• Lülituspunkt alates [bar]: 0,15
• Lülituspunkt kuni [bar]: 0,35
• Värvimarkeering: sinine
• Ühenduste arv: 1
• Väliskeere [mm]: M10x1
• Tootja: JP GROUP
• Lisainfo: PAKENDIS 10 tk

• Pistikkontaktide arv: 2
• Värv: valge
• Väliskeere [mm]: M14x1.5
• Tootja: JP GROUP
• Lisainfo: Temperature sensor for cooling system, 10/20/80 C

• Tootja piirang: BOSCH
• Tootja: JP GROUP
• Lisainfo: Hall sender

• Pistikkontaktide arv: 7
• Mähised-Süütesüsteem: Transistorsüüde(TZ)
• Tootja: JP GROUP
• Lisainfo: Switch unit for TCI

• Värv: must
• Pistikkontaktide arv: 1
• Tootja: DELLO AUTOMEGA

• Keermemõõt: M10x1
• Pikkus (mm): 46
• Võtmekaugus: 24
• Pistikkontaktide arv: 1
• Värv: must
• Tootja: DELLO AUTOMEGA

• Keermemõõt: M10x1
• Pikkus (mm): 46
• Võtmekaugus: 24
• Värvimarkeering: valge
• Pistikkontaktide arv: 1
• Tootja: DELLO AUTOMEGA

• Keermemõõt: M10x1
• Pikkus (mm): 46
• Võtmekaugus: 24
• Värv: sinine
• Pistikkontaktide arv: 1
• Tootja: DELLO AUTOMEGA

• Kerenumber (VIN) kuni: 32-J-299 999
• Keermemõõt: M10x1
• Värv: must
• Pistikkontaktide arv: 1
• Võtmekaugus: 14
• Pikkus (mm): 25
• Tootja: DELLO AUTOMEGA

• Lülituspunkt alates [bar]: 1,6
• Lülituspunkt kuni [bar]: 2
• Tootja: JP GROUP
• Lisainfo: PAKENDIS 10 tk

• Keermemõõt: M 10x1
• Korpusevärv: must
• Surve (bar): 0,4
• Tootja: FAE

• Pikkus (mm): 52
• Võtmekaugus: 19
• Korpusevärv: valge
• Tootja: KAMOKA

• Ehitusaasta alates: 01.1987
• Lülituspunkt alates [bar]: 0,75
• Lülituspunkt kuni [bar]: 1,05
• Väliskeere [mm]: M10x1
• Ühenduste arv: 1
• Värvimarkeering: hall
• Lisainfo: PAKENDIS 10 tk

• Lülituspunkt alates [bar]: 0,15
• Pikkus (mm): 46
• Lülituspunkt kuni [bar]: 0,35
• Siseläbimõõt [mm]: 2,54
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 13
• Võtmekaugus: 24
• Ühenduste arv: 1
• Värvimarkeering: sinine
• Pealispind: tsingitud
• Kaal (kg): 0,031
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: OLISURVELšLITUS
• Tootja: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pikkus (mm): 46
• Võtmekaugus: 24
• Värvimarkeering: sinine
• Pistikkontaktide arv: 1
• Keermemõõt: M10x1
• Surve alates (bar): 0,15
• Surve (bar) kuni: 0,35
• Läbimõõt [mm]: 3
• Nimetus: OLISURVELšLITUS
• Tootja: MAX

• Pikkus (mm): 46
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Värvimarkeering: valge
• Pistikkontaktide arv: 1
• Surve (bar): 1,8
• Nimetus: OLISURVELšLITUS
• Tootja: MAX

• Ehitusaasta alates: 01.1987
• Pikkus (mm): 46
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Värvimarkeering: hall
• Pistikkontaktide arv: 1
• Surve alates (bar): 0,75
• Surve (bar) kuni: 1,05
• Läbimõõt [mm]: 2
• Nimetus: OLISURVELšLITUS
• Tootja: MAX

• Keermemõõt: M10x1,0
• Värv: must
• Ühenduste arv: 1
• Kaal (kg): 0,019
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Surve (bar): 3,5
• Korpusevärv: sinine
• Keermemõõt: M10×1-6g
• Läbimõõt [mm]: 24
• Võtmekaugus: 24
• Pistikkontaktide arv: 1
• Tootja: DELPHI
• Nimetus: DE SW90009
• Lisainfo: SW90009

• Pikkus (mm): 46
• Lülituspunkt alates [bar]: 0,15
• Lülituspunkt kuni [bar]: 0,35
• Siseläbimõõt [mm]: 2,54
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 13
• Võtmekaugus: 24
• Ühenduste arv: 1
• Värvimarkeering: sinine
• Pealispind: tsingitud
• Kaal (kg): 0,031
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: SW 30 23 0002
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Keermemõõt: M 10x1 con.
• Korpusevärv: must
• Surve (bar): 0,4
• Tootja: FAE

• Mootorikood: KV, HY
• Surve alates (bar): 0,15
• Surve (bar) kuni: 0,45
• Värv: sinine
• Surve (bar): 0,3
• Keermemõõt: M10 x 1
• Kaal (kg): 0,036
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lülituspunkt alates [bar]: 1,6
• Pikkus (mm): 46
• Lülituspunkt kuni [bar]: 2
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 13
• Võtmekaugus: 24
• Ühenduste arv: 1
• Värvimarkeering: valge
• Pealispind: tsingitud
• Kaal (kg): 0,03
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: OLISURVELšLITUS
• Tootja: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• vajaminev tükihulk: 1
• Ehitusaasta alates: 01.1987
• Värv: hall
• Surve (bar): 0,9
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Pikkus (mm): 25
• Temperatuurivahemik kuni [°C]: 125
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 10,9
• Võtmekaugus: 14
• Ühenduste arv: 1
• Värvimarkeering: must
• Kaal (kg): 0,012
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Värv: sinine
• Lülituspunktid [bar]: 0,25
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Värv: valge
• Surve (bar): 1,8
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Mootorikood: KV
• Surve (bar): 1,8
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Tootja: FACET

• Mootorikood: KV
• Surve (bar): 1,8
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Nimetus: OLISURVELšLITUS
• Tootja: EPS

• Piirangutega toode/piirangu info: koos tihendiga
• Keermemõõt: M10x1,0
• Lülitusulatus (bar): 0,15 - 0,35
• Värv: sinine
• Kaal (kg): 0,038
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pikkus (mm): 46
• Lülituspunkt alates [bar]: 1,6
• Lülituspunkt kuni [bar]: 2
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 13
• Võtmekaugus: 24
• Ühenduste arv: 1
• Värvimarkeering: valge
• Pealispind: tsingitud
• Kaal (kg): 0,03
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: SW 30 23 0001
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Surve alates (bar): 0,15
• Surve (bar) kuni: 0,35
• Lüliti funktsioon: avaja
• Värv: sinine
• Võtmekaugus: 24
• Keermemõõt: M10 x 1,0
• Pistikkontaktide arv: 1
• Nimetus: OLISURVELšLITUS
• Tootja: MEY

• Surve (bar): 0,25
• Keermemõõt: M10 x 1
• tehnilise informatsiooni number: circuit N.C.
• Tootja: ERA

• Anduritüüp: NTC-andur
• Keermemõõt: M10x1
• Värv: valge
• Pistikkontaktide arv: 2
• temperatuurivahemik alates [°C]: −40
• Temperatuurivahemik kuni [°C]: 150
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MAX

• Temperatuurivahemik kuni [°C]: 125
• Pikkus (mm): 25
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 10,9
• Võtmekaugus: 14
• Ühenduste arv: 1
• Värvimarkeering: must
• Kaal (kg): 0,012
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: SW 99 90 1939
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Anduritüüp: NTC-andur
• Keermemõõt: M10x1,0
• Võtmekaugus: 13
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Värv: must
• Pistikkontaktide arv: 1
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MEY
• Lisainfo: 1009190015

• Pistikkontaktide arv: 1
• Surve (bar): 0,3
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Ehitusaasta alates: 01.1987
• Lülituspunkt alates [bar]: 0,75
• Pikkus (mm): 46
• Lülituspunkt kuni [bar]: 1,05
• Siseläbimõõt [mm]: 2,48
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 13
• Võtmekaugus: 24
• Ühenduste arv: 1
• Värvimarkeering: hall
• Lülituspunktid [bar]: 0,7
• Pealispind: tsingitud
• Kaal (kg): 0,031
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: OLISURVELšLITUS
• Tootja: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Keermemõõt: M10x1,0
• Värv: valge
• Kaal (kg): 0,033
• Surve alates (bar): 1,6
• Surve (bar) kuni: 2
• Tootja: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Ehitusaasta alates: 01.1987
• Lülituspunkt alates [bar]: 0,75
• Pikkus (mm): 46
• Lülituspunkt kuni [bar]: 1,05
• Siseläbimõõt [mm]: 2,48
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 13
• Võtmekaugus: 24
• Ühenduste arv: 1
• Värvimarkeering: hall
• Lülituspunktid [bar]: 0,7
• Pealispind: tsingitud
• Kaal (kg): 0,031
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: SW 30 23 0004
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Väändejõud alates [Nm]: 20
• Pinge [V]: 12
• Lüliti funktsioon: Lukustaja
• Voolutugevus (A): 0,25
• Tolerants (%): 15
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Surve alates (bar): 1,6
• Surve (bar) kuni: 2
• Pistikkontaktide arv: 1
• Vastab originaalosa värvile: piimvalge
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Tootja: HELLA
• Nimetus: HE 6ZL003259441

• Temperatuurivahemik kuni [°C]: 125
• Väliskeere [mm]: M10 x 1
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Kaablipikkus (mm): 730
• Tootja: KAMOKA

• Anduritüüp: NTC-andur
• Keermemõõt: M14x1,5
• Võtmekaugus: 19
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Värv: valge
• Pistikkontaktide arv: 2
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MEY

• Mootorikood: KV, HY
• Surve alates (bar): 0,15
• Surve (bar) kuni: 0,45
• Värv: sinine
• Tootja: BOSCH

• Värv: roheline, must
• Tootja: DELLO AUTOMEGA

• Pikkus (mm): 52
• Väliskeerme mõõde: M14 x 1,5
• Võtmekaugus: 19
• Ühenduste arv: 2
• Värv: valge
• Materjal: Messing, Plastik
• Kruvipikkus kruvipea all [mm]: 28
• Kaal (kg): 0,03
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Anduritüüp: NTC-andur
• Keermemõõt: M10x1,0
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Värv: valge
• Pistikkontaktide arv: 2
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MEY

• OE-numbri jaoks: 035906265B
• valikuliselt:
• Lambda andur: Titaanandur
• Tootja: DELLO AUTOMEGA

• Lambda andur: kütmata
• Lisainfo: Lambda sensor