• Filter type: In-Line Filter
• Height [mm]: 300
• Outer Diameter [mm]: 55
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Lisainfo: Fuel filter

• Fitting Position: Rear Axle
• Brake System: Teves
• Height [mm]: 43.7
• Width [mm]: 123
• Thickness [mm]: 17.3
• Wear Warning Contact: prepared for wear warning indicator
• Lisainfo: Brake Pad Set, disc brake

• Fitting Position: Rear Axle
• Brake System: ATE
• Height [mm]: 44.9
• Width [mm]: 123
• Thickness [mm]: 17.3
• Lisainfo: Brake pad set, rear, 17.3 mm

Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact

• Filter type: In-Line Filter
• Height [mm]: 300
• Outer Diameter [mm]: 55
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8

• Fitting Position: Front Axle
• Brake System: Teves
• Height [mm]: 57.7
• Width [mm]: 151
• Thickness [mm]: 17.8
• Wear Warning Contact: prepared for wear warning indicator
• Lisainfo: Brake pad set, front, 17.8 mm

• Filter type: In-Line Filter
• Height [mm]: 300
• Housing Diameter [mm]: 55
• Tootja: DELLO AUTOMEGA

• Filter type: In-Line Filter
• Height [mm]: 300
• Outer Diameter 1 [mm]: 55
• Outer Diameter 2 [mm]: 55
• Inner Diameter 1 [mm]: 8
• Inner Diameter 2 [mm]: 8
• Tootja: DENCKERMANN FILTRY

• Installatsiooni pool: Tagasild
• Brake System: ATE
• Width [mm]: 123
• Height [mm]: 44.9
• Thickness [mm]: 17.3
• Test Mark: ECE R90
• Assy./disassy. by qualified personnel required!:
• Tootja: ABAKUS

Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: Tagasild
• Ehitusaasta alates: 05.1997
• Diameter [mm]: 161
• Width [mm]: 25
• Tootja: DENCKERMANN ZAWIESZENIE

• Outer Diameter [mm]: 55
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Height [mm]: 305
• Filter type: Filter Insert
• Nimetus: BM FE1318
• Tootja: BREMSI

• Filter type: In-Line Filter
• Housing material: Metal
• Length [mm]: 300
• Outer Diameter [mm]: 55
• Weight [kg]: 0.29
• Observe service information:
• Tootja: BLUE PRINT FILTRY

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Tagasild
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Tootja piirang: ATE
• Kõrgus 1 (mm): 43,5
• Pidurisüsteem: ATE
• Laius 1 (mm): 123
• Jämedus/Tugevus 1 (mm): 16,5
• Tootja: JPN

• Fitting Position: Front Axle
• Brake System: ATE
• Width 1 [mm]: 150.1
• Width 2 [mm]: 151.3
• Height [mm]: 57.3
• Thickness [mm]: 17.8
• Test Mark: ECE R90
• Assy./disassy. by qualified personnel required!:
• Tootja: ABAKUS

Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle
• Width [mm]: 123
• Thickness [mm]: 17
• Height [mm]: 45
• Wear Warning Contact: excl. wear warning contact
• Brake System: ATE
• Tootja: KAMOKA
• Lisainfo: JQ1011700 KAMOKA

• Fitting Position: Rear Axle
• Thickness [mm]: 16.3
• Height [mm]: 44.8
• Brake System: TEVES
• Tootja: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Width [mm]: 123
• Thickness [mm]: 17.3
• Height [mm]: 44.9
• Brake System: ATE
• Tootja: DENCKERMANN HAMULCE

Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact

• Filter type: In-Line Filter
• Housing material: Metal
• Length [mm]: 300
• Outer Diameter [mm]: 55
• Weight [kg]: 0.296
• Tootja: FEBI BILSTEIN
• Lisainfo: F12650

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: In-Line Filter
• Outer Diameter [mm]: 55
• Height [mm]: 300
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Housing material: Aluminium
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: Tagasild
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Tootja piirang: ATE
• Kõrgus 1 (mm): 43,5
• Pidurisüsteem: ATE
• Laius 1 (mm): 123
• Jämedus/Tugevus 1 (mm): 16,5
• Tootja: PROFIPOWER

• Thickness [mm]: 16.7
• Test Mark: R90 Homologated
• Length [mm]: 123
• Weight [kg]: 0.885
• Height 1 [mm]: 43.6
• Wear Warning Contact: prepared for wear warning indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: ATE
• Packing Type: Carton
• Supplementary Article/Info 2: with piston clip
• WVA Number: 20180, 20181
• Fitting Position: Rear Axle
• Tootja: ASHIKA-KLOCKI

• soovitava lisavarustuse artiklinumber: 98008200
• Thickness [mm]: 16.1
• Test Mark: R90 Homologated
• Length [mm]: 123.1
• Weight [kg]: 0.885
• Height 1 [mm]: 45
• Wear Warning Contact: prepared for wear warning indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: ATE
• Packing Type: Carton
• Supplementary Article/Info 2: with piston clip
• WVA Number: 21934
• Fitting Position: Rear Axle
• Tootja: ASHIKA-KLOCKI

• Installatsiooni pool: Esisild
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Tootja piirang: ATE
• Kõrgus 1 (mm): 57,5
• Laius 1 (mm): 151,4
• Jämedus/Tugevus 1 (mm): 17
• Tootja: JPN

• Filter type: In-Line Filter
• Outer Diameter [mm]: 55
• Height [mm]: 302
• Tootja: HENGST FILTER

• Installatsiooni pool: Esisild
• Ehitusaasta kuni: 12.1997
• Kogus pakendis: 4
• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear warning indicator
• Height [mm]: 57.5
• Width [mm]: 151.5
• Thickness [mm]: 17.5
• Tootja: AUTO-GH

• Installatsiooni pool: Esisild
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Tootja piirang: ATE
• Kõrgus 1 (mm): 57,5
• Laius 1 (mm): 151,4
• Jämedus/Tugevus 1 (mm): 17
• Tootja: PROFIPOWER

• Fitting Position: Rear Axle
• Brake System: TEVES
• Width [mm]: 123
• Height [mm]: 44
• Thickness [mm]: 16.5
• WVA Number: 20180
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• Nimetus: VA 301386
• Tootja: VALEO

• Fitting Position: Front Axle
• Thickness [mm]: 17
• Height [mm]: 57
• Wear Warning Contact: excl. wear warning contact
• Brake System: ATE
• Width 1 [mm]: 150
• Width 2 [mm]: 151
• Tootja: KAMOKA

• Filter type: In-Line Filter
• Height [mm]: 299
• Outer Diameter [mm]: 55
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• SVHC: No SVHC present!
• Tootja: FILTRON

• Fitting Position: Front Axle
• Thickness [mm]: 17.8
• Height [mm]: 57.3
• Brake System: ATE
• Width 1 [mm]: 150.1
• Width 2 [mm]: 151.3
• Tootja: DENCKERMANN ZAWIESZENIE

Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact

• Filtritüüp: Ühendusfilter
• Läbimõõt [mm]: 55
• Kõrgus (mm): 299
• Sisend-Ø (mm): 8
• Väljalase-Ø (mm): 8
• Tootja: PROFIPOWER

• Installatsiooni pool: Tagasild
• Width 1 [mm]: 123
• Height 1 [mm]: 43.5
• Thickness 1 [mm]: 16.5
• Brake System: ATE
• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear warning indicator
• Weight [kg]: 0.88
• Installation Information: Important: Observe Fitting Instructions
• Tootja: ABS

• Kõrgus (mm): 300
• Välisläbimõõt [mm]: 55
• Konteineri tüüp: Sahtel
• Filtritüüp: Ühendusfilter
• Sisend-Ø (mm): 8
• Väljalase-Ø (mm): 8
• pakendi pikkus [cm]: 6,5
• pakendi laius [cm]: 6,5
• pakendi kõrgus [cm]: 31
• Nimetus: CH CFF100238
• Tootja: CHAMPION

• pidurikettaläbimõõdule (mm): 280
• Length [mm]: 123
• Width [mm]: 45
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 17
• Wear Warning Contact: prepared for wear warning indicator
• Weight [kg]: 0.819
• Observe service information:
• Tootja: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fuel Mixture Formation: Petrol Injection
• Filter type: In-Line Filter
• Diameter [mm]: 55
• Height [mm]: 300
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Tootja: BOSCH
• Nimetus: BS 0450905905

• Installatsiooni pool: Tagasild
• Kogus pakendis: 4
• FMSI Code: D396-7286
• Test Mark: E1 90R-01878/647
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• WVA Number: 20995, 20996
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear warning indicator
• Width 1 [mm]: 123.2
• Width 2 [mm]: 123
• Height 1 [mm]: 45
• Height 2 [mm]: 45
• Thickness 1 [mm]: 16.8
• Thickness 2 [mm]: 16.8
• Nimetus: DE LP555
• Tootja: DELPHI

• Mootorikood: M52B28
• Sõidukivarustus: Aktiivsöemahutita sõidukitele
• Filter type: In-Line Filter
• Height [mm]: 299
• Outer Diameter [mm]: 55
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Nimetus: VA 587014
• Tootja: VALEO

• Installatsiooni pool: Tagasild
• Kogus pakendis: 4
• FMSI Code: D396-7449 D692-7286
• Test Mark: E1 90R-01878/697
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• WVA Number: 20180, 20181
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear warning indicator
• Width 1 [mm]: 123.3
• Width 2 [mm]: 122.9
• Height 1 [mm]: 43.7
• Height 2 [mm]: 43.7
• Thickness 1 [mm]: 16.7
• Thickness 2 [mm]: 16.7
• Nimetus: DE LP907
• Tootja: DELPHI

• pidurikettaläbimõõdule (mm): 280
• Length [mm]: 123.1
• Width [mm]: 45
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 17
• Wear Warning Contact: prepared for wear warning indicator
• Weight [kg]: 0.819
• Observe service information:
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• pidurikettaläbimõõdule (mm): 280
• Length [mm]: 123.1
• Width [mm]: 45
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 17
• Wear Warning Contact: prepared for wear warning indicator
• Weight [kg]: 0.819
• Nimetus: SW 20 91 6196
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Test Mark: R90 Homologated
• Wear Warning Contact: prepared for wear warning indicator
• Thickness [mm]: 17.8
• Length [mm]: 150
• Width [mm]: 57.5
• Brake System: ATE
• WVA Number: 23287, 23288
• Tootja: ASHIKA-KLOCKI

• Fitting Position: Front Axle
• Brake System: TEVES
• Width [mm]: 152
• Height [mm]: 57.7
• Thickness [mm]: 17
• WVA Number: 21292
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 1.4
• Nimetus: VA 301018
• Tootja: VALEO

• Installatsiooni pool: Esisild
• Width 1 [mm]: 151.4
• Height 1 [mm]: 57.5
• Thickness 1 [mm]: 17
• Brake System: ATE
• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear warning indicator
• Weight [kg]: 1.48
• Installation Information: Important: Observe Fitting Instructions
• Tootja: ABS

• Installatsiooni pool: Tagasild
• Kogus pakendis: 4
• Width [mm]: 123
• Thickness [mm]: 17
• Height [mm]: 45
• Wear Warning Contact: prepared for wear warning indicator
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Teves
• Supplementary Article/Info 2: with piston clip, with anti-squeak plate
• WVA Number: 21934, 21935
• Tootja: BREMBO
• Nimetus: BR P 06 025

• Ehitusaasta kuni: 12.1997
• Kogus pakendis: 4
• Fitting Position: Front Axle
• Thickness [mm]: 17.5
• Width [mm]: 151.5
• Height [mm]: 57.5
• Wear Warning Contact: prepared for wear warning indicator
• Brake System: ATE
• Weight [kg]: 1.37
• Tootja: TOMEX

• Ehitusaasta alates: 02.1998
• Installatsiooni pool: Esisild
• Kogus pakendis: 4
• Number of pads: 4
• Thickness [mm]: 17.5
• Length [mm]: 151.4
• Height [mm]: 57.5
• Wear Warning Contact: prepared for wear warning indicator
• Brake Lining: With bevelled edges
• Brake System: ATE
• WVA Number: 21643, 21644
• Nimetus: SK VKBP80180
• Tootja: SKF

• Filter type: In-Line Filter
• Diameter [mm]: 55
• Height [mm]: 300
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Net Weight [g]: 301
• Packaging height [cm]: 31
• Packaging length [cm]: 6.5
• Packaging width [cm]: 6.5
• Nimetus: KN KL66
• Tootja: KNECHT

• Length [mm]: 151.5, 150
• Width [mm]: 57.5
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Fitting Position: Front Axle
• Thickness 1 [mm]: 17.5
• Wear Warning Contact: prepared for wear warning indicator
• Weight [kg]: 1.48
• Observe service information:
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 152, 150
• Width [mm]: 58
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Fitting Position: Front Axle
• Thickness 1 [mm]: 18
• Wear Warning Contact: prepared for wear warning indicator
• Weight [kg]: 1.48
• Observe service information:
• Tootja: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Tagasild
• Article number of recommended accessories: 1987474154, 1987474956, 1987474926
• Observe technical data:
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 20180
• Thickness [mm]: 17
• Width [mm]: 123
• Height [mm]: 44.9
• Brake System: ATE
• Tootja: BOSCH

• Installatsiooni pool: Esisild
• Ehitusaasta kuni: 12.1997
• Kogus pakendis: 4
• FMSI Code: D558-7437
• Test Mark: E1 90R-01881/548
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• WVA Number: 21292, 21293
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear warning indicator
• Width 1 [mm]: 151.5
• Width 2 [mm]: 151.3
• Height 1 [mm]: 57.7
• Height 2 [mm]: 57.7
• Thickness 1 [mm]: 17.3
• Thickness 2 [mm]: 17.3
• Nimetus: DE LP710
• Tootja: DELPHI

• Installatsiooni pool: Esisild
• Ehitusaasta alates: 01.1998
• Kogus pakendis: 4
• FMSI Code: D781-7649 D781-7847
• Test Mark: E1 90R-01881/680
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• WVA Number: 21925, 21926
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear warning indicator
• Width 1 [mm]: 151.6
• Width 2 [mm]: 150.1
• Height 1 [mm]: 57.7
• Height 2 [mm]: 57.7
• Thickness 1 [mm]: 16.8
• Thickness 2 [mm]: 16.8
• Nimetus: DE LP1421
• Tootja: DELPHI

• Kogus pakendis: 4
• Fitting Position: Front Axle
• Thickness [mm]: 17.5
• Height [mm]: 57.5
• Wear Warning Contact: prepared for wear warning indicator
• Brake System: ATE
• Width 1 [mm]: 151.5
• Width 2 [mm]: 150
• Weight [kg]: 1.5
• Tootja: TOMEX

• Length [mm]: 151.5, 150
• Width [mm]: 57.5
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Fitting Position: Front Axle
• Thickness 1 [mm]: 17.5
• Wear Warning Contact: excl. wear warning contact
• Weight [kg]: 1.48
• Nimetus: SW 20 91 6343
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Tagasild
• Kogus pakendis: 4
• Width [mm]: 123
• Thickness [mm]: 17
• Height [mm]: 44
• Wear Warning Contact: prepared for wear warning indicator
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Teves
• Supplementary Article/Info 2: with piston clip, with anti-squeak plate
• WVA Number: 20181, 21607
• Tootja: BREMBO
• Nimetus: BR P 06 013

• Installatsiooni pool: Esisild
• Kogus pakendis: 4
• Thickness [mm]: 18
• Height [mm]: 58
• Wear Warning Contact: prepared for wear warning indicator
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Teves
• Width 1 [mm]: 151
• Width 2 [mm]: 150
• Supplementary Article/Info 2: with piston clip, with anti-squeak plate
• WVA Number: 23287, 23288
• Nimetus: BR P 06 024
• Tootja: BREMBO

• Installatsiooni pool: Tagasild
• Kogus pakendis: 4
• Brake System: ATE-TEVES
• Width [mm]: 123
• Height [mm]: 45
• Thickness [mm]: 17
• Wear Warning Contact: prepared for wear warning indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Tootja: ZIMMERMANN

• Installatsiooni pool: Esisild
• Supplementary Article/Info 2: with piston clip, with anti-squeak plate
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 23288
• Thickness [mm]: 17.8
• Height [mm]: 57.5
• Width 1 [mm]: 150.1
• Width 2 [mm]: 151.3
• Brake System: ATE
• Tootja: BOSCH

• Filter type: In-Line Filter
• Height [mm]: 300
• Outer Diameter [mm]: 55
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• SVHC: No SVHC present!
• Tootja: MANN+HUMMEL

• Installatsiooni pool: Esisild
• Ehitusaasta alates: 01.1998
• Kogus pakendis: 4
• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear warning indicator
• Test Mark: E9 90R 01705/047
• Height [mm]: 57.5
• Length 1 [mm]: 151.5
• Thickness [mm]: 17.5
• Length 2 [mm]: 150
• Tootja: LUCAS

SVHC: No information available, please contact the manufacturer!

• Installatsiooni pool: Esisild
• Width 1 [mm]: 150.1
• Width 2 [mm]: 151.3
• Height [mm]: 57.3
• Thickness [mm]: 17.8
• Brake System: ATE
• Test Mark: E1 90R-02A0334/0275
• MAPP code available:
• Article number of recommended accessories: 24.8190-0207.2, 24.8190-0220.2
• Observe dimensions:
• Tootja: ATE

Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact

• Installatsiooni pool: Esisild
• Ehitusaasta kuni: 12.1997
• Kogus pakendis: 4
• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear warning indicator
• Test Mark: E1 90R 01024/165
• Height [mm]: 57.5
• Width [mm]: 151.5
• Thickness [mm]: 17.5
• Tootja: LUCAS

SVHC: No information available, please contact the manufacturer!

• Installatsiooni pool: Tagasild
• Kogus pakendis: 4
• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear warning indicator
• Test Mark: E1 90R 01025/178
• Height [mm]: 44.9
• Width [mm]: 123.1
• Thickness [mm]: 17
• Tootja: LUCAS

SVHC: No information available, please contact the manufacturer!

• Installatsiooni pool: Tagasild
• Kogus pakendis: 4
• Brake System: ATE
• Supplementary Article/Supplementary Info: without accessories
• Supplementary Article/Info 2: with piston clip
• Width [mm]: 123
• Height [mm]: 43.6
• Height 1 [mm]: 43.6
• Thickness [mm]: 16.7
• Article number of recommended accessories: FWI232, FWI254
• WVA Number: 20181, 21934
• Test Mark: R90 Homologated
• Wear Warning Contact: prepared for wear warning indicator
• Weight [kg]: 0.9
• Packing Type: Carton
• Packaging length [cm]: 16.8
• Packaging width [cm]: 9.7
• Packaging height [cm]: 6.2
• Tootja: JURID

• Installatsiooni pool: Esisild
• Ehitusaasta alates: 01.1998
• Kogus pakendis: 4
• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear warning indicator
• Length 1 [mm]: 151.5
• Height [mm]: 57.5
• Thickness [mm]: 17.5
• Test Mark: E9 90R-02A1062/3614
• Length 2 [mm]: 150
• Tootja: LUCAS

Braking System: Low dust brake pads, also for perforated brake discs SVHC: No information available, please contact the manufacturer!

• Installatsiooni pool: Esisild
• Kogus pakendis: 4
• Brake System: ATE-TEVES
• Width [mm]: 152
• Height [mm]: 58
• Thickness [mm]: 18
• Wear Warning Contact: prepared for wear warning indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Tootja: ZIMMERMANN

• Installatsiooni pool: Tagasild
• Width [mm]: 123
• Height [mm]: 44.9
• Thickness [mm]: 17.3
• Brake System: ATE
• Test Mark: E1 90R-02A0498/0352
• MAPP code available:
• Observe dimensions:
• Tootja: ATE

Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact Article number of recommended accessories: 24.8190-0206.2, 24.8190-0211.2, 24.8190-0213.2, 24.8190-0221.2, 24.8190-0229.2, 24.8190-2802.2

• Installatsiooni pool: Esisild
• Kogus pakendis: 4
• Brake System: ATE
• Supplementary Article/Supplementary Info: without accessories
• Width [mm]: 150
• Height [mm]: 57.5
• Height 1 [mm]: 57.5
• Thickness [mm]: 17.8
• Article number of recommended accessories: FWI205, FWI258
• WVA Number: 21914
• Test Mark: R90 Homologated
• Wear Warning Contact: prepared for wear warning indicator
• Weight [kg]: 1.4
• Packing Type: Carton
• Packaging length [cm]: 20.6
• Packaging width [cm]: 12.2
• Packaging height [cm]: 7.8
• Tootja: JURID

• Installatsiooni pool: Tagasild
• soovitava lisavarustuse artiklinumber: 8DK 355 250-161
• Kogus pakendis: 4
• Width [mm]: 123
• Height [mm]: 45.3
• Thickness [mm]: 17.3
• Wear Warning Contact: prepared for wear warning indicator
• WVA Number: 21607
• Brake System: Teves
• Article number of recommended accessories: 8DZ 355 201-141
• Weight [kg]: 0.9
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 8DB355007511
• Tootja: HELLA PAGID

• Installatsiooni pool: Esisild
• Width 1 [mm]: 150.1
• Width 2 [mm]: 151.3
• Height [mm]: 57.3
• Thickness [mm]: 17.8
• Brake System: ATE
• Test Mark: E1 90R-02A0258/0274
• MAPP code available:
• Article number of recommended accessories: 24.8190-0207.2, 24.8190-0220.2
• Observe dimensions:
• Permissible up to vehicle capacity [kW]: 225
• Tootja: ATE

Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact Technical Information: Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.

• Installatsiooni pool: Esisild
• Kogus pakendis: 4
• Brake System: ATE
• Width [mm]: 151
• Height 1 [mm]: 57
• Thickness [mm]: 17.8
• Material: Ceramic
• Article number of recommended accessories: FWI205, FWI258
• WVA Number: 21914
• Test Mark: R90 Homologated
• Wear Warning Contact: prepared for wear warning indicator
• Packing Type: Carton
• Packaging length [cm]: 17.5
• Packaging width [cm]: 11
• Packaging height [cm]: 8.5
• Tootja: JURID

• Installatsiooni pool: Tagasild
• Width [mm]: 123
• Height [mm]: 44.9
• Thickness [mm]: 17.3
• Brake System: ATE
• Test Mark: E1 90R-02A0258/0352
• MAPP code available:
• Observe dimensions:
• Permissible up to vehicle capacity [kW]: 225
• Tootja: ATE

Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact Article number of recommended accessories: 24.8190-0206.2, 24.8190-0211.2, 24.8190-0213.2, 24.8190-0221.2, 24.8190-0229.2, 24.8190-2802.2 Technical Information: Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.

• Installatsiooni pool: Esisild
• Kogus pakendis: 4
• Braking System: Low dust brake pads
• Brake System: ATE-TEVES
• Width 1 [mm]: 152
• Width 2 [mm]: 150
• Height [mm]: 58
• Thickness [mm]: 18
• Wear Warning Contact: prepared for wear warning indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Tootja: ZIMMERMANN