• Värvimarkeering: hall
• Pistikkontaktide arv: 2
• Tootja: JP GROUP
• Lisainfo: Sender for water temperature gauge, 2 pins

• Piirangutega toode/piirangu info 2: koos pistikuga
• Juhtmete arv (paranduskomplekt, kaablikomplekt): 2
• Ühendushulk: 2
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Tootja: ABAKUS LORO
• Nimetus: AB 120-00-187

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Kaal (kg): 0,015
• Ühenduste arv: 2
• Kruvipikkus kruvipea all [mm]: 20
• Värv: must
• Värvimarkeering: hall
• Üldine informatsioon: Coolant temperature sensor; black
• Tootja: VIKA

• Üldine informatsioon: Exterior temperature sensor
• Tootja: VIKA

• Pistikukatte kuju: ovaalne, D-kuju
• Värvimarkeering: hall
• Anduritüüp: NTC-andur
• Pistikkontaktide arv: 2
• soovitatav remondilaiendus, vaata lisavarustuse nimekirja:
• Tootja: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: D Shape
• Number of pins: 2
• for OE number: 06A919501
• Supplementary Article/Info 2: with mounting parts
• Tootja: NRF

• Keermemõõt: 20 mm
• Pins'ide arv: 2
• Tootja: VERNET
• Lisainfo: WS2607

• Üldine informatsioon: Fuel temperature sensor
• Tootja: VIKA

• Mootorikood: CSLC
• Värv: hall
• Plokieraldus:
• Värvimarkeering: hall
• tootekoodile: 1.660.015K, 1.830.278K, 1.879.946
• Nimetus: EP 1.830.278
• Tootja: EPS
• Lisainfo: 1-830-278

• Mootorikood: CSLC
• Värv: hall
• Plokieraldus:
• Värvimarkeering: hall
• tootekoodile: 26.0015K, 7.3278K, 7.7946
• Tootja: FACET

• Keermemõõt: M20
• Pistikkontaktide arv: 2
• Korpusevärv: hall
• Pistikukatte kuju: ovaalne
• Tootja: ERA

• OE-numbri jaoks: 007 542 1318
• Ühenduste arv: 2
• Tootja: TRUCKTEC

• Versioon: 2
• Pistikkontaktide arv: 2
• Kaal (kg): 0,3
• pakendi pikkus [cm]: 12
• pakendi laius [cm]: 8
• pakendi kõrgus [cm]: 6

• Korpusevärv: hall
• Pistikkontaktide arv: 2
• Võtmekaugus: 0
• Tootja: DELPHI
• Nimetus: DE TS10278

• Montaaživiis: pistetud
• Pinge [V]: 12
• Piirangutega toode/piirangu info: koos tihendiga
• Värv: must
• Anduritüüp: NTC-andur
• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info 2: koos turvarõngaga
• Vastab originaalosa värvile: must, hall
• Installatsiooni sügavus (mm): 20
• Monteerimist/demonteerimist peab tegema spetsialist!:
• SVHC: 7439-92-1; plii
• Nimetus: HE 6PT009309331
• Tootja: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Tootmise kuupäev alates: 03.01.2012
• Pistikkontaktide arv: 2
• Pistikukatte kuju: ovaalne
• Korpuse materjal: Plastik
• Piirangutega toode/piirangu info 2: ilma kaablita
• Korpusevärv: must
• pikkus üle kõige (mm): 88,5
• Lüliti funktsioon: Reed-lüliti
• Tootja: TOPRAN

kombineeritud PR-numbrile: 0WC+1AC, 0WL+1AC, 0WC+1AN, 0WL+1AN, 0WC+1AS, 0WC+1AT, 0WL+1AS, 0WL+1AT Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Kruvipikkus kruvipea all [mm]: 20
• Kaal (kg): 0,015
• Ühenduste arv: 2
• Värvimarkeering: hall
• Üldine informatsioon: Coolant temperature sensor; 2 pin; black; grey
• Tootja: BORSEHUNG

• Versioon: 2
• Connector Shape: D Shape
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Tootja: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

Tootja: METZGER

• Pistikkontaktide arv: 3
• Anduritüüp: Hallsensor
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Tootja: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Pistikkontaktide arv: 2
• Korpusevärv: hall
• Tootja: FAE

• Kaal (kg): 0,02
• Laius (mm): 31
• Ühenduste arv: 3
• Pikkus (mm): 69
• Värv: must
• Piirangutega toode/piirangu info 2: koos kruviga
• vajaminev tükihulk: 1
• Üldine informatsioon: Crankshaft position sensor; black
• Tootja: VIKA

• Pistikkontaktide arv: 3
• Garantii: 3 aastat garantii
• Kaal (kg): 0,03
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY
• Nimetus: CE 17SKV507

• Ühenduste arv: 2
• Värv: must
• Kaal (kg): 0,01
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• OE-numbri jaoks: 059 919 523 A
• Tootja: FEBI
• Lisainfo: FE106318

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Ühenduste arv: 2
• Värv: must
• Kaal (kg): 0,01
• OE-numbri jaoks: 059 919 523 A
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: SW 30 10 6318
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Kõrgus (mm): 20
• Anduritüüp: Hallsensor
• Ühenduste arv: 3
• Tootja: VERNET

• Kaal (kg): 0,02
• Laius (mm): 31
• Ühenduste arv: 3
• Pikkus (mm): 69
• Värv: hall
• Piirangutega toode/piirangu info 2: koos kruviga
• vajaminev tükihulk: 1
• Üldine informatsioon: Crankshaft position sensor
• Tootja: VIKA

• Mootorikood: CSLC
• Nimetus: EP 1.953.598
• Tootja: EPS

• Mootorikood: CSLC
• Tootja: FACET

• Läbimõõt [mm]: 26
• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Vedrukuju: Kinnitusvedru
• Pikkus (mm): 20
• Korpusevärv: sinine
• Kõrgus (mm): 57
• Värv: hall
• Ühenduste arv: 2
• Tootja: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Garantii: 3 aastat garantii
• Kaal (kg): 0,01
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY

• vajaminev tükihulk: 1
• Pinge [V]: 12
• Pistikkontaktide arv: 3
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info 2: ilma kaablita
• Korpusevärv: hall
• Tootja: BREMI

• Anduritüüp: Hallsensor
• valikuliselt:
• Pistikkontaktide arv: 3
• Installatsiooni sügavus (mm): 19,5
• Pistikukatte kuju: D-kuju
• alternatiivne remondikomplekt: 550479
• Nominaalpinge (V): 12
• Tootja: ERA

• Pistikkontaktide arv: 3
• Tootja: DELPHI
• Nimetus: DE SS11170

• Kõrgus (mm): 88,6
• Piirangutega toode/piirangu info: koos tihendiga
• Pinge [V]: 8
• Nimivõimsus [W]: 0,25
• Ühenduste arv: 2
• Korpusevärv: must
• Pistikute teostus: Lamepistik
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Nimetus: HE 6PR007968011
• Tootja: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Pistikukatte kuju: D-kuju
• Tootja: FAE

• Sõidukivarustus: start-stopp-funktsioonita sõidukitele
• Ühenduste arv: 3
• Kinnitusaukude hulk: 1
• Nominaalpinge (V): 12
• lisaks vajatav toode (tootekood): bolt
• Töötemperatuur alates [°C]: −40
• Töötemperatuur kuni [°C]: 125
• Anduritüüp: Hallsensor
• Pistikukatte kuju: D-kuju
• Värv: hall/must
• Nimetus: SN CKP154.01
• Tootja: SNR

Kerenumber (VIN): [3C-8-150 001;], [5P-7-031 001;], [5Z-60050001;], [5Z-64196001;], [6L-7-098 501;], [6Y-74099348;]

• OE-numbri jaoks: 03C 906 433 E
• Laius (mm): 30
• Kõrgus (mm): 28
• Pikkus (mm): 80
• Pistikkontaktide arv: 3
• vajaminev tükihulk: 1
• Anduritüüp: Hallsensor
• Ühenduste arv: 3
• Nominaalpinge (V): 12
• Installatsiooni sügavus (mm): 20
• Piirangutega toode/piirangu info 2: koos kruviga, ilma kaablita
• Pistikukatte kuju: D-kuju
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pistikkontaktide arv: 3
• Anduritüüp: Hallsensor
• Pistikukatte kuju: D-kuju
• Tootja: VDO

• Installatsiooni sügavus (mm): 20
• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Piirangutega toode/piirangu info 2: koos kruviga
• Monteerimist/demonteerimist peab tegema spetsialist!:
• SVHC: 7439-92-1; plii, 872-50-4; 1-Methyl-2-pyrrolidone
• Nimetus: HE 6PU009167131
• Tootja: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Pistikkontaktide arv: 3
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Seerianumber: EPO-AU-012
• Pistikkontaktide arv: 3
• Kinnitusaukude hulk: 3
• Pistikukatte kuju: D-kuju
• Piirangutega toode/piirangu info 2: koos rõngastihendiga

• Mootorikood: CSLC
• Käigukasti liik: Käigukast
• Nimetus: EP 1.953.438
• Tootja: EPS

• Mootorikood: CSLC
• Käigukasti liik: Käigukast
• Tootja: FACET

Tootja: BOSCH

• Pistikkontaktide arv: 3
• OE-numbri jaoks: 07P907660
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Tootja: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Mootorikood: CSLC
• Heitgaaside normatiiv: Euro 3/Euro 4/Euro 5
• PR-numbri jaoks: 0GE, 0GG, 0GQ, 7GG, 7GQ, 7MF, 7MJ, 7MQ
• Pikkus, mõõteandur [mm]: 115,3
• Tootja: FACET

• Heitgaaside normatiiv: Euro 3/Euro 4/Euro 5
• PR-numbri jaoks: 0GE, 0GG, 0GQ, 7GG, 7GQ, 7MF, 7MJ, 7MQ
• Sõidukitüüp: Crafter 30
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 3
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Nimetus: HE 6PR013680101
• Tootja: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Heitgaaside normatiiv: Euro 6
• PR-numbri jaoks: 7MM, 7MP
• Sõidukitüüp: Crafter 30
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 3
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Tootja: HELLA ELEKTRYKA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Mootorikood: CSLC
• Heitgaaside normatiiv: Euro 6
• PR-numbri jaoks: 7MM, 7MP
• Pikkus, mõõteandur [mm]: 146
• Tootja: EPS