• Fitting Position: Front Axle both sides
• Number of Teeth: 49
• Material: Steel
• Inner Diameter [mm]: 72
• Outer Diameter [mm]: 82
• Fabrication Number: NZA-VV-002
• Tootja: NTY
• Nimetus: NTY NZA-VV-002

• Fitting Position: Rear Axle
• Sensor Type: Hall Sensor
• Number of connectors: 2
• Lisainfo: Sensor, wheel speed

• Installatsiooni pool: esisild vasakul, esisild paremal
• Sensor Type: Hall Sensor
• Braking/Drive Dynamics: for vehicles without ESP
• Tootja: JP GROUP
• Lisainfo: Sensor, wheel speed

• Installatsiooni pool: esisild mõlemapoolselt
• Width [mm]: 8.6
• Number of Teeth: 48
• Outer Diameter [mm]: 82
• Inner Diameter [mm]: 72
• Nimetus: ANDUR,ABS
• Tootja: MAX
• Lisainfo: 27-0357

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-FR-011
• Tootja: NTY
• Nimetus: NTY HCA-FR-011

• Width [mm]: 8.6
• Outer Diameter [mm]: 81.3
• Inner Diameter [mm]: 71.9
• Fitting Position: Front Axle both sides
• Number of Teeth, ABS ring: 48
• Weight [kg]: 0.06
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Fabrication Number: HCA-FR-010
• Tootja: NTY

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-MZ-019
• Tootja: NTY

• Installatsiooni pool: esisild mõlemapoolselt
• Inner Diameter [mm]: 71.9
• Width [mm]: 8.6
• Outer Diameter [mm]: 81.5
• Number of Teeth, ABS ring: 48
• Nimetus: ANDUR,ABS
• Tootja: TRI
• Lisainfo: VOLVO

• Fitting Position: Rear Axle Left, Rear Axle Right
• Braking/Drive Dynamics: for vehicles with ABS
• Supplementary Article/Info 2: without cable
• Fabrication Number: HCA-MZ-018

• Fitting Position: Front Axle
• Supplementary Article/Info 2: without cable
• Sensor Type: Active sensor
• Tootja: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Rear Axle
• Tootja: MAGNETI MARELLI

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: without cable
• Sensor Type: Active sensor
• Tootja: KAMOKA UK£ADY HAMULCOWE

• Installatsiooni pool: esisild mõlemapoolselt
• Ühenduste arv: 2
• Tootja: JPN

• Fitting Position: Front Axle
• for OE number: 3M5T2B372AB
• Number of pins: 2
• Number of mounting bores: 1
• Tootja: MAGNETI MARELLI

• Ehitusaasta kuni: 07.2010
• Fitting Position: Rear Axle
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Overall Length [mm]: 38
• Nimetus: ANDUR, RATTAP™™RETE ARV
• Tootja: MAX
• Lisainfo: 1481190/MG

• Fitting Position: Front Axle Left
• Fabrication Number: HCA-VV-014

• Installatsiooni pool: Esisild
• Kerenumber (VIN) kuni: 191726
• Ehitusaasta kuni: 12.2010
• Number of pins: 2
• Tootja: DELLO AUTOMEGA

• Fitting Position: Front Axle both sides
• Tootja: ASHIKA

• Installatsiooni pool: esisild mõlemapoolselt
• Tootja: JAPKO

• Hammastehulk: 48
• Välisläbimõõt [mm]: 81
• Siseläbimõõt [mm]: 72
• Laius (mm): 8,6
• Tootja: METZGER

Installatsiooni pool: esisild mõlemapoolselt, esisild vasakul, esisild paremal

• vajaminev tükihulk: 2
• Kerenumber (VIN) kuni: 191726
• Plokieraldus:
• Kerenumber (VIN) alates: 191727
• Fitting Position: Front Axle
• Fitting Depth [mm]: 25
• Number of pins: 2
• Nimetus: ANDUR, RATTAP™™RETE ARV
• Tootja: MAX
• Lisainfo: 1223620/MG

• Fabrication Number: NZA-VV-003

Fitting Position: Rear Axle, Rear Axle both sides, Left, Right, Wheel Side

• Installatsiooni pool: Esisild
• vajaminev tükihulk: 2
• Piirangutega toode/piirangu info 2: ilma kaablita
• Tootja: DENCKERMANN FILTRY

• Installatsiooni pool: Tagasild paremal, Tagasild vasakul
• Number of pins: 2
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 14
• Vehicle Equipment: for vehicles without parking distance control
• Tootja: AUTOFREN SEINSA
• Nimetus: SE DS0020

• vajaminev tükihulk: 2
• Installatsiooni pool: Tagasild
• Piirangutega toode/piirangu info 2: ilma kaablita
• Tootja: DENCKERMANN FILTRY

• Fitting Position: Rear Axle both sides
• Tootja: ASHIKA

• Installatsiooni pool: Tagasild mõlemapoolselt
• Tootja: JAPKO

• Installatsiooni pool: esisild paremal, esisild vasakul
• Sensor Type: Active sensor
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Braking/Drive Dynamics: for vehicles without ESP
• Fitting Depth [mm]: 25
• Tootja: AUTOFREN SEINSA

• Fitting Position: Rear Axle both sides
• Nimetus: ANDUR, RATTAP™™RETE ARV
• Tootja: JPA

• vajaminev tükihulk: 2
• Installatsiooni pool: Esisild
• Supplementary Article/Info 2: without cable
• Nimetus: CZUJNIK ABS FORD P. MONDEO IV
• Tootja: BRM

• Installatsiooni pool: Tagasild
• Overall Length [mm]: 38
• Length [mm]: 14
• Sensor Type: Active sensor
• Socket colour: black
• paired article number: 30131
• Weight [kg]: 0.08
• Tootja: A.B.S.

• Installatsiooni pool: Esisild
• Kerenumber (VIN) alates: 191727
• Värv: must
• Anduritüüp: Aktiivne andur
• Pikkus (mm): 25
• Tootja: JPN

• Fitting Position: Front Axle both sides
• Nimetus: ANDUR, RATTAP™™RETE ARV
• Tootja: JPA

• Pikkus (mm): 38
• Anduritüüp: Aktiivne andur
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Tootja: FAST

• Installatsiooni pool: Esisild, esisild paremal, esisild vasakul
• Tootja: AUTO-GH

• Fitting Position: Rear Axle
• Number of pins: 2
• Plug Type: Male
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.02
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Nimetus: CE 06SKV004
• Tootja: ESEN SKV

• Fitting Position: Front Axle
• Length [mm]: 43
• Sensor Type: Active sensor
• Tootja: KAVO

• vajaminev tükihulk: 2
• Installatsiooni pool: Tagasild
• Sensor Type: Hall Sensor
• Tootja: DELLO AUTOMEGA

• Pikkus (mm): 14
• Anduritüüp: Aktiivne andur
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Tootja: FAST

• Installatsiooni pool: Tagasild mõlemapoolselt
• Ühenduste arv: 2
• Tootja: JPN

• Fitting Position: Front Axle
• Number of pins: 2
• Plug Type: Male
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.02
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Tootja: SKV GERMANY
• Nimetus: CE 06SKV001

• Ehitusaasta kuni: 12.2010
• Fitting Position: Front Axle
• Rated Voltage [V]: 12
• Guarantee: 5 years guarantee
• Tootja: HUCO

• Mootorikood: B 4184 S11
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• vajaminev tükihulk: 2
• Sensor Length [mm]: 14
• Nimetus: EP 1.960.018
• Tootja: EPS

• Installatsiooni pool: Esisild
• Overall Length [mm]: 55
• Length [mm]: 25
• Sensor Type: Active sensor
• Socket colour: black
• paired article number: 30130
• Weight [kg]: 0.08
• Tootja: A.B.S.

• Installatsiooni pool: Esisild, esisild paremal, esisild vasakul
• Tootja: AUTO-GH

• Installatsiooni pool: esisild mõlemapoolselt
• Fitting Position: Front Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Rated Voltage [V]: 12
• Weight [kg]: 0.008
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• vajaminev tükihulk: 2
• Installatsiooni pool: Tagasild
• Supplementary Article/Info 2: without cable
• Nimetus: CZUJNIK ABS FORD T. C-MAX 03- LE/PR
• Tootja: BRM

• Piduri-/sõidudünaamika: Sõidukile koos ESP
• Fitting Position: Front Axle
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: blue
• Sensor Type: Hall Sensor
• Tootja: FAE

• Mootorikood: B 4184 S11
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Hulk: 2
• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Number of connectors: 2
• Rated Voltage [V]: 12
• Weight [kg]: 0.01
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mootorikood: B 4184 S11
• Kerenumber (VIN) kuni: 191726
• Installatsiooni pool: esisild vasakul, esisild paremal
• vajaminev tükihulk: 2
• Sensor Length [mm]: 24.9
• Nimetus: EP 1.960.005
• Tootja: EPS

• Installatsiooni pool: Esisild
• vajaminev tükihulk: 2
• Kerenumber (VIN) kuni: 191726
• Plokieraldus:
• Kerenumber (VIN) alates: 191727
• Fitting Depth [mm]: 25
• Number of pins: 2
• Nimetus: ANDUR, RATTAP™™RETE ARV
• Tootja: TRI

• Installatsiooni pool: Tagasild
• Plokieraldus:
• Hulk: 2
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Nimetus: ANDUR, RATTAP™™RETE ARV
• Tootja: DLP

• Installatsiooni pool: Tagasild
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Tootja: TRW

SVHC: No information available, please contact the manufacturer!

• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Fitting Position: Rear Axle
• Nimetus: ANDUR, RATTAP™™RETE ARV
• Tootja: MEY

• vajaminev tükihulk: 2
• Supplementary Article/Info 2: without cable
• Sensor Type: Hall Sensor
• Fitting Position: Rear Axle
• Number of pins: 2
• Tootja: FAE

• Number of connectors: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.007
• Nimetus: ANDUR, RATTAP™™RETE ARV
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: esisild vasakul, esisild paremal
• Plokieraldus:
• Number of connectors: 2
• Weight [kg]: 0.009
• Tootja: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Esisild
• vajaminev tükihulk: 2
• Supplementary Article/Info 2: without cable
• MAPP code available:
• Tootja: ATE

• Ehitusaasta kuni: 12.2010
• vajaminev tükihulk: 2
• Kerenumber (VIN) kuni: 191726
• Voltage [V]: 12
• Fitting Position: Front Axle
• Assy./disassy. by qualified personnel required!:
• Tootja: HELLA
• Nimetus: HE 6PU012039961

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Installatsiooni pool: Esisild
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Nimetus: ANDUR, RATTAP™™RETE ARV
• Tootja: DLP
• Kvaliteediklass: PJ

• Installatsiooni pool: paremal, vasakul, Tagasild
• Tootja: SNR /NTN-SNR/

• Installatsiooni pool: Tagasild
• vajaminev tükihulk: 2
• Anduritüüp: Hallsensor
• Tootja: METZGER

• Fitting Position: Brake Booster
• Brake System: ATE
• Tootja: ATE

• Ehitusaasta kuni: 12.2010
• Installatsiooni pool: Tagasild
• vajaminev tükihulk: 2
• Voltage [V]: 12
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 6PU012039971
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Mootorikood: B 4184 S11
• Installatsiooni pool: Esisild
• Tootja: PIERBURG

• Fitting Position: Rear Axle Left, Rear Axle Right
• Number of pins: 4
• Fabrication Number: HCA-FR-022

• Ehitusaasta kuni: 07.2010
• Installatsiooni pool: Tagasild
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Overall Length [mm]: 38
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Nimetus: ANDUR, RATTAP™™RETE ARV
• Tootja: BOS

• Installatsiooni pool: Esisild, esisild vasakul
• paaris tootenumbrid: GH-704814H
• Tootja: AUTO-GH

• Installatsiooni pool: Esisild
• Pistikkontaktide arv: 2
• Vastab originaalosa värvile: must
• Tootja: METZGER

• Ehitusaasta kuni: 07.2010
• Installatsiooni pool: Esisild
• Kerenumber (VIN) kuni: 192315
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Overall Length [mm]: 55
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Tootja: BOSCH

• Fitting Position: Brake Booster
• Connector Shape: D Shape
• Number of pins: 3
• for OE number: 163 540 12 17
• Brake System: ATE
• Weight [kg]: 0.064
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.