: 5
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 35
• Centering Diameter [mm]: 71
• Outer Diameter [mm]: 268
• Surface: Coated
• Minimum thickness [mm]: 10
• Tootja: BREMBO
• Nimetus: BR 08.C308.11
• Kvaliteediklass: Q

• Installatsiooni pool: Tagasild
• Brake Disc Type: solid
• Outer Diameter [mm]: 268
• Brake Disc Thickness [mm]: 12
• Height [mm]: 35
• Minimum thickness [mm]: 10
• Surface: Coated
• Inner Diameter [mm]: 132.9
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 71.1
• Hole Arrangement/Number: 05/07
• Wheel Bolt Bore Diameter [mm]: 13.3
• Weight [kg]: 4.2
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 8DD355120491
• Tootja: HELLA PAGID

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Surface: Coated
• Outer Diameter [mm]: 304
• Brake Disc Thickness [mm]: 28
• Centering Diameter [mm]: 71
• Height [mm]: 48.1
• Minimum thickness [mm]: 26
• Rim Hole Number: 5
• Number of mounting bores: 3
• Supplementary Article/Info 2: without integrated wheel bearing
• Test Mark: ECE-R90
• Weight [kg]: 9.25
• Tootja: VALEO

• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Brake Disc Type: solid
• Surface: Coated
• Outer Diameter [mm]: 268
• Brake Disc Thickness [mm]: 12
• Height [mm]: 35
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 71
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 10
• Weight [kg]: 4.2
• Hole Arrangement/Number: 7/5
• Tootja: ZIMMERMANN

• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Brake Disc Type: Vented
• Material: Grey Cast Iron
• Surface: Coated
• Colour: grey
• Supplementary Article/Info 2: without wheel bearing
• Outer Diameter [mm]: 304
• Brake Disc Thickness [mm]: 28
• Height [mm]: 48.1
• Centering Diameter [mm]: 71
• Bolt Hole Circle Ø [mm]: 108
• Minimum thickness [mm]: 26
• Number of Holes: 5
• Tootja: BRECK TARCZE HAMULCOWE

• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Brake Disc Type: Vented
• Outer Diameter [mm]: 304
• Brake Disc Thickness [mm]: 28
• Required quantity: 2
• Replace in pairs only:
• Height [mm]: 48
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 71
• Number of Holes: 5
• Test Mark: ECE R90
• Assy./disassy. by qualified personnel required!:
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Brake Disc Type: solid
• Outer Diameter [mm]: 268
• Brake Disc Thickness [mm]: 12
• Height [mm]: 35
• Minimum thickness [mm]: 10
• Surface: Coated
• Inner Diameter [mm]: 132.9
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 71.1
• Hole Arrangement/Number: 05/07
• Wheel Bolt Bore Diameter [mm]: 13.3
• Packaging length [cm]: 27.8
• Packaging width [cm]: 27.8
• Packaging height [cm]: 8.4
• Weight [kg]: 4.2
• Nimetus: PIDURIKETAS
• Tootja: TEX

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Installatsiooni pool: Esisild
• Piduriketta liik: õhutusega
• Veljeaukude hulk: 5
• Kõrgus (mm): 48,1
• Pidurikettajämedus [mm]: 28
• Välisläbimõõt [mm]: 304
• Keskaugu läbimõõt (mm): 71
• Rattapoldi ava läbimõõt [mm]: 108
• Tootja: JPN

• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Outer Diameter [mm]: 290
• Brake Disc Thickness [mm]: 12
• Minimum thickness [mm]: 10
• Brake Disc Type: solid
• Surface: Coated
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 108
• Height [mm]: 35
• Centering Diameter [mm]: 71.1
• Inner Diameter [mm]: 133
• Bore Diameter [mm]: 13.2
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Test Mark: E1 90R-02C0165/0619
• Nimetus: Piduriketas
• Tootja: ATE
• Kvaliteediklass: Q

• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Outer Diameter [mm]: 268
• Brake Disc Thickness [mm]: 12
• Minimum thickness [mm]: 10
• Brake Disc Type: solid
• Surface: Coated
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 108
• Height [mm]: 35
• Centering Diameter [mm]: 71.1
• Inner Diameter [mm]: 133
• Bore Diameter [mm]: 13.2
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Test Mark: E1 90R-02C0165/0618
• Nimetus: PIDURIKETAS
• Tootja: ATE

• Brake Disc Thickness [mm]: 28
• Rim Hole Number: 5
• Number of mounting bores: 3
• Thickness [mm]: 48.1
• Outer Diameter [mm]: 304
• Bolt Hole Circle Ø [mm]: 108
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 26
• Centering Diameter [mm]: 71
• Weight [kg]: 8.66
• Observe service information:
• Tootja: FEBI BILSTEIN
• Kogus pakendis: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Height [mm]: 48.1
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 26
• Number of bores: 3
• Outer Diameter [mm]: 304
• Number of Holes: 5
• Centering Diameter [mm]: 71
• Bolt Hole Circle Ø [mm]: 108
• Surface: Coated
• Tootja: SKF TARCZE HAM

• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Brake Disc Type: Vented
• Number of Holes: 5
• Test Mark: E4 90R-02C0703/2629
• Surface: Coated
• Outer Diameter [mm]: 304
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 26
• Centering Diameter [mm]: 71
• Height [mm]: 48.1
• Tootja: DELPHI LOCKHEED HAMULCE
• Nimetus: DE BG4696C

• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Outer Diameter [mm]: 304
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 26
• Height [mm]: 48.1
• Rim Hole Number: 5
• Brake Disc Type: Vented
• Centering Diameter [mm]: 71
• Bolt Hole Circle Ø [mm]: 108
• Surface: Coated
• Hub Diameter [mm]: 143
• Weight [kg]: 8.78
• Installation Information: Important: Observe Fitting Instructions
• Tootja: A.B.S.

• Kogus pakendis: 2
• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 28
• Outer Diameter [mm]: 304
• Height [mm]: 48
• Number of Holes: 5
• Centering Diameter [mm]: 71
• Bolt Hole Circle Ø [mm]: 108
• Surface: Painted
• Weight [kg]: 17.6
• Minimum thickness [mm]: 26
• Tootja: TOMEX BRAKES

• Installatsiooni pool: Tagasild
• paaris tootenumbrid: 573605J
• Kogus pakendis: 2
• Brake Disc Type: solid
• Outer Diameter [mm]: 268
• Brake Disc Thickness [mm]: 12
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 35
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 71
• Number of mounting bores: 2
• Number of Holes: 5
• Quantity Unit: Set
• Surface: Coated
• Version: JC
• Weight [kg]: 8.83
• Bore Diameter [mm]: 13.3
• Minimum thickness [mm]: 10
• Packing Type: Box
• Bore Diameter 2 [mm]: 13.3
• Packaging length [cm]: 28.2
• Packaging width [cm]: 28.2
• Packaging height [cm]: 9
• Tootja: JURID

• Brake Disc Thickness [mm]: 28
• Rim Hole Number: 5
• Number of mounting bores: 3
• Thickness [mm]: 48.1
• Outer Diameter [mm]: 304
• Bolt Hole Circle Ø [mm]: 108
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 26
• Centering Diameter [mm]: 71
• Weight [kg]: 8.66
• Nimetus: SW 62 94 3865
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Brake Disc Thickness [mm]: 28
• Rim Hole Number: 5
• Number of mounting bores: 3
• Thickness [mm]: 48
• Outer Diameter [mm]: 304
• Bolt Hole Circle Ø [mm]: 108
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 26
• Centering Diameter [mm]: 71
• Weight [kg]: 8.66
• Observe service information:
• Tootja: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 28
• Outer Diameter [mm]: 304
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 71
• Height [mm]: 48
• Minimum thickness [mm]: 26
• Colour: black
• Surface: Painted
• Test Mark: E1 90R-02 C0176/0642
• Nimetus: PIDURIKETAS
• Tootja: TRW
• Kvaliteediklass: Q

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Brake Disc Thickness [mm]: 28
• Brake Disc Type: Vented, slotted/perforated
• Outer Diameter [mm]: 304
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 71
• Height [mm]: 48
• Surface: Painted
• Minimum thickness [mm]: 26
• Nimetus: PIDURIKETAS
• Tootja: MAX

• Installatsiooni pool: Esisild
• Outer Diameter [mm]: 304
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 26
• Height [mm]: 48.1
• Bolt Hole Circle Ø [mm]: 108
• Brake Disc Type: Vented
• Centering Diameter [mm]: 71
• Number of Holes: 5
• Surface: Coated
• Machining: High-carbon
• fulfils ECE norm: ECE-R90
• Bore Diameter up to [mm]: 13.3
• Tootja: BOSCH
• Nimetus: BS 0986479A89

• Rim Hole Number: 5
• Fitting Position: Front Axle
• Height [mm]: 48.1
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 26
• Outer Diameter [mm]: 304
• Number of Holes: 3
• Centering Diameter [mm]: 71
• Tootja: DRIVE

• Installatsiooni pool: Esisild
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 30
• Bolt Hole Circle Ø [mm]: 108
• Number of Holes: 5
• Outer Diameter [mm]: 330
• Centering Diameter [mm]: 71
• Tootja: DELLO AUTOMEGA
• Kogus pakendis: 2

• Installatsiooni pool: Esisild
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 304
• Brake Disc Thickness [mm]: 28
• Height [mm]: 48.1
• Minimum thickness [mm]: 26
• Surface: Coated
• Inner Diameter [mm]: 133
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 71
• Hole Arrangement/Number: 05/08
• Wheel Bolt Bore Diameter [mm]: 13.3
• Weight [kg]: 8.6
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 8DD355117331
• Tootja: HELLA PAGID

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Installatsiooni pool: Esisild
• Outer Diameter [mm]: 304
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 26
• Brake Disc Type: Vented
• Surface: Coated
• Machining: High-carbon
• Number of Holes: 5
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Bolt Hole Circle Ø [mm]: 108
• Height [mm]: 48
• Centering Diameter [mm]: 71
• Inner Diameter [mm]: 133.2
• Bore Diameter [mm]: 13.2
• Test Mark: E1 90R-02C0115/0883
• Nimetus: Piduriketas
• Tootja: ATE
• Kogus pakendis: 2
• Kvaliteediklass: Q

• Installatsiooni pool: Esisild
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 28
• Number of Holes: 5
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 48
• Centering Diameter [mm]: 71
• Outer Diameter [mm]: 304
• Machining: High-carbon
• Surface: Coated
• Minimum thickness [mm]: 26
• Nimetus: BR 09.C133.11
• Tootja: BREMBO
• Kogus pakendis: 2

• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 304
• Brake Disc Thickness [mm]: 28
• Height [mm]: 48.1
• Minimum thickness [mm]: 26
• Machining: High-carbon
• Surface: Coated
• Inner Diameter [mm]: 133
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 71
• Hole Arrangement/Number: 05/08
• Wheel Bolt Bore Diameter [mm]: 13.3
• Packaging length [cm]: 32.8
• Packaging width [cm]: 32.8
• Packaging height [cm]: 12.5
• Weight [kg]: 8.6
• Nimetus: Piduriketas
• Tootja: TEX

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Brake Disc Type: internally vented
• Surface: Coated
• Outer Diameter [mm]: 304
• Brake Disc Thickness [mm]: 28
• Height [mm]: 48
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 71
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 26
• Weight [kg]: 8.7
• Hole Arrangement/Number: 8/5
• Tootja: ZIMMERMANN

• Installatsiooni pool: Esisild
• Outer Diameter [mm]: 330
• Brake Disc Thickness [mm]: 30
• Minimum thickness [mm]: 28
• Height [mm]: 48
• Bolt Hole Circle Ø [mm]: 108
• Brake Disc Type: Vented
• Centering Diameter [mm]: 71.1
• Number of Holes: 5
• Surface: Coated
• Machining: High-carbon
• fulfils ECE norm: ECE-R90
• Bore Diameter up to [mm]: 13.2
• Nimetus: Piduriketas
• Tootja: BOS

• Kogus pakendis: 2
• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 28
• Outer Diameter [mm]: 304
• Manufacturer Restriction: ATE
• Height [mm]: 48.1
• Machining: High-carbon
• Centering Diameter [mm]: 71
• Surface: Coated
• Supplementary Article/Info 2: with bolts/screws
• Minimum thickness [mm]: 26
• Hole Arrangement/Number: 5/8
• Tootja: OPTIMAL ZAWIESZENIE

• Installatsiooni pool: Esisild
• Outer Diameter [mm]: 330
• Brake Disc Thickness [mm]: 30
• Minimum thickness [mm]: 28
• Brake Disc Type: Vented
• Machining: Alloyed/High-carbon
• Surface: Coated
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 108
• Height [mm]: 48
• Centering Diameter [mm]: 71.1
• Inner Diameter [mm]: 138
• Bore Diameter [mm]: 13.2
• Supplementary Article/Info 2: with bolts/screws
• Test Mark: E1 90R-02C0115/1107
• MAPP code available:
• Nimetus: Piduriketas
• Tootja: ATE

• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Brake Disc Type: internally vented, Perforated
• Surface: Coated
• Outer Diameter [mm]: 304
• Brake Disc Thickness [mm]: 28
• Height [mm]: 48
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 71
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 26
• Weight [kg]: 8.5
• Hole Arrangement/Number: 8/5
• Tootja: ZIMMERMANN

• Installatsiooni pool: Esisild
• Brake Disc Type: perforated/vented
• Brake Disc Thickness [mm]: 28
• Number of Holes: 5
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 48
• Centering Diameter [mm]: 71
• Outer Diameter [mm]: 303.5
• Machining: High-carbon
• Surface: Coated
• Minimum thickness [mm]: 26.5
• Nimetus: BR 09.C133.1X
• Tootja: BREMBO
• Kogus pakendis: 2

General Information: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.