• Fitting Position: Front Axle Left, Front Axle Right
• Tootja: JP GROUP
• Lisainfo: Protective Cap/Bellow, shock absorber

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Tootja: JP GROUP
• Lisainfo: Shock Absorber

• Fitting Position: Front Axle
• Height [mm]: 206
• Tootja: MAX
• Lisainfo: 72-2185

Nimetus: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. A2/A3/GOLF

• Fitting Position: Front Axle
• Bellows Material: Thermoplast
• Tootja: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty. Nimetus: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. A2/A3/GOLF

• Hulk: 2
• Installatsiooni pool: Tagasild
• Üldine informatsioon: protective pipe; rear
• Tootja: VIKA

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle both sides
• Length [mm]: 205
• Weight [kg]: 0.065
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• mitte PR-numbrile: 1JH
• Width [mm]: 59
• Thickness [mm]: 180
• Material: PP (Polypropylene)
• Fitting Position: Rear Axle
• Weight [kg]: 0.032
• Nimetus: SW 30 92 2142
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• mitte PR-numbrile: 1JH
• Width [mm]: 59
• Thickness [mm]: 180
• Material: PP (Polypropylene)
• Fitting Position: Rear Axle
• Weight [kg]: 0.032
• Tootja: FEB
• Lisainfo: F22142

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Nimetus: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW T. PASSAT 05-/TIGUAN/TOURAN/SUPERB 08-

• Mounting Type: Rubber Mount
• Fitting Position: Front Axle
• Height [mm]: 206
• for OE number: 6N0413175A
• Tootja: SASIC

• Hulk: 2
• Installatsiooni pool: Esisild
• Materjal: Termoplast
• Kaal (kg): 0,07
• vajaminev tükihulk: 2
• Välisläbimõõt [mm]: 68, 80
• Üldine informatsioon: protective pipe; front
• Tootja: VIKA

Installatsiooni pool: Esisild

• Outer Diameter [mm]: 68, 80
• Material: Thermoplast
• Fitting Position: Front Axle
• Weight [kg]: 0.07
• Nimetus: Kaitsemts/kaitsekumm,amort
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Height [mm]: 206
• replacement in pairs recommended:
• Tootja: MEY

Nimetus: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. A2/A3/GOLF

• Mudeliaasta alates: 2011
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Bottom eye
• Weight [kg]: 0.144
• Packaging length [cm]: 4.2
• Packaging width [cm]: 4.2
• Packaging height [cm]: 3.7
• Tootja: FEBEST

• Fitting Position: Front Axle
• Weight [kg]: 0.108
• Packaging length [cm]: 19
• Packaging width [cm]: 7.8
• Packaging height [cm]: 7.8
• Tootja: FEBEST

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Tootja: ASHIKA

• Installatsiooni pool: Tagasild
• Amorditüüp: Gaasirõhk
• Amort-süsteem: kaks toru
• Amort-kinnitusliik: ülemine tihvt, Silma all
• Amort-Ehitusliik: Teleskoop-amort
• Tootja: JAPKO

• Installatsiooni pool: Tagasild
• Šassii: tugevdatud šassiiga sõidukile
• Varustusaste: BlueMotion
• Amorditüüp: Gaasirõhk
• Amort-süsteem: kaks toru
• Amort-kinnitusliik: ülemine tihvt, Silma all
• Amort-Ehitusliik: Vedruamort
• Tootja: DENCKERMANN AMORTYZATORY

• Šassii: ilma kõrgendatud šassiita sõidukite jaoks
• Installatsiooni pool: Tagasild
• Amorditüüp: Gaasirõhk
• Amort-süsteem: kaks toru
• Amort-kinnitusliik: Silma all, ülemine tihvt
• Amort-Ehitusliik: Teleskoop-amort
• Nimetus: CFD 564779
• Tootja: DACO

• Installatsiooni pool: Tagasild
• Sõidukivarustus: sõidukitele ilma nivooreguleerijata
• soovitava lisavarustuse artiklinumber: MK203, PK137
• Amorditüüp: Gaasirõhk
• Amort-süsteem: kaks toru
• Amort-kinnitusliik: Silma all, ülemine tihvt
• max. pikkus (mm): 593
• Amort-Ehitusliik: vedrukandev amort
• Nimetus: CFD 564773
• Tootja: DACO

Šassii: tavavedrustusega sõidukile, sõidukitele ilma elektr.vedrustusreguleerijata

• Šassii: ilma kõrgendatud šassiita sõidukite jaoks
• Installatsiooni pool: Tagasild
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Teleskoop-amort
• Amort-süsteem: kaks toru
• Amort-kinnitusliik: Silma all, ülemine tihvt
• Tootja: KAVO

• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Damper without Rebound Spring
• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: 72-2504
• Nimetus: AMORT
• Tootja: MAX

• Šassii: ilma kõrgendatud šassiita sõidukite jaoks
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Tootja: JP GROUP
• Lisainfo: Shock Absorber

• Installatsiooni pool: Tagasild, Tagasild paremal, Tagasild vasakul
• Amorditüüp: Gaasirõhk
• Amort-süsteem: kaks toru
• soovitava lisavarustuse artiklinumber: GH-694706
• Amort-Ehitusliik: Teleskoop-amort
• Amort-kinnitusliik: Silma all, ülemine tihvt
• Nimetus: GH 339953
• Tootja: AUTO-GH

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Nimetus: AMORT
• Tootja: JPA

• Installatsiooni pool: Tagasild
• Šassii: tavavedrustusega sõidukile
• Varustusaste: BlueMotion
• mitte varustusvariandile: BlueMotion
• Eriotstarbe-sõid.: mitte kiirabiautodele
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Nimetus: AMORT
• Tootja: MAX
• Lisainfo: MGA-5713

• Installatsiooni pool: Esisild
• Šassii: tavavedrustusega sõidukile
• Shock Absorber Design: Suspension Strut
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Diameter [mm]: 55
• Tootja: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Tootja: KAMOKA AMORTYZATORY
• Lisainfo: 2000377 KAMOKA

• Šassii: ilma kõrgendatud šassiita sõidukite jaoks
• Installatsiooni pool: Esisild
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort
• Amort-süsteem: kaks toru
• Amort-kinnitusliik: ülemine tihvt, Rõngaskinnituse all
• Kolvivarda läbimõõt [mm]: 25
• Nimetus: CFD 454722
• Tootja: DACO

• Installatsiooni pool: Esisild
• Šassii: für Fahrzeuge mit Schlechtwegeausführung
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Tootja: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Tootja: KAMOKA AMORTYZATORY

• Fitting Position: Rear Axle
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Spring Type: for vehicles with coil spring suspension
• Nimetus: MM 4320G
• Tootja: MAGNETI MARELLI

• Šassii: ilma kõrgendatud šassiita sõidukite jaoks
• Amorditüüp: Gaasirõhk
• Installatsiooni pool: Esisild
• Amort-Ehitusliik: Vedruamort
• Amort-kinnitusliik: Plaadi all, ülemine tihvt
• Vedruamort-välisläbimõõt [mm]: 55
• Amort-süsteem: kaks toru
• Nimetus: Gas shock absorber
• Kvaliteediklass: PJ

Lisainfo: "Tootja: SRL
VW/SEAT/AUDI
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Diameter 1/ Diameter 2 [mm]: 25/55
• Article number of recommended accessories: SMA0148
• Shock Absorber Mounting Type: Top pin
• Tootja: ASHIKA

• Šassii: für Fahrzeuge mit Schlechtwegeausführung
• OE-numbri kontrollimine:
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Weight [kg]: 2.49
• Shock Absorber Design: Telescopic Shock Absorber
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: Tagasild
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Diameter [mm]: 39
• Length 1 [mm]: 585
• Length 2 [mm]: 348
• Piston Rod Diameter [mm]: 12
• Quantity per axle: 1
• Observe technical data:
• Tootja: TRW

PR-numbri jaoks: 1JA, 1JC, 1JG, 1JK, 1JL, 1JR, UA0, UA1, UA5, UA6, UC5 SVHC: No information available, please contact the manufacturer!

• Šassii: tavavedrustusega sõidukile
• OE-numbri kontrollimine:
• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Nimetus: AMORT
• Tootja: MAX

OE-numbri jaoks: 3C0413031A, 3C0413031AA, 3C0413031AB, 3C0413031AH, 3C0413031AJ, 3C0413031AQ, 3C0413031AS, 3C0413031E, 3C0413031L, JZW413031A

• Installatsiooni pool: Esisild
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort
• Amort-süsteem: kaks toru
• Läbimõõt 1/Läbimõõt 2 (mm): 25/55
• soovitava lisavarustuse artiklinumber: SMJ0148
• Amort-kinnitusliik: ülemine tihvt
• Tootja: JAPKO
• Lisainfo: MJ00031 JAPKO

• Šassii: ilma kõrgendatud šassiita sõidukite jaoks
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Nimetus: AMORT
• Tootja: KYB
• Lisainfo: 344459

• soovitava lisavarustuse artiklinumber: 100 513 0012
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• replacement in pairs recommended:
• Nimetus: AMORT
• Tootja: MEY
• Lisainfo: 1267250024

• Amorditüüp: Gaasirõhk
• Installatsiooni pool: Esisild
• Amort-Ehitusliik: Vedruamort
• Amort-kinnitusliik: Plaadi all, ülemine tihvt
• Vedruamort-välisläbimõõt [mm]: 55
• Amort-süsteem: kaks toru
• Kvaliteediklass: PJ
• Nimetus: Gas shock absorber

Šassii: sõidukitele ilma elektr.vedrustusreguleerijata, tavavedrustusega sõidukile

• Installatsiooni pool: Tagasild
• soovitava lisavarustuse artiklinumber: PK137
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Weight [kg]: 1.7
• Bore Ø [mm]: 30
• Length 1 [mm]: 370
• Length 2 [mm]: 593
• Piston Rod Diameter [mm]: 12.4, 13
• Observe service information:
• Article number of recommended accessories: MK203, PK078
• Packaging length [cm]: 50.5
• Packaging width [cm]: 6.4
• Packaging height [cm]: 6.4
• Tootja: MONROE

Warranty: 5 years warranty with accessories when replaced in pairs

• Installatsiooni pool: Esisild
• Šassii: für Fahrzeuge mit Schlechtwegeausführung
• Amort-Ehitusliik: Vedruamort
• Amort-süsteem: kaks toru
• Amorditüüp: Gaasirõhk
• Korpuseläbimõõt (mm): 55
• Amort-kinnitusliik: Tihvti all
• Tootja: DENCKERMANN AMORTYZATORY

OE-numbri jaoks: 3C0 413 031 AH, 3C0 413 031 AJ, 3C0 413 031 AQ, 3C0 413 031 AS, JZW 413 031 A

• Installatsiooni pool: Esisild, esisild paremal, esisild vasakul
• Amorditüüp: Gaasirõhk
• Amort-süsteem: kaks toru
• soovitava lisavarustuse artiklinumber: GH-692207
• Amort-Ehitusliik: Teleskoop-amort
• Amort-kinnitusliik: ülemine tihvt, Rõngaskinnituse all
• Vedruamort-välisläbimõõt [mm]: 55
• Tootja: AUTO-GH

• PR-numbri jaoks: G02
• Installatsiooni pool: Esisild
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Diameter [mm]: 54
• Length 1 [mm]: 560
• Length 2 [mm]: 367
• Piston Rod Diameter [mm]: 24
• Quantity per axle: 1
• Observe technical data:
• Tootja: TRW

SVHC: No information available, please contact the manufacturer!

• PR-numbri jaoks: 1JB, 1JG
• Šassii: tugevdatud šassiiga sõidukile
• Installatsiooni pool: Tagasild
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Diameter [mm]: 39
• Length 1 [mm]: 586
• Length 2 [mm]: 374
• Piston Rod Diameter [mm]: 12
• Quantity per axle: 1
• Observe technical data:
• Tootja: TRW
• Lisainfo: JGT1054T

SVHC: No information available, please contact the manufacturer!

• Šassii: sportvedrustusega sõidukile
• PR-numbri jaoks: G03, G23
• Installatsiooni pool: Esisild
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Diameter [mm]: 54
• Length 1 [mm]: 367
• Length 2 [mm]: 560
• Piston Rod Diameter [mm]: 24
• Quantity per axle: 1
• Observe technical data:
• Tootja: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Diameter 1/ Diameter 2 [mm]: 25/55
• Article number of recommended accessories: SM0148
• Shock Absorber Mounting Type: Top pin
• Nimetus: AMORT
• Tootja: JPA

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Article number of recommended accessories: 100 412 2039, 100 412 2039/S, 100 640 0007
• replacement in pairs recommended:
• Nimetus: AMORT
• Tootja: MEY

• Installatsiooni pool: Tagasild
• Šassii: tavavedrustusega sõidukile
• Sõidukivarustus: tarbesõidukite kinnitusega sõidukitele
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: TT30/13X212A
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Tootja: SACHS

SVHC: No information available, please contact the manufacturer!

• Installatsiooni pool: Esisild
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 4
• Bore Ø [mm]: 32
• Observe technical data:
• Length 1 [mm]: 391
• Length 2 [mm]: 553
• Piston Rod Diameter [mm]: 22
• Article number of recommended accessories: MK194, PK163
• Packaging length [cm]: 51.5
• Packaging width [cm]: 16.2
• Packaging height [cm]: 16.2
• Housing Diameter in Clamping Area [mm]: 55
• Tootja: MONROE

Warranty: 5 years warranty with accessories when replaced in pairs

• Šassii: ilma kõrgendatud šassiita sõidukite jaoks
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Suspension Strut Outer Diameter [mm]: 55
• Piston Rod Diameter [mm]: 25
• Nimetus: AMORT
• Tootja: KYB
• Lisainfo: KYB335808

Technical Information: Please refer to the technical drawing in "Documents"

• Šassii: ilma sportvedrustuseta sõidukitele
• Fitting Position: Front Axle Left, Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut, Spring-bearing Damper
• Replace in pairs only:
• Shock Absorber Mounting Type: Top pin
• Tootja: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: Tagasild
• Šassii: tugevdatud šassiiga sõidukile
• Varustusaste: BlueMotion
• Shock Absorber Design: Telescopic Shock Absorber
• Parameter: SEOV30/13X222A
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Nimetus: AMORT
• Tootja: SAA

SVHC: No information available, please contact the manufacturer!

• Installatsiooni pool: Esisild
• Šassii: für Fahrzeuge mit Schlechtwegeausführung
• OE-numbri kontrollimine:
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SFE36/25X157A
• Housing Diameter [mm]: 55
• Shock Absorber Mounting Type: Top pin
• Nimetus: AMORT
• Tootja: SAA

OE-numbri jaoks: 3C0 413 031 A, 3C0 413 031 AA, 3C0 413 031 AB, 3C0 413 031 AH, 3C0 413 031 AJ, 3C0 413 031 AQ, 3C0 413 031 AS, 3C0 413 031 E, 3C0 413 031 L, JZW 413 031 A SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Vehicle Equipment: for vehicles without leveling control
• Shock Absorber System: Twin-Tube
• Nimetus: AMORT
• Tootja: BIL

Šassii: tavavedrustusega sõidukile, sõidukitele ilma elektr.vedrustusreguleerijata Lisainfo: "Tootja: BILSTEIN
SKODA/VW
(kvaliteediklass: Q)"

• Installatsiooni pool: Esisild
• Šassii: kõrgendatud šassiiga sõidukite jaoks
• PR-numbri jaoks: G50, G52
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SFE36/25X164A
• Housing Diameter [mm]: 55
• Shock Absorber Mounting Type: Top pin
• Nimetus: Amort
• Tootja: SAA

OE-numbri jaoks: 1T0 413 031 CB, 1T0 413 031 CC, 1T0 413 031 CS, 1T0 413 031 DT, 1T0 413 031 EG, 1T0 413 031 EH, 1T0 413 031 FA, 1T0 413 031 FB, 1T0 413 031 FK, 1T0 413 031 FL, 1T0 413 031 GK, 1T0 413 031 HH, 1T0 413 031 HJ, 1T0 413 031 HK, 1T0 413 031 HL, 1T0 413 031 HM, 1T0 413 031 HN, 1T0 413 031 HP, 1T0 413 031 JA, 1T0 413 031 Q, 2K5 413 031, 3AA 413 031 A, 3AA 413 031 B, 3AA 413 031 F, 3AA 413 031 G, 3AA 413 031 H, 3AA 413 031 J, 3AA 413 031 M, 3C0 413 031 AE, 3C0 413 031 AT, 5C0 413 031 BE, 5C0 413 031 CS, 5C0 413 031 DE, 5C0 413 031 K, 5C0 413 031 P, 5C0 413 031 Q, 5C0 413 031 R SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Vehicle Equipment: for vehicles without leveling control
• Shock Absorber System: Twin-Tube
• Nimetus: AMORT
• Tootja: BIL
• Kvaliteediklass: Q

Šassii: sportvedrustusega sõidukile, sõidukitele ilma elektr.vedrustusreguleerijata Lisainfo: "Tootja: BILSTEIN
SKODA/VW
(kvaliteediklass: Q)"

• Housing Diameter [mm]: 55
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• General Information: gas-filled shock absorber; front
• Tootja: BORSEHUNG

• Hulk: 2
• Amort-Ehitusliik: Teleskoop-amort
• Amorditüüp: Gaasirõhk
• Installatsiooni pool: Esisild
• Amort-kinnitusliik: ülemine tihvt, Rõngaskinnituse all
• Üldine informatsioon: shock absorber; front; gas
• Tootja: VIKA

• Installatsiooni pool: Esisild
• Šassii: sportvedrustusega sõidukile
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SFE36/25X164A
• Shock Absorber Mounting Type: Top pin
• Nimetus: Amort
• Tootja: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Suspension Strut Outer Diameter [mm]: 55
• Shock Absorber System: Twin-Tube
• Nimetus: AMORT
• Tootja: BIL

Šassii: tavavedrustusega sõidukile, sõidukitele ilma elektr.vedrustusreguleerijata Lisainfo: "Tootja: BILSTEINVW PASSAT 05->(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Suspension Strut Outer Diameter [mm]: 55
• Shock Absorber System: Twin-Tube
• Nimetus: AMORT
• Tootja: BIL

Šassii: sportvedrustusega sõidukile, sõidukitele ilma elektr.vedrustusreguleerijata Lisainfo: "Tootja: BILSTEIN
VW PASSAT 05-
(kvaliteediklass: Q)"

• Šassii: ilma kõrgendatud šassiita sõidukite jaoks
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Nimetus: AMORT
• Tootja: KYB

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Weight [kg]: 4.1
• Packaging length [cm]: 22
• Packaging width [cm]: 22
• Packaging height [cm]: 41
• Tootja: FEBEST

• Šassii: ilma kõrgendatud šassiita sõidukite jaoks
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Suspension Strut Outer Diameter [mm]: 55
• Piston Rod Diameter [mm]: 25
• Nimetus: AMORT
• Tootja: KYB

Technical Information: Please refer to the technical drawing in "Documents"

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Vehicle Equipment: for vehicles without leveling control
• Shock Absorber System: Monotube
• Nimetus: AMORT
• Tootja: BIL
• Kvaliteediklass: Q

Šassii: sportvedrustusega sõidukile, sõidukitele ilma elektr.vedrustusreguleerijata Lisainfo: "Tootja: BILSTEIN
AUDI/SEAT/VW
(kvaliteediklass: Q)"

• Šassii: sõidukitele ilma elektr.vedrustusreguleerijata
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Suspension Strut Outer Diameter [mm]: 55
• Shock Absorber System: Single Tube Upside Down
• Nimetus: AMORT
• Tootja: BIL
• Kvaliteediklass: Q

Lisainfo: "Tootja: BILSTEIN
PASSAT VI SDN/KOMBI
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Suspension Strut Outer Diameter [mm]: 55
• Shock Absorber System: Single Tube Upside Down
• Nimetus: AMORT
• Tootja: BIL

Šassii: sportvedrustusega sõidukile, sõidukitele ilma elektr.vedrustusreguleerijata Lisainfo: "Tootja: BILSTEIN
PASSAT VI SDN/KOMBI
(kvaliteediklass: Q)"

• Installatsiooni pool: Tagasild, vasakul
• Šassii: Elektr.vedrustusregul. sõidukitele
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Electronically adjustable shock strength
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Weight [kg]: 1.4
• Operating Mode: Electronic
• Warranty: 5 years warranty
• paired article number: C1514R
• Packaging length [cm]: 69.6
• Packaging width [cm]: 13.3
• Packaging height [cm]: 13.6
• Nimetus: Amort
• Tootja: MON