• Rims: for steel rims
• Spanner Size: 19
• Internal Thread [mm]: M 12 x 1,5
• Wheel Fastening: Conical Seat F
• for OE number: 1470843
• Tootja: DELLO AUTOMEGA

• Rims: for steel rims
• Thickness [mm]: 15
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 10
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Wheel Fastening: Conical Seat F
• Material: Steel
• Fitting Position: Front Axle, Rear Axle
• Weight [kg]: 0.02
• Observe service information:
• Nimetus: RATTAMUTTER
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Rims: for steel rims
• Thickness [mm]: 15
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 10
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Wheel Fastening: Conical Seat F
• Material: Steel
• Fitting Position: Front Axle, Rear Axle
• Weight [kg]: 0.02
• Observe service information:
• Nimetus: RATTAMUTTER
• Tootja: FEB
• Lisainfo: FE27413

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Rims: for steel rims
• Thickness [mm]: 15
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 10
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Wheel Fastening: Conical Seat F
• Material: Steel
• Fitting Position: Front Axle, Rear Axle
• Weight [kg]: 0.02
• Observe service information:
• Tootja: SWAG
• Lisainfo: 50 92 7413 SWA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, Front Axle
• for OE number: 1 470 843
• Internal Thread [mm]: M12 x 1,5
• Spanner Size: 19
• Thickness [mm]: 15
• Quality/ Grade: 10
• Weight [kg]: 0.021
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: Esisild, Tagasild
• Võtmekaugus: 19
• Kvaliteet/klass: 10
• Rattakinnitus: koonus F
• Tootja: FAST

• Length [mm]: 46
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 26
• Quality/ Grade: 10.9
• Shaft Length [mm]: 13
• Material: Steel
• Surface: Zink flake coated
• Screw length below head [mm]: 42
• Bolt/Nut Version: Knurled Bolt
• Knurl Diameter [mm]: 13
• Bolt Head Ø [mm]: 19
• Weight [kg]: 0.04
• Nimetus: RATTAPOLDID
• Tootja: FEB
• Lisainfo: FE32307

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 46
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 26
• Quality/ Grade: 10.9
• Shaft Length [mm]: 13
• Material: Steel
• Surface: Zink flake coated
• Screw length below head [mm]: 42
• Bolt/Nut Version: Knurled Bolt
• Knurl Diameter [mm]: 13
• Bolt Head Ø [mm]: 19
• Weight [kg]: 0.04
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 46
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 26
• Quality/ Grade: 10.9
• Shaft Length [mm]: 13
• Material: Steel
• Surface: Zink flake coated
• Screw length below head [mm]: 42
• Bolt/Nut Version: Knurled Bolt
• Knurl Diameter [mm]: 13
• Bolt Head Ø [mm]: 19
• Weight [kg]: 0.04
• Nimetus: Rattapoldid
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pikkus (mm): 46
• Materjal: Metall
• Pealispind: Tsink-lamell-kattega
• Keermepikkus (mm): 26
• Poldipea Ø ( mm ): 19
• Eesvõll, käigukast [mm]: 13
• Kruvipikkus kruvipea all [mm]: 42
• Voldi läbimõõt [mm]: 13
• Tootja: FAST

• Rims: for light alloy rims, for steel rims
• Thickness [mm]: 31
• Outer Diameter [mm]: 28
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 10
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Wheel Fastening: Conical Seat F
• Material: Steel
• Surface: Chromed
• Supplementary Article/Info 2: with lid
• Fitting Position: Rear Axle, Front Axle
• Weight [kg]: 0.06
• Observe service information:
• Nimetus: RATTAMUTTER
• Tootja: FEB
• Lisainfo: F29463

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Rims: for light alloy rims
• Thickness [mm]: 27.5
• Outer Diameter [mm]: 28
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 8
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Wheel Fastening: Conical Seat F
• Material: Steel
• Surface: Zinc-coated
• Fitting Position: Rear Axle, Front Axle
• Weight [kg]: 0.058
• Observe service information:
• Nimetus: RATTAMUTTER
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Rims: for light alloy rims
• Thickness [mm]: 27.5
• Outer Diameter [mm]: 28
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 8
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Wheel Fastening: Conical Seat F
• Material: Steel
• Surface: Zinc-coated
• Fitting Position: Rear Axle, Front Axle
• Weight [kg]: 0.058
• Observe service information:
• Tootja: SWAG
• Nimetus: SW 50 90 7176
• Lisainfo: 50 90 7176 SWA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Rims: for light alloy rims
• Thickness [mm]: 27.5
• Outer Diameter [mm]: 28
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 8
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Wheel Fastening: Conical Seat F
• Material: Steel
• Surface: Zinc-coated
• Fitting Position: Rear Axle, Front Axle
• Weight [kg]: 0.058
• Observe service information:
• Nimetus: RATTAMUTTER
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Internal Thread [mm]: M12 x 1,5
• Wheel Fastening: Conical Seat F
• Fitting Position: Rear Axle, Front Axle
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Weight [kg]: 0.06
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Internal Thread [mm]: M12 x 1,5
• Fitting Position: Rear Axle, Front Axle
• Spanner Size: 19
• Thickness [mm]: 31
• Bolt Head-/Nut Design: Male Hex
• Quality/ Grade: 8
• Weight [kg]: 0.057
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• OE-numbri jaoks: 1 678 260
• Installatsiooni pool: Tagasild, Esisild
• Materjal: Metall
• Võtmekaugus: 19
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Kvaliteet/klass: 10
• Pealispind: kroomitud
• Rattakinnitus: koonus F
• Piirangutega toode/piirangu info 2: koos kaanega
• Hooldusinfot jälgida:
• Seerianumber: KSP-FR-000
• Tootja: NTY

• Thickness [mm]: 26
• Outer Diameter [mm]: 23.7
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 8
• Spanner Size: 17, 19
• Wheel Fastening: Conical Seat F
• Material: Steel
• Surface: Chromed
• Fitting Position: Front Axle, Rear Axle
• Weight [kg]: 0.26
• for OE number: M115
• Lockable: Lockable
• Tootja: SWAG
• Nimetus: SW 81 92 7057
• Lisainfo: 81 92 7057 SWA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 26
• Outer Diameter [mm]: 23.7
• Internal Thread Size: M12 x 1,5
• Quality/ Grade: 8
• Spanner Size: 17, 19
• Wheel Fastening: Conical Seat F
• Material: Steel
• Surface: Chromed
• Fitting Position: Front Axle, Rear Axle
• Weight [kg]: 0.26
• Lockable: Lockable
• for OE number: M115
• Nimetus: RATTAMUTTER
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 46
• Quality/ Grade: 10,9
• Thread Length [mm]: 26
• External Thread [mm]: M12 x 1,5
• Quantity: 16
• Rims: for steel rims
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.