• vasak/paremroolimine: vasakpoolse roolimise jaoks
• Observe system fill quantity:
• Hose Type: Moulded Hose
• Cooling Hose: from water pipe to water pump
• Material: Rubber with fabric lining
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Jahutustorustik: veetorust veepumpa
• Installatsiooni pool: all
• Tootja: DELLO AUTOMEGA

• Cooling Hose: from waterpump to connecting pipe
• Weight [kg]: 0.042
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Cooling Hose: from engine to water pipe
• Lisainfo: Radiator hose, engine block to water pipe

• Materjal: Kumm
• Üldine informatsioon: coolant hose; rubber
• Tootja: VIKA

• Observe system fill quantity:
• Hose Type: Moulded Hose
• Cooling Hose: from oil cooler to water pipe
• Material: Rubber with fabric lining
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Cooling Hose: from oil cooler to water pipe
• Lisainfo: Radiator hose, water pipe to oil cooler

• vasak/paremroolimine: vasakpoolse roolimise jaoks
• Material: Rubber with fabric lining
• Cooling Hose: from water pipe to water pump
• Nimetus: JAHUTUSVOOLIK
• Tootja: MAX

• Materjal: EPDM (Etüleen-Propüleen-Dieen-Kautsuk)
• Siseläbimõõt 1 [mm]: 16
• Siseläbimõõt 2 (mm): 16
• Garantii: 3 aastat garantii
• Kaal (kg): 0,08
• Värv: must
• vooliku pikkus [mm]: 163
• sobiv sõidukitüübi jaoks: Sõiduauto
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY
• Nimetus: CE 24SKV366

• Material: Rubber with fabric lining
• Cooling Hose: from oil cooler to water pipe
• Nimetus: JAHUTUSVOOLIK
• Tootja: MAX

• Pikkus (mm): 113
• Siseläbimõõt [mm]: 18
• Jahutustorustik: veepumbast veetorusse
• Garantii: 3 aastat garantii
• Kaal (kg): 0,06
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY

• Cooling Hose: from engine to oil cooler
• Lisainfo: Radiator hose, water flange to oil cooler

• Sõidukivarustus: sõidukitele ilma kliimaautomaadita
• Cooling Hose: from coolant regulator housing to heat exchanger
• Forward- /Backflow: for foreflow
• Hose Type: Moulded Hose
• Nimetus: JAHUTUSVOOLIK
• Tootja: HAN

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Käigukasti liik: Käigukast
• Cooling Hose: from expansion tank to water pipe
• Lisainfo: Radiator hose, expansion tank to water pipe

• Kerenumber (VIN) alates: 31-J-000 001
• Sõidukivarustus: Kliimaseadmega sõidukile
• Tootja: DELLO AUTOMEGA

• Kerenumber (VIN) alates: 31-J-000 001
• Cooling Hose: from thermostat to waterpump
• Tootja: DELLO AUTOMEGA

• Observe system fill quantity:
• Hose Type: Moulded Hose
• Cooling Hose: from engine to water pump
• Material: Rubber with fabric lining
• Nimetus: JAHUTUSVOOLIK
• Tootja: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Observe system fill quantity:
• Hose Type: Moulded Hose
• Cooling Hose: Engine to Oil Cooler
• Material: Rubber with fabric lining
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Cooling Hose: from heat exchanger to water pipe
• Forward- /Backflow: for backflow
• Lisainfo: Radiator hose, return, heat exchanger to engine

• Käigukasti liik: Käigukast
• Fitting Position: Lower
• Observe system fill quantity:
• Hose Type: Moulded Hose
• Cooling Hose: from expansion tank to water pipe
• Material: Rubber with fabric lining
• Nimetus: JAHUTUSVOOLIK
• Tootja: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Inner Diameter [mm]: 18
• Cooling Hose: from water pump to water pipe
• Hose Length [mm]: 113
• Weight [kg]: 0.041
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Üldine informatsioon: coolant hose
• Tootja: VIKA

• Sõidukivarustus: Sõidukitele koos haakeseadmega
• Käigukasti liik: Automaatkäigukast
• Kliimatsoonid: kuuma kliimavööndi jaoks
• Cooling Hose: from engine cooler to water pump
• Tootja: DELLO AUTOMEGA

• Cooling Hose: from engine to water pump
• Lisainfo: Radiator hose, water pump to engine

• Cooling Hose: from engine cooler to water pump
• Lisainfo: Radiator hose, lower

• Material: Rubber with fabric lining
• Cooling Hose: from engine to water pump
• Nimetus: JAHUTUSVOOLIK
• Tootja: MAX

• Pikkus (mm): 420
• Jahutustorustik: mootorist kütteradiaatorisse
• Garantii: 3 aastat garantii
• Kaal (kg): 0,18
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Nimetus: CE 43SKV710
• Tootja: ESEN SKV

• Jahutustorustik: veetorust veepumpa
• Sisend-/väljundite arv: 2
• Materjal: EPDM (Etüleen-Propüleen-Dieen-Kautsuk)
• Tootja: METZGER

• Materjal: EPDM (Etüleen-Propüleen-Dieen-Kautsuk)
• Siseläbimõõt 1 [mm]: 19
• Siseläbimõõt 2 (mm): 24
• Garantii: 3 aastat garantii
• Kaal (kg): 0,24
• Värv: must
• vooliku pikkus [mm]: 516
• sobiv sõidukitüübi jaoks: Sõiduauto
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Nimetus: CE 24SKV370
• Tootja: ESEN SKV

• Piduri-/sõidudünaamika: sõidukitele ilma ABS
• Forward- /Backflow: for foreflow
• Nimetus: JAHUTUSVOOLIK
• Tootja: MAX

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• Fitting Position: Lower
• for OE number: 357 121 051B
• Observe system fill quantity:
• Hose Type: Moulded Hose
• Cooling Hose: from engine cooler to water pump
• Material: Rubber with fabric lining
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Ehitusaasta kuni: 07.1990
• Jahutustorustik: Mootor pärast soojendusradiaatorit
• Forward- /Backflow: for foreflow
• Lisainfo: Radiator hose, feed, heat exchanger to engine

• Ehitusaasta kuni: 12.1991
• Cooling Hose: from engine to oil cooler
• Supplementary Article/Info 2: without clamps
• Nimetus: JAHUTUSVOOLIK
• Tootja: MEY

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• Sõidukivarustus: Kliimaautomaatikaga sõidukile
• Cooling Hose: from engine to heat exchanger
• Forward- /Backflow: for foreflow
• Overall Length [mm]: 460
• Hose Type: Moulded Hose
• Nimetus: JAHUTUSVOOLIK
• Tootja: HAN

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Lower
• for OE number: 357 121 051A
• Observe system fill quantity:
• Hose Type: Moulded Hose
• Cooling Hose: from engine cooler to water pump
• Material: Rubber with fabric lining
• Nimetus: JAHUTUSVOOLIK
• Tootja: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Length [mm]: 420
• Cooling Hose: from engine to heat exchanger
• Nimetus: Jahutusvoolik
• Tootja: MAX

• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Cooling Hose: from engine to heat exchanger
• Hose Length [mm]: 420
• Weight [kg]: 0.17
• Nimetus: JAHUTUSVOOLIK
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Cooling Hose: from engine to water pipe
• Supplementary Article/Info 2: without clamps
• Nimetus: JAHUTUSVOOLIK
• Tootja: MEY

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• for OE number: 026121053G
• Weight [g]: 171
• Cooling Hose: from thermostat to waterpump
• Length [mm]: 320
• Inner Diameter 1 [mm]: 25
• Inner Diameter 2 [mm]: 24
• Nimetus: IM 220635
• Tootja: ORIGINAL IMPERIUM

• Ehitusaasta kuni: 07.1990
• Installatsiooni pool: all
• Sõidukivarustus: sõidukitele ilma kliimaseadmeta
• Küte/Jahutus: tavajahutusega sõidukile
• Eriotstarbe-sõid.: mitte taksodele
• Kütuseliik: Bensiin
• Lõikemarkeering: (D)
• Colour: black
• Hose Length [mm]: 335
• Inner Diameter 1 [mm]: 30
• Inner Diameter 2 [mm]: 30
• Observe broschure:
• Tootja: GATES-PRZEWODY

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• Jahutustorustik: Soojendusradiaatorist mootorisse
• for OE number: 191819373
• Weight [g]: 135
• Length [mm]: 287
• Inner Diameter 1 [mm]: 19
• Inner Diameter 2 [mm]: 19
• Nimetus: IM 220742
• Tootja: ORIGINAL IMPERIUM

• Cooling Hose: from engine to water pump
• Supplementary Article/Info 2: without clamps
• Nimetus: JAHUTUSVOOLIK
• Tootja: MEY

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• for OE number: 1H0819371
• Weight [g]: 223
• Cooling Hose: from distributor to heat exchanger
• Length [mm]: 433
• Inner Diameter 1 [mm]: 24
• Inner Diameter 2 [mm]: 19
• Nimetus: IM 221114
• Tootja: ORIGINAL IMPERIUM

• Sõidukivarustus: Sõidukitele koos haakeseadmega
• Käigukasti liik: Automaatkäigukast
• Plokieraldus:
• Kliimatsoonid: kuuma kliimavööndi jaoks
• Fitting Position: Upper
• Number of inlets/outlets: 3
• Observe system fill quantity:
• Hose Type: Moulded Hose
• Material: Rubber with fabric lining
• Nimetus: JAHUTUSVOOLIK
• Tootja: HAN

Cooling Hose: from engine cooler to expansion tank, from engine to engine cooler General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

Tootja: DELLO AUTOMEGA

• Fitting Position: Upper
• Supplementary Article/Info 2: without clamps
• Nimetus: JAHUTUSVOOLIK
• Tootja: MEY

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• Tootja: JP GROUP
• Lisainfo: Water pipe

• Materjal: EPDM (Etüleen-Propüleen-Dieen-Kautsuk)
• Siseläbimõõt 1 [mm]: 31
• Siseläbimõõt 2 (mm): 31
• Garantii: 3 aastat garantii
• Kaal (kg): 0,64
• Värv: must
• vooliku pikkus [mm]: 498
• sobiv sõidukitüübi jaoks: Sõiduauto
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Nimetus: CE 24SKV382
• Tootja: ESEN SKV

• Kaal (kg): 0,43
• vajaminev tükihulk: 1
• Üldine informatsioon: coolant pipe; iron
• Tootja: VIKA

• Sõidukivarustus: Sõidukitele koos haakeseadmega
• Kliimatsoonid: kuuma kliimavööndi jaoks
• Tootja: JP GROUP

Cooling Hose: from engine cooler to expansion tank, from engine to engine cooler Lisainfo: Radiator hose, upper, radiator to water flange and expansion tank

• Material: Steel Pipe
• Number of inlets/outlets: 4
• Consult accessories list for recommended additional repairs:
• Nimetus: JAHUTUSVEDELIKU TORUSTIK
• Tootja: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Ehitusaasta kuni: 07.1991
• Fitting Position: Upper
• Number of inlets/outlets: 3
• Observe system fill quantity:
• Hose Type: Moulded Hose
• Material: Rubber with fabric lining
• Nimetus: JAHUTUSVOOLIK
• Tootja: HAN

Cooling Hose: from engine to engine cooler, from engine cooler to expansion tank General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Length [mm]: 215
• Weight [kg]: 0.432
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Kinnitusaukude hulk: 2
• Kaal (kg): 0,52
• Aukude arv: 3
• Kaal (g): 520
• Tootja: METALCAUCHO

• Weight [kg]: 0.43
• Nimetus: JAHUTUSVEDELIKU TORUSTIK
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.