Tootekategooriad
Filter Pidurid Šassii Roolimine Jahutus/kliima Elektrisüsteem Lisad Jõuülekanne Väljalaskesüsteem Kere Süüte-/eelsüütesüsteem Mootor Klaasid/klaasipuhastus Valgustus Kütusesüsteemi seadmed Kabiinivarustus HooldusToode
Kirjeldus
Laoseis
Hind
(km-ga)
Tootja: DELLO AUTOMEGA
- Material: Plastic
- Colour: blue
-
Supplementary Article/Supplementary Info: with gasket/
seal - Mounting Type: Screw Connection
- Thread Type: External Thread
- Tootja: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Kogus pakendis: 4
- Diameter [mm]: 63
- Height [mm]: 38
- Weight [kg]: 0.07
- Switch point to [bar]: 1.6
- Pressure [bar]: 1.4
- Colour: blue
- Material: Plastic
- Inner Diameter [mm]: 35.5
- Outer Diameter [mm]: 80
- Weight [g]: 70
- Thread Size 1: M3
- Tootja: METALCAUCHO
- Thread Size: M63x3
- Colour: blue
- Material: Plastic
-
Nimetus: SULGURKATE,
JAHUTUSVEDELIKU MAHUTI - Tootja: MAX
- Weight [kg]: 0.056
- Opening Pressure [bar]: 1.2
- Tootja: 3RG
- Pressure [bar]: 1.5
- Colour: blue
- Lisainfo: Cap for expansion tank
- for OE number: 95510644720
- Tootja: KAMOKA
- Material: Plastic
- Opening Pressure [bar]: 1.5
- Guarantee: 3 years guarantee
- Weight [kg]: 0.07
- Always compare old and new part (in particular OE No.):
- Nimetus: CE 61SKV011
- Tootja: ESEN SKV
- Weight [kg]: 0.16
- Switch point from [bar]: 1.4
- Switch point to [bar]: 1.6
- Required quantity: 1
- Colour: blue
- Material: Plastic
- General Information: cap for expansion tank
- Tootja: VIKA
- for OE number: 1J0121321A
- Pressure [bar]: 1.5
- Colour: blue
- Weight [g]: 71
- Nimetus: IM 43000
- Tootja: ORIGINAL IMPERIUM
- Ehitusaasta alates: 07.2000
- Ehitusaasta kuni: 05.2002
- Thread Size: M45x3
- Pressure [bar]: 1.5
- Tootja: BGA
- General Information: cap for expansion tank
- Tootja: VIKA
- Material: Plastic
- Opening Pressure [bar]: 1.5
- Guarantee: 3 years guarantee
- Weight [kg]: 0.08
- Always compare old and new part (in particular OE No.):
- Tootja: SKV GERMANY
- Nimetus: CE 61SKV012
Tootja: NRF KLIMATYZACJA
- General Information: Expansion tank cap
- Tootja: BORSEHUNG
- Colour: blue
- Pressure [bar]: 1.5
- for OE number: 1J0121321B
- Weight [g]: 68.7
- Packaging length [cm]: 7.5
- Packaging width [cm]: 7.5
- Packaging height [cm]: 8.3
- Tootja: MOTORAD
- Pressure [bar]: 1.4
- Weight [g]: 67
- Nimetus: IM 43016
- Tootja: ORIGINAL IMPERIUM
- for OE number: 1J0 121 321 B
- Opening Pressure [bar]: 1.5
- Colour: blue
- Tootja: TRUCKTEC
- Pressure [bar]: 1.5
- Colour: blue
-
Nimetus: SULGURKATE,
JAHUTUSVEDELIKU MAHUTI - Tootja: MEY
- Opening Pressure [bar]: 1.5
- Colour: blue
- Tootja: 3RG
- for OE number: 025121321B
- Weight [g]: 69
- Nimetus: IM 43001
- Tootja: ORIGINAL IMPERIUM
- Pressure [bar]: 1.4
-
Nimetus: SULGURKATE,
JAHUTUSVEDELIKU MAHUTI - Tootja: VER
- Colour: blue
- Material: Plastic
- Opening Pressure [bar]: 1.5
-
Thread Size: M63 x 3,
0 - Weight [kg]: 0.16
- for OE number: 1J0 121 321 B
-
Nimetus: SULGURKATE,
JAHUTUSVEDELIKU MAHUTI - Tootja: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Pressure [bar]: 1.5
- Material: Plastic
- Tootja: METZGER
- Pressure [bar]: 1.5
-
Nimetus: SULGURKATE,
JAHUTUSVEDELIKU MAHUTI - Tootja: VER
- Pressure [bar]: 1.4
- Colour: blue
- Material: Plastic
- Tootja: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Colour: blue
- Material: Plastic
- Pressure from [bar]: 1.5
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Nimetus: Expansion tank
- Kvaliteediklass: PJ
Lisainfo: VW GOLF IV 97- (kvaliteediklass PJ)
- Pressure [bar]: 1.5
- Outer Diameter [mm]: 80
- Height [mm]: 27
- Pressure [psi]: 22
- Tootja: GATES
-
mitte riikidele: Hiina
(Taiwan), Jaapan - Material: Plastic
- Heating/Cooling: with coolant level switch connection
- Supplementary Article/Info 2: without lid
- Tootja: DELLO AUTOMEGA
-
mitte riikidele: Jaapan,
Hiina (Taiwan) - Heating/Cooling: with coolant level switch connection
- Consult accessories list for recommended additional repairs:
- Observe system fill quantity:
- Forward- /Backflow: with backflow
-
Supplementary Article/Info 2: without lid,
with sensor - Material: Plastic
- Tootja: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Supplementary Article/Supplementary Info: with coolant level sensor
- Supplementary Article/Info 2: without lid
- Material: Plastic
- Heating/Cooling: with coolant level switch connection
- Assy./disassy. by qualified personnel required!:
- Tootja: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- for OE number: 1J0121407
- Tootja: KAMOKA
- for OE number: 1J0 121 403 B
-
Fabrication Number: CZW-
VW- 003 - Tootja: NTY
-
Nimetus: NTY CZW-
VW- 003
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Kvaliteediklass: PJ
- Packaging length [cm]: 6.3
- Packaging width [cm]: 6.3
- Packaging height [cm]: 6.3
- Net Weight [g]: 60
- Tootja: MAHLE BEHR HELLA TERMIKA
- Net Weight [g]: 69
- Packaging length [cm]: 9.1
- Packaging width [cm]: 9.1
- Packaging height [cm]: 9.1
- Nimetus: MH CRB135000S
- Tootja: MAHLE
- Number of pins: 2
-
Nimetus: PAISUPAAK,
JAHUTUSVEDELIK - Tootja: MAX
- Nimetus: Expansion tank
- Kvaliteediklass: PJ
Lisainfo: NEW BEETLE 98- (kvaliteediklass PJ)
- Kvaliteediklass: PJ
- Nimetus: Expansion tank
- Material: Plastic
- Heating/Cooling: with coolant level switch connection
- Supplementary Article/Info 2: without lid
- Lisainfo: Expansion tank for radiator
- Supplementary Article/Info 2: without cover
- Guarantee: 3 years guarantee
- Article number of recommended accessories: 61SKV010
- Weight [kg]: 0.52
- Always compare old and new part (in particular OE No.):
- Nimetus: CE 61SKV307
- Tootja: ESEN SKV
- Weight [kg]: 0.29
- Supplementary Article/Info 2: with sensor
- Tootja: METALCAUCHO
-
mitte riikidele: Jaapan,
Hiina (Taiwan) - Supplementary Article/Supplementary Info: with coolant level sensor
- Supplementary Article/Info 2: with sealing plug
- Pressure [bar]: 1.4
- Tootja: VERNET
- for OE number: 95510644720
- Weight [g]: 537
- Supplementary Article/Info 2: with sealing plug
-
Nimetus: Paisupaak,
jahutusvedelik - Tootja: IMP
- Weight [kg]: 0.315
- Required quantity: 1
- Number of connectors: 2
- Supplementary Article/Info 2: with sensor
- General Information: expansion tank
- Tootja: VIKA
-
mitte riikidele: Jaapan,
Hiina (Taiwan) - Supplementary Article/Supplementary Info: with coolant level sensor
- Supplementary Article/Info 2: with sealing plug
- Pressure [bar]: 1.5
- Tootja: VERNET
- Pressure [bar]: 1.5
- Supplementary Article/Info 2: with cover
- Guarantee: 3 years guarantee
- Article number of recommended accessories: 61SKV010
- Weight [kg]: 0.57
- Always compare old and new part (in particular OE No.):
- Tootja: SKV GERMANY
- Nimetus: CE 61SKV308
- Width [mm]: 190
- Height [mm]: 160
-
Supplementary Article/Info 2: with sensor,
with cap -
Nimetus: Paisupaak,
jahutusvedelik - Tootja: NRF
- Supplementary Article/Info 2: without lid
-
Nimetus: PAISUPAAK,
JAHUTUSVEDELIK - Tootja: MEY
- Number of connectors: 2
- Supplementary Article/Supplementary Info: with coolant level sensor
- Supplementary Article/Info 2: without lid
- Weight [kg]: 0.315
- for OE number: 1J0 121 403 B
-
Nimetus: PAISUPAAK,
JAHUTUSVEDELIK - Tootja: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Plastic
- Packaging length [cm]: 19
- Packaging width [cm]: 18.5
- Packaging height [cm]: 16.5
- Weight [kg]: 1.16
- for OE number: 1J0121403B
- Tootja: AKSDASIS
- Number of connectors: 2
- Supplementary Article/Supplementary Info: with coolant level sensor
- Supplementary Article/Info 2: without lid
- Weight [kg]: 0.315
- for OE number: 1J0 121 403 B
- Nimetus: SW 30 93 7324
- Tootja: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Supplementary Article/Info 2: without lid
- Supplementary Article/Supplementary Info: with coolant level sensor
- Article number of recommended accessories: 2140060
- Tootja: METZGER
- Length [mm]: 184
- Width [mm]: 172
- Height [mm]: 184
- Material: Plastic
- Colour: white
- Supplementary Article/Supplementary Info: without coolant level sensor
- Additionally required articles (article numbers): CRB 135 000S
- Supplementary Article/Info 2: without lid
- Packaging height [cm]: 16.5
- Packaging length [cm]: 18.5
- Packaging width [cm]: 18.5
- Net Weight [g]: 324
- Tootja: MAHLE
- Capacity [litre]: 0.85
- Material: Plastic
- Supplementary Article/Info 2: with lid
- Supplementary Article/Supplementary Info: with coolant level sensor
-
Technical Information: FIRST FIT -
Includes caps and sensors when needed - Tootja: NISSENS
- General Information: expansion tank
- Tootja: BORSEHUNG
- Supplementary Article/Supplementary Info: with coolant level sensor
- Supplementary Article/Info 2: without lid
- for OE number: 4F0121403C
- Assy./disassy. by qualified personnel required!:
- Tootja: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Supplementary Article/Info 2: with lid
- General Information: expansion tank; with cap
- Tootja: BORSEHUNG
-
mitte riikidele: Jaapan,
Hiina (Taiwan) - Fitting Position: Front
-
Supplementary Article/Info 2: without lid,
with sensor - Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universaaltooted
TecDoc sõidukite kataloog
TecDoc veokite kataloog