• Installatsiooni pool: Tagasild
• Pidurisüsteem: ATE
• Kaal (kg): 0,04

• Installatsiooni pool: Esisild
• Pidurisüsteem: ATE
• Kaal (kg): 0,1

Lisainfo: Sensor, brake lining wear, rear

• Installatsiooni pool: Esisild
• Pikkus (mm): 16
• Keermemõõt: M8x1,25
• Pöördeliik: koos väliskeermega
• Võtmekaugus: Hex-6
• Nimetus: Kruvi,piduriketas
• Tootja: QBK
• Lisainfo: M8x1.25 16,0mm Hex-6 2tk

• Installatsiooni pool: Tagasild
• Pidurisüsteem: ATE
• Nimetus: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Tootja: QBK

• Installatsiooni pool: Esisild
• Pikkus (mm): 16
• Keermemõõt: M8x1,25
• Pöördeliik: koos väliskeermega
• Võtmekaugus: Hex-6
• Nimetus: Kruvi,piduriketas
• Tootja: TRI

• Installatsiooni pool: Tagasild
• Pidurisüsteem: ATE
• Hulk: 2
• Tootja: DELPHI LOCKHEED HAMULCE
• Nimetus: DE LX0136
• Kvaliteediklass: PJ

Lisainfo: "Tootja: DELPHI
BMW E36/E34/E32/M5
(kvaliteediklass: PJ)"

• Installatsiooni pool: Esisild
• Pikkus (mm): 15,7
• Keermemõõt: M8X1,25
• Materjal: Metall
• Pealispind: Kroom-(VI)-vaba passiveerimine
• Kruvipea-/Mutriprofiil: sisekuuskant
• ka universaaltootena saadav vaata toode-nr.: TPM1000
• Nimetus: Kruvi,piduriketas
• Tootja: TEX

• Installatsiooni pool: esisild vasakul, paigaldatud ainult ühel pool
• Piduriliik: Ketaspidur
• Pikkus (mm): 840
• Seerianumber: HCZ-BM-021
• Tootja: NTY

• Piduriliik: Ketaspidur
• Installatsiooni pool: Tagasild
• Pikkus (mm): 1 095
• Nimetus: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Tootja: MAX

• pidurikettaläbimõõdule (mm): 300
• Installatsiooni pool: Tagasild
• Pidurisüsteem: ATE (Teves)
• Tootja: FRENKIT
• Nimetus: FR 901097

• Installatsiooni pool: Tagasild
• Hoiatuskontakti pikkus (mm): 1 093
• Piduriliik: Ketaspidur
• Kaal (kg): 0,06
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• vajaminev tükihulk: 1
• Installatsiooni pool: Esisild
• Piduriliik: Ketaspidur
• Pikkus (mm): 840
• Tootja: DENCKERMANN ZAWIESZENIE

• Installatsiooni pool: Tagasild
• Piduriliik: Ketaspidur
• Pikkus (mm): 1 086
• Seerianumber: HCZ-BM-019
• Tootja: NTY
• Nimetus: NTY HCZ-BM-019

• Installatsiooni pool: esisild vasakul
• Piduriseade: sõidukitele ilma Performance pidurita
• Piduriliik: Ketaspidur
• Pikkus (mm): 850
• Nimetus: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Tootja: MAX

• Installatsiooni pool: Tagasild
• Pidurisüsteem: ATE
• Kvaliteediklass: PJ
• Nimetus: Brake pads fitting kit

• Installatsiooni pool: Esisild, esisild vasakul
• Piduriliik: Ketaspidur
• Pikkus (mm): 850
• Nimetus: Hoiatuskontakt, piduriklotsi kulumine
• Tootja: MAX
• Lisainfo: 23-0120

• Installatsiooni pool: Tagasild
• Pidurisüsteem: ATE
• Tootja: BOSCH

• Installatsiooni pool: Esisild
• Piduriliik: Ketaspidur
• Pidurisüsteem: ATE
• Pikkus (mm): 726
• Piirangutega toode/piirangu info: Sillakomplekt
• Tootja: QUICK BRAKE
• Nimetus: QB WS0317A

• Installatsiooni pool: Esisild
• Pidurisüsteem: ATE
• Nimetus: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Tootja: QBK

• Installatsiooni pool: Tagasild
• Piduriliik: Ketaspidur
• Pidurisüsteem: ATE
• Pikkus (mm): 1 110
• Piirangutega toode/piirangu info: Sillakomplekt
• Nimetus: Hoiatuskontakt, piduriklotsi kulumine
• Tootja: QBK

• Installatsiooni pool: Tagasild
• Pidurisüsteem: ATE
• Pikkus 1 [mm]: 1
• Piduriliik: Ketaspidur
• Tootja: DELPHI LOCKHEED HAMULCE
• Kvaliteediklass: PJ
• Nimetus: Wear indicator

• pidurikettaläbimõõdule (mm): 300, 312
• Installatsiooni pool: Esisild
• Pidurisüsteem: ATE (Teves)
• Nimetus: FR 901751
• Tootja: FRENKIT

• Installatsiooni pool: esisild vasakul, Esisild
• Piduriseade: sõidukitele ilma Performance pidurita
• Hoiatuskontakti pikkus (mm): 850
• Piduriliik: Ketaspidur
• Kaal (kg): 0,05
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: Tagasild
• pidurikettaläbimõõdule (mm): 300
• Piduriliik: Ketaspidur
• Pikkus (mm): 1 090
• Tootja piirang: ATE
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Nimetus: Hoiatuskontakt, piduriklotsi kulumine
• Tootja: TRW

• Installatsiooni pool: Esisild
• Pidurisüsteem: ATE
• Pikkus 1 [mm]: 722
• Piduriliik: Ketaspidur
• Nimetus: DE LZ0253
• Tootja: DELPHI

• Installatsiooni pool: esisild vasakul
• Piduriseade: sõidukitele ilma Performance pidurita
• Piduriliik: Ketaspidur
• Pikkus (mm): 850
• pakendi pikkus [cm]: 18,5
• pakendi laius [cm]: 1
• pakendi kõrgus [cm]: 1,2
• Kaal (kg): 0,05
• Tootja: MINTEX

• Installatsiooni pool: Tagasild
• Piduriliik: Ketaspidur
• Pikkus (mm): 1 095
• pakendi pikkus [cm]: 18,5
• pakendi laius [cm]: 1
• pakendi kõrgus [cm]: 1,2
• Kaal (kg): 0,037
• Tootja: MINTEX

• Installatsiooni pool: Esisild
• Piduriseade: sõidukitele Performance piduriga
• Piduriliik: Ketaspidur
• Pikkus (mm): 695
• pakendi pikkus [cm]: 18,5
• pakendi laius [cm]: 1
• pakendi kõrgus [cm]: 1,2
• Kaal (kg): 0,034
• Tootja: MINTEX

• Installatsiooni pool: Esisild
• Piduriliik: Ketaspidur
• Tootja piirang: ATE
• Pikkus (mm): 850
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Nimetus: Hoiatuskontakt, piduriklotsi kulumine
• Tootja: TRW

• Installatsiooni pool: Esisild
• Pikkus (mm): 850
• Piduriliik: Ketaspidur
• Tootja: BOSCH
• Nimetus: BS 1987473030

• Installatsiooni pool: esisild paremal
• Siseläbimõõt [mm]: 160
• Välisläbimõõt [mm]: 355
• pidurikettaläbimõõdule (mm): 330
• paaris tootenumbrid: 131-07-163
• Värv: hõbedane
• soovitava lisavarustuse artiklinumber: 231-03-179
• Tootja: ABAKUS DEPO/LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Installatsiooni pool: esisild vasakul
• Siseläbimõõt [mm]: 160
• Välisläbimõõt [mm]: 355
• pidurikettaläbimõõdule (mm): 330
• paaris tootenumbrid: 131-07-164
• Värv: hõbedane
• soovitava lisavarustuse artiklinumber: 231-03-179
• Tootja: ABAKUS DEPO/LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Piduriliik: Ketaspidur
• Installatsiooni pool: Tagasild
• Hoiatuskontakti pikkus (mm): 1 093
• vajaminev tükihulk: 1
• Nimetus: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Tootja: MEY

• Installatsiooni pool: Tagasild
• Pikkus (mm): 1 095
• Piduriliik: Ketaspidur
• Tootja: BOSCH
• Nimetus: BS 1987473069

• Installatsiooni pool: esisild paremal
• Seerianumber: HTO-BM-044
• paaris tootenumbrid: HTO-BM-043
• Tootja: NTY

• Installatsiooni pool: esisild vasakul
• Seerianumber: HTO-BM-043
• paaris tootenumbrid: HTO-BM-044
• Tootja: NTY

• Mootorikood: N51 B30 A
• paaris tootenumbrid: 176423
• Installatsiooni pool: esisild vasakul
• Kaal (kg): 0,35
• Nimetus: Plekk,piduriketas
• Tootja: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: N51 B30 A
• paaris tootenumbrid: 176422
• Installatsiooni pool: esisild paremal
• Kaal (kg): 0,124
• Nimetus: Plekk,piduriketas
• Tootja: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pikkus (mm): 954
• MAPP-code olemas:
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Seerianumber: HCA-BM-032

• Installatsiooni pool: esisild vasakul, esisild paremal
• Pikkus (mm): 635
• Anduritüüp: Aktiivne andur
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Seerianumber: HCA-BM-033

• Installatsiooni pool: Tagasild
• Piduriliik: Ketaspidur
• Pikkus (mm): 1 095
• pakendi pikkus [cm]: 26
• pakendi laius [cm]: 15
• pakendi kõrgus [cm]: 1
• Kaal (kg): 0,059
• Nimetus: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Tootja: TEX

• Mootorikood: N51 B30 A
• paaris tootenumbrid: 33 10 5741
• Installatsiooni pool: esisild vasakul
• Kaal (kg): 0,35
• Nimetus: SW 33 10 5743
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: N51 B30 A
• paaris tootenumbrid: 33 10 5743
• Installatsiooni pool: esisild paremal
• Kaal (kg): 0,124
• Nimetus: SW 33 10 5741
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• vajaminev tükihulk: 1
• Installatsiooni pool: Tagasild
• Piduriliik: Ketaspidur
• Pikkus (mm): 1 086
• Nimetus: Hoiatuskontakt, piduriklotsi kulumine
• Tootja: ATE

• vajaminev tükihulk: 1
• Installatsiooni pool: Esisild
• Piduriliik: Ketaspidur
• Pikkus (mm): 840
• Nimetus: Hoiatuskontakt, piduriklotsi kulumine
• Tootja: ATE

• Installatsiooni pool: esisild vasakul
• Piduriseade: sõidukitele ilma Performance pidurita
• Piduriliik: Ketaspidur
• Pikkus (mm): 850
• pakendi pikkus [cm]: 26
• pakendi laius [cm]: 15
• pakendi kõrgus [cm]: 1
• Kaal (kg): 0,05
• Nimetus: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Tootja: TEX

• Installatsiooni pool: Esisild
• Piduriseade: sõidukitele Performance piduriga
• Piduriliik: Ketaspidur
• Pikkus (mm): 695
• pakendi pikkus [cm]: 26
• pakendi laius [cm]: 15
• pakendi kõrgus [cm]: 1
• Kaal (kg): 0,037
• Nimetus: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Tootja: TEX

• Installatsiooni pool: esisild vasakul, esisild paremal
• Seerianumber: HCA-BM-031

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Pikkus (mm): 1 010
• Pistikkontaktide arv: 2
• Installatsiooni sügavus (mm): 41,1
• Seerianumber: HCA-BM-034

• vajaminev tükihulk: 2
• Installatsiooni pool: Tagasild
• Pikkus (mm): 954
• Tootja: DENCKERMANN FILTRY

• Installatsiooni pool: Tagasild vasakul
• Siseläbimõõt [mm]: 111
• Välisläbimõõt [mm]: 370
• paaris tootenumbrid: 131-07-678
• Värv: must
• Materjal: Alumiinium
• Pealispind: KTL-kattega (katoodne sukelduskatmine)
• soovitava lisavarustuse artiklinumber: 231-04-085
• Tootja: ABAKUS DEPO/LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Installatsiooni pool: Tagasild paremal
• Siseläbimõõt [mm]: 111
• Välisläbimõõt [mm]: 370
• paaris tootenumbrid: 131-07-677
• Värv: must
• Materjal: Alumiinium
• Pealispind: KTL-kattega (katoodne sukelduskatmine)
• soovitava lisavarustuse artiklinumber: 231-04-085
• Tootja: ABAKUS DEPO/LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Installatsiooni pool: Esisild
• Pidurisüsteem: ATE
• Eriotstarbe-sõid.: mitte ametkondlikele sõidukitele
• Tootja: METZGER

• Installatsiooni pool: Esisild
• Pidurisüsteem: ATE
• Tootja: BOSCH

• vajaminev tükihulk: 2
• Installatsiooni pool: Esisild
• Pikkus (mm): 660
• Tootja: DENCKERMANN FILTRY

• Mootorikood: N51 B30 A
• Installatsiooni pool: Tagasild vasakul
• Kaal (kg): 0,18
• Nimetus: SW 33 11 0163
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Esisild
• Anduritüüp: Aktiivne andur
• Kaablipikkus (mm): 558
• Nimetus: Andur, rattap””rete arv
• Tootja: MAX

• Installatsiooni pool: Tagasild vasakul
• Kvaliteet: WP
• pidurikettaläbimõõdule (mm): 300, 336
• Läbimõõt 1/Läbimõõt 2 (mm): 370/115
• Pealispind: tsingitud

• Installatsiooni pool: Tagasild paremal
• Kvaliteet: WP
• pidurikettaläbimõõdule (mm): 300, 336
• Läbimõõt 1/Läbimõõt 2 (mm): 370/115
• Pealispind: tsingitud

• Installatsiooni pool: Esisild
• Kaablipikkus (mm): 558
• Anduritüüp: Aktiivne andur
• Tootja: OPTIMAL ZAWIESZENIE

• vajaminev tükihulk: 2
• Installatsiooni pool: Tagasild
• Piirangutega toode/piirangu info 2: koos kaabliga
• Tootja: BREMI

• Installatsiooni pool: Esisild
• Anduritüüp: Aktiivne andur
• kasutatud klemmide arv: 2
• Kaablipikkus (mm): 558
• Nimetus: Andur, rattap””rete arv
• Tootja: DLP

• vajaminev tükihulk: 2
• Installatsiooni pool: Esisild
• Piirangutega toode/piirangu info 2: koos kaabliga
• Tootja: BREMI

• Installatsiooni pool: Tagasild
• Anduritüüp: Aktiivne andur
• kasutatud klemmide arv: 2
• Kaablipikkus (mm): 490
• Nimetus: ANDUR, RATTAP™™RETE ARV
• Tootja: DLP

• Mootorikood: N51 B30 A
• Pikkus (mm): 685
• Ühenduste arv: 2
• Installatsiooni pool: esisild vasakul, esisild paremal
• Nimetus: SW 20 94 7361
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Tagasild
• Anduritüüp: Aktiivne andur
• Piirangutega toode/piirangu info 2: koos kaabliga
• pikkus üle kõige (mm): 1 005
• temperatuurivahemik alates [°C]: −40
• Temperatuurivahemik kuni [°C]: 150
• Tootja: BOSCH UK£ADY HAMULCOWE

• vajaminev tükihulk: 2
• Installatsiooni pool: Esisild
• Pikkus (mm): 660
• MAPP-code olemas:
• Tootja: ATE