• Ehitusaasta alates: 09.1998
• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Switch Point [°C]: -40, 150
• Thread Size: M12x1,5
• Spanner Size: 22
• Colour: black
• Number of pins: 2
• Lisainfo: Temperature sensor for cooling system

• Number of pins: 4
• Colour: black
• Lisainfo: Temperature sensor for cooling system

• Length [mm]: 52
• Spanner Size: 19
• Housing Colour: white
• Tootja: KAMOKA

• Length [mm]: 48
• Spanner Size: 22
• Fitting Position: Cylinder Head
• Housing Colour: black
• Tootja: KAMOKA

• Fabrication Number: ECT-BM-011
• Tootja: NTY

• Fabrication Number: ECT-BM-010
• Tootja: NTY

Tootja: MAGNETI MARELLI

• Length [mm]: 68
• Spanner Size: 22
• Housing Colour: black
• Tootja: KAMOKA

• Mootorikood: M52 B28 (286S1)
• Ehitusaasta kuni: 09.1998
• Connector Shape: round
• Sensor Type: NTC Sensor
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Number of pins: 2
• Tootja: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Mootorikood: M52 B28 (286S1)
• Ehitusaasta alates: 09.1998
• Connector Shape: rectangular
• Sensor Type: NTC Sensor
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• Spanner Size: 22
• Thread Size: M12x1.5
• for OE number: 13621433076
• Supplementary Article/Info 2: with seal ring
• Tootja: NRF

• Thread Size: M12x1.5
• Tootja: VERNET

• Number of pins: 2
• Colour: black
• Material: Plastic
• Tootja: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: round
• Number of pins: 4
• Socket colour: black
• Spanner Size: 22
• Thread Size: M12x1.5
• for OE number: 13621703993
• Supplementary Article/Info 2: with seal ring
• Tootja: NRF

• Connector Shape: rectangular
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S22
• Thread Size: M12*1,5
• Tootja: NISSENS
• Nimetus: NI 207088

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Mootorikood: M52286S1/M52286S2
• Housing Colour: black
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 22
• Tootja: DELPHI
• Nimetus: DE TS10270

• Ehitusaasta alates: 09.1998
• Length [mm]: 49
• External Thread Size: M12 x 1,5
• Spanner Size: 22
• Number of connectors: 2
• Colour: black
• Fitting Position: Cylinder Head
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fabrication Number: ECT-BM-013
• Tootja: NTY

• Ehitusaasta alates: 09.1998
• Length [mm]: 48.5
• External Thread Size: M12 x 1,5
• Spanner Size: 22
• Number of connectors: 2
• Colour: black
• Fitting Position: Cylinder Head
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Nimetus: SW 20 92 9344
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Ehitusaasta alates: 09.1998
• Length [mm]: 49
• External Thread Size: M12 x 1,5
• Spanner Size: 22
• Number of connectors: 2
• Colour: black
• Fitting Position: Cylinder Head
• Weight [kg]: 0.028
• Supplementary Article/Info 2: with seal ring
• Tootja: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.01
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Nimetus: CE 17SKV341
• Tootja: ESEN SKV

• Number of pins: 2
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Mootorikood: M52 B28 (286S1)
• Ehitusaasta alates: 09.1998
• Thread Size: M12x1,5
• Spanner Size: 22
• Nimetus: EP 1.830.272
• Tootja: EPS

• Mootorikood: M52 B28 (286S1)
• Ehitusaasta alates: 09.1998
• Thread Size: M12x1,5
• Spanner Size: 22
• Tootja: FACET

• Number of pins: 4
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6
• for OE number: 13621703993, MEK000020, MEK100160A

• Number of pins: 2
• Colour: black
• Supplementary Article/Supplementary Info: with gasket/seal
• Thread Size: M12x1,5, M 12x1,5
• Spanner Size: 22
• Connector Shape: angular
• Fitting Position: Cylinder Head
• Version: IAM
• Power [W]: 0.06
• Tootja: METZGER

• for OE number: 12 14 1 703 277
• Cable Length [mm]: 760
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: rectangular
• Socket colour: black
• Fabrication Number: ECP-BM-002
• Tootja: NTY

• Thread Size: M12 x 1,5
• Spanner Size: 22
• Number of pins: 2
• Tootja: ERA

• Ehitusaasta kuni: 03.1998
• Cable Length [mm]: 785
• Number of pins: 3
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Cable Length [mm]: 760
• Sensor Type: Active sensor
• Tootja: KAMOKA

• Thread Size: M12x1,5
• Spanner Size: 22
• Sensor Type: NTC Sensor
• Number of pins: 2
• Mounting Type: Vertical Screw Fitting
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 6PT009107851
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fabrication Number: ECP-BM-008
• Tootja: NTY

• Ehitusaasta kuni: 09.1998
• Housing Colour: black
• Number of pins: 2
• Thread Size: M 12x1,5
• Tootja: FAE

• Ehitusaasta alates: 09.1998
• Thread Size: M12x1,5
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Tootja: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 97.5
• Number of connectors: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.02
• Always compare old and new part (in particular OE No.):
• Tootja: SKV GERMANY
• Nimetus: CE 17SKV647

• Number of pins: 3
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Tootja: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Ehitusaasta kuni: 09.1998
• Length [mm]: 68
• External Thread Size: M12 x 1,5
• Spanner Size: 22
• Number of connectors: 4
• Colour: black
• Screw length below head [mm]: 25
• Weight [kg]: 0.025
• Supplementary Article/Info 2: with seal ring
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Ehitusaasta kuni: 03.1998
• Tootja: NRF

• Ehitusaasta kuni: 09.1998
• Length [mm]: 68
• External Thread Size: M12 x 1,5
• Spanner Size: 22
• Number of connectors: 4
• Colour: black
• Screw length below head [mm]: 25
• Weight [kg]: 0.025
• Supplementary Article/Info 2: with seal ring
• Nimetus: SW 20 93 2915
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: M52 B28 (286S1)
• Ehitusaasta kuni: 08.1998
• Thread Size: M12x1,5
• Spanner Size: 22
• Tootja: FACET

• Height [mm]: 33
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Tootja: VERNET

Tootja: MAGNETI MARELLI

• Ehitusaasta alates: 04.1998
• Tootja: NRF

• Height [mm]: 65.9
• Thread Size: M12x1,5
• Alternatively:
• Number of pins: 4
• Supplementary Article/Info 2: with seal ring
• Tootja: VIEROL

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mootorikood: M52 B28 (286S1)
• Ehitusaasta kuni: 08.1998
• Thread Size: M12x1,5
• Spanner Size: 22
• Tootja: EPS

• Ehitusaasta kuni: 09.1998
• Mootorikood: M52286S1/M52286S2
• Cable Length [mm]: 700
• Number of pins: 3
• Nimetus: DE SS10893
• Tootja: DELPHI

• vajaminev tükihulk: 1
• Ehitusaasta alates: 04.1998
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Tootja: BREMI

• Transmission Type: Automatic Transmission
• Length [mm]: 86
• Colour: black, silver
• Assy./disassy. by qualified personnel required!:
• Tootja: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Ehitusaasta alates: 09.1998
• mudeli koodi jaoks: 3 Pin
• Number of pins: 3
• Nimetus: DE SS10205-12B1
• Tootja: DELPHI

• Mootorikood: M52 B28 (286S1)
• Ehitusaasta kuni: 03.1998
• Connector Shape: rectangular
• Number of pins: 3
• Supplementary Article/Info 2: with cable
• Tootja: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Ehitusaasta alates: 03.1998
• Ehitusaasta kuni: 07.1998
• Mootorikood: M 52 B 28
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Tootja: SKV

• Guarantee: 3 years guarantee
• Weight [kg]: 0.02
• Number of pins: 2
• Always compare old and new part (in particular OE No.):
• Tootja: SKV GERMANY
• Nimetus: CE 17SKV706

• Number of connectors: 3
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Nimetus: SW 33 10 9727
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• vajaminev tükihulk: 1
• Ehitusaasta kuni: 03.1998
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Tootja: BREMI

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.13
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Nimetus: CE 17SKV236
• Tootja: ESEN SKV

• Ehitusaasta alates: 04.1998
• Number of pins: 3
• Connector Shape: D Shape
• Socket colour: black
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• for OE number: 12141709616
• Tootja: MEAT&DORIA

• Number of connectors: 3
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Colour: black
• Number of pins: 3
• Fitting Depth [mm]: 33
• Weight [kg]: 0.03
• Tootja: ERA

• Mootorikood: M52B28
• Number of pins: 3
• Number of connectors: 3
• Colour: black
• Sensor Type: Hall Sensor, Active sensor
• Supplementary Article/Supplementary Info: with holder
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 33
• Supplementary Article/Info 2: without cable
• Connector Shape: D Shape
• Number of mounting bores: 1
• Mounting Angle [degrees]: 90
• Tootja: VIEROL

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Ehitusaasta kuni: 03.1998
• Voltage [V]: 12
• Cable Length [mm]: 785
• Sensor Type: Hall Sensor
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Tootja: HELLA
• Nimetus: HE 6PU009110001

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Mootorikood: M52 B28 (286S1)
• Ehitusaasta alates: 03.1998
• Connector Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Tootja: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Ehitusaasta alates: 04.1998
• Voltage [V]: 12
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Assy./disassy. by qualified personnel required!:
• Tootja: HELLA
• Nimetus: HE 6PU012680011

Brief Information: *** HELLA Electronics OE competence for over 60 years.

Tootja: MAGNETI MARELLI

• Mootorikood: M52 B28 (286S1)
• Ehitusaasta alates: 09.1998
• Number of pins: 3
• Connector Shape: D Shape
• Supplementary Article/Info 2: with seal ring
• Number of mounting bores: 3
• Housing Type: Aluminium Housing
• Housing material: Plastic, Polyamid 6.6
• Housing Colour: black
• Observe system fill quantity:
• Tootja: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Mootorikood: M52B28
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• Tootja: VALEO

• Guarantee: 3 years guarantee
• Weight [kg]: 0.18
• Always compare old and new part (in particular OE No.):
• Tootja: SKV GERMANY

• Cable Length [mm]: 780
• for OE number: 12 14 1 703 277
• Number of pins: 3
• Sensor Type: Hall Sensor, Active sensor
• Number of connectors: 3
• Length [mm]: 815
• Colour: black
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: with cable
• Connector Shape: rectangular
• Resistor [kOhm]: 18
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mootorikood: M52 B28 (286S1)
• Ehitusaasta alates: 03.1998
• Tootja: EPS

• Length [mm]: 111
• Number of connectors: 3
• Weight [kg]: 0.091
• Supplementary Article/Supplementary Info: with gasket/seal
• Observe service information:
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: M52 B28 (286S1)
• Ehitusaasta kuni: 03.1998
• Cable Length [mm]: 780
• Tolerance [%]: +15, -5
• Number of pins: 3
• Colour: black
• Tootja: VDO

• Length [mm]: 111
• Number of connectors: 3
• Weight [kg]: 0.092
• Supplementary Article/Supplementary Info: with gasket/seal
• Observe service information:
• Tootja: BLUE PRINT ELEKTRYKA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.